Download Craftsman 247.887760 Lawn Mower User Manual
Transcript
Operator's PRO Manual E S S I 0 21" SELF PROPELLED N A MOWER Model No. 247.887760 o SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST CAUTION: Before using this product, read this manual and follow all safety rules and operating instructions. Sears Brands Management o ESPANOL, p. 43 Corporation, Visit our website: Hoffman www.craftsman.com Estates, IL 60179, U.S.A. FORMNO. 769-04706B 1/4/2010 WarrantyStatement .................................. Page2 SafeOperationPractices .......................... Pages3-6 SlopeGuide.............................................. Page7 SafetyLabels............................................ Page9 Assembly .................................................. Pages10-13 Operation .................................................. Pages14-15 ServiceandMaintenance ......................... Pages16-21 Off-SeasonStorage .................................. Page22 TroubleShooting ....................................... Page23 PartsList................................................... Page24-38 Espa_ol ..................................................... Page43 ServiceNumbers...................................... BackCover Craftsman Professional Full Warranty If this Craftsmanproductfails due to a defectin materialor workmanshipwithintwo yearsfrom thedateof purchase,returnitto any Searsstore, SearsServiceCenter,or other Craftsmanoutletin the UnitedStatesfor free repair(or replacementif repairprovesimpossible). This warrantyappliesfor onlyone yearifthis product iseverusedforcommercialor rentalpurposes. Thiswarranty coversONLYdefects in material and workmanship. Sears will NOT payfor: • • • Expendableitemswhichcan wearout from normaluse withinthe warrantyperiod,suchas rotarymowerblades,bladeadapters,belts, filters,or sparkplugs. Repairsnecessarybecauseof accident,such as bentcrankshafts,or failureto operateor maintainthe productaccordingto all supplied instructions. Preventativemaintenanceor repairsnecessarydue to improper fuel mixture,contaminatedor stale fuel. This warrantygivesyou specificlegal rights,and you mayalso haveotherrightswhich vary from stateto state. Sears, Roebuck and Co., NoffmanEstates, IL 60179 EngineOil Type: SAE30 EngineOil Capacity: Fuel: 18ounces UnleadedGasoline SparkPlug: Engine: Champion®RC12YC Bdggs& Stratton © Sears Brands,LLC Model Number................................................................. Serial Number ................................................................. Dateof Purchase............................................................. Recordthe modelnumber,serialnumber and dateof purchaseabove 2 This machinewas builtto be operatedaccordingto the safeoperation practicesin this manual.As with anytype of powerequipment, carelessnessor error on the partof the operatorcan resultin serious injury.This machineis capableof amputatingfingers,hands,toes and feet and throwingdebris.Failureto observethe followingsafety instructionscouldresultin seriousinjuryor death. This symbolpointsout importantsafetyinstructionswhich,if not followed,couldendangerthepersonalsafetyand/orpropertyof yourselfand others. Readand followall instructionsin this manual beforeattemptingto operatethis machine.Failureto complywith these instructionsmay resultin personalinjury.Whenyou seethis symbol,HEEDITS WARNING! CALIFORNIA PROPOSITION 65 Your Responsibility--Restrict the useof this powermachineto personswho read,understandand follow thewarningsand instructions in this manualand on the machine. EngineExhaust,someof its constituents,and certainvehicle componentscontainor emit chemicalsknownto Stateof California to cause cancerand birthdefects or other reproductiveharm. Batteryposts,terminals,and relatedaccessoriescontainlead and leadcompounds,chemicalsknownto the Stateof Californiato cause cancerand reproductiveharm.Washhandsafter handling. GENERAL * , , , , , , , SAVE THESE INSTRUCTIONS! OPERATION • Readthis operator'smanual carefullyin its entiretybefore attemptingto assemblethis machine.Read,understand,and followall instructionson the machineand in the manualsbefore operation.Keepthis manualin a safe placefor futureand regular referenceand for orderingreplacementparts Be completelyfamiliarwith the controlsand the properuseof this machinebeforeoperatingit. This machineis a precisionpieceof powerequipment,not a plaything.Therefore,exerciseextremecautionat all times.This machinehas beendesignedto performonejob: to mowgrass. Do not useit for anyother purpose. Alwayswear safetyglassesor safetygogglesduring operation and while performingan adjustmentor repairto protectyoureyes. Thrownobjectswhich ricochetcancause seriousinjuryto the eyes. Wearsturdy,rough-soledwork shoesand close-fittingslacks and shirts.Shirtsand pantsthat coverthe arms and legsand steel-toedshoesare recommended.Neveroperatethis machine in bare feet,sandals,slipperyor light-weight(e.g.canvas)shoes. Donot put handsor feet near rotatingpartsor underthe cutting deck. Contactwith bladecan amputatefingers,hands,toesand feet. A missingor damageddischargecovercan causeblade contact or thrownobject injuries. Manyinjuriesoccur as a resultof the mowerbeing pulledoverthe foot during a fall causedby slippingor tripping.Do not holdon to the mowerif you are falling; releasethe handleimmediately. Neverallowchildrenunder 14 yearsof age to operatethis machine.Children14and over shouldreadand understandthe instructionsand safe operationpracticesin this manualand on the machineand shouldbe trainedand supervisedbyan adult. Only responsibleindividualswhoare familiarwith these rulesof safeoperationshouldbe allowedto usethis machine. Neverpullthe mowerback towardyouwhileyou are walking.If you mustback the mowerawayfrom a wallor obstructionfirst lookdownand behindto avoidtrippingand then followthese steps: 1. Stepbackfrom mowerto fully extendyourarms. Thoroughlyinspectthe area wherethe equipmentis to be used. Removeall stones,sticks,wire, bones,toysand otherforeign objects,whichcould be trippedoveror picked up and thrownby the blade.Thrownobjectscancause seriouspersonalinjury. Planyour mowingpatternto avoiddischargeof materialtoward roads,sidewalks,bystandersand the like.Also, avoiddischarging materialagainsta wall or obstruction,whichmay cause dischargedmaterialto ricochetback towardthe operator. 2. 3. Be sureyouare wellbalancedwith surefooting. Pullthe mowerback slowly,no morethan half waytoward you. 4. Repeatthese stepsas needed. Donot operatethe mowerwhileunderthe influenceof alcoholor drugs. Tohelp avoidbladecontactor a thrownobjectinjury, stayin operatorzonebehindhandlesand keepchildren,bystanders, helpersand pets at least 75 feet from mowerwhileit is in operation. Stopmachineif anyoneentersarea. Donot engagethe self-propelledmechanismon machinesso equippedwhilestartingengine. 3 • • The bladecontrolhandleis a safetydevice.Neverattemptto bypassits operation.Doingso makesthe safetydevice inoperative and may resultin personalinjurythroughcontactwith the rotatingblade.The bladecontrol handlemustoperateeasily in bothdirectionsand automaticallyreturnto the disengaged positionwhenreleased. Neveroperatethe mowerin wet grass.Alwaysbe sureof your footing. A slip and fall cancause seriouspersonalinjury.If you feelyou are losingyourfooting,releasethe bladecontrolhandle immediatelyand the bladewill stop rotatingwithinthreeseconds. • • Mowonly in daylightor good artificiallight.Walk,neverrun. Stopthe bladewhencrossinggraveldrives,walksor roads. • If the equipmentshouldstart to vibrateabnormally,stop the engineand checkimmediatelyfor the cause.Vibrationis generallya warningof trouble. Shutthe engineoff and wait untilthe bladecomesto a complete stop beforeremovingthe grass catcheror uncloggingthe chute. Thecuttingblade continuesto rotatefor a few secondsafterthe bladecontrol is released.Neverplaceany partof the body in the bladearea untilyou are surethe blade hasstoppedrotating. • • Neveroperatemowerwithoutpropertrail shield,dischargecover, grasscatcher,bladecontrolhandleor othersafety protectivedevicesin placeand working.Neveroperatemowerwith damaged safetydevices.Failureto do socan resultin personalinjury. Mufflerand engine becomehotand can causea burn.Do not touch. • Neverattemptto makea wheelor cuttingheightadjustmentwhile theengine is running. • Onlyuse partsand accessoriesmadeforthis machineby the manufactureras listedin the Partspagesof this Operator's Manual.Failureto do so can resultin personalinjury. Whenstartingengine,pull cordslowlyuntil resistanceis felt,then pull rapidly.Rapidretractionof startercord (kickback)willpull handand arm towardenginefasterthanyoucan let go. Broken bones,fractures,bruisesor sprainscould result. If situationsoccurwhich are not coveredin this manual,usecare and goodjudgement.Contact1-800-4MY-HOME® for information and assistance. • • SLOPE Do: o Mowacrossthefaced slopes;neverup and down.Exercise extremecautionwhenchangingdirectionon slopes. • Watchfor holes,ruts, rocks,hiddenobjects,or bumpswhich can causeyou to slip or trip. Tallgrass can hideobstacles. • Alwaysbe sureof yourfooting.A slipand fall can causeserious personalinjury.If you feelyou are losingyourbalance,release the blade controlhandleimmediatelyand the blade willstop rotatingwithinthree (3) seconds. Do Not: • • Donot mow neardrop-offs,ditchesor embankments,you could lose yourfootingor balance. Donot mow slopesgreaterthan 15degreesas shownon the slopegauge. Donot mowon wet grass.Unstablefootingcouldcauseslipping. CHILDREN Tragicaccidentscan occur if the operatoris not alertto the presence of children.Childrenare often attractedto themowerand the mowing activity.They do not understandthe dangers.Neverassumethat childrenwill remainwhereyou last saw them. Keepchildrenout of the mowingarea and underwatchfulcareof a responsibleadultotherthan theoperator. Be alertand turn moweroff if a child entersthe area. Beforeand whilemovingbackwards,look behindand down for small children. Useextremecare whenapproachingblindcorners,doorways, shrubs,trees,or otherobjectsthat mayobscureyourvision of a child whomay run intothe mower. Keepchildrenawayfrom hot or runningengines.They can suffer burnsfrom a hot muffler. Neverallowchildrenunder 14yearsof age to operatethis machine.Children14and overshouldreadand understandthe instructionsand safeoperationpracticesin this manualand on the machineand be trainedand supervisedby an adult. SERVICE Safe HandlingOf Gasoline: • OPERATION Slopesare a majorfactor relatedto slipand fall accidents,whichcan result in severeinjury.Operationon slopes requiresextra caution.If youfeel uneasyon a slope,do not mowit. Foryour safety,usethe Slope Guideincludedas partof this manualto measureslopesbefore operatingthis machineon a slopedor hillyarea. If the slopeis greater than 15degrees,do not mowit. • • • • 4 Toavoid personalinjuryor propertydamageuseextremecare in handlinggasoline.Gasolineis extremelyflammableand the vaporsare explosive.Seriouspersonalinjurycanoccur when gasolineis spilledon yourselfor yourclothes,whichcan ignite. Washyour skin and changeclothesimmediately. Useonly an approvedgasolinecontainer. Neverfill containersinsidea vehicleor on a truck or trailer bed with a plasticliner.Alwaysplacecontainerson theground away from yourvehiclebeforefilling. Removegas-poweredequipmentfrom thetruck or trailerand refuelit on the ground.If this is notpossible,then refuelsuch equipmenton a trailer witha portablecontainer,ratherthanfrom a gasolinedispensernozzle. Keepthe nozzlein contactwith the rimof the fueltank or containeropeningat all timesuntilfuelingis complete.Donot use a nozzlelock-opendevice. • • • • Extinguishall cigarettes,cigars,pipesand othersources of ignition. Neverfuelmachineindoorsbecauseflammablevaporswill accumulatein the area. Neverremovegas cap or add fuel whileengineis hotor running. Allowengineto coolat leasttwo minutesbeforerefueling. Neveroverfill fuel tank.Toallowfor expansionof the fuel,do not fill abovethe bottomof the fueltank neck. • • Replacegasolinecapand tighten securely. If gasolineis spilled,wipe it off the engineand equipment.Move machineto anotherarea.Wait5 minutesbeforestartingengine. • Neverstorethe machineor fuel containernear an open flame, sparkor pilot lightas on a waterheater,spaceheater,furnace, clothesdryer or othergas appliances. Toreducefirehazard,keepmachinefreeof grass,leaves,or otherdebrisbuild-up.Cleanup oil or fuel spillageand removeany fuelsoakeddebris. • Allowmachineto cool at least 5 minutesbeforestoring. GeneralService: • Neverrun an engine indoorsor ina poorlyventilatedarea.Engine exhaustcontainscarbonmonoxide,an odorlessand deadlygas. • Beforecleaning,repairing,or inspecting, makecertain the bladeand all movingparts havestopped.Disconnectthe spark plug wireand groundagainstthe engineto preventunintended starting. Checktheblade and enginemountingbolts at frequentintervals for propertightness.Also, visuallyinspectblade fordamage(e.g., bent, cracked,worn). Replaceblade with theoriginalequipment manufacture's(O.E.M.)bladeonly, listedin the Parts pagesof this manual.Useof parts whichdo not meetthe originalequipment specificationsmay leadto improperperformanceand compromise safety! • Mowerbladesare sharpand can cut. Wrapthe bladeor wear gloves,and use extracautionwhen servicingthem. Keepall nuts,bolts,and screwstight to be suretheequipmentis in safeworkingcondition. Nevertamperwith safetydevices.Checktheirproperoperation regularly. After strikinga foreignobject, stopthe engine,disconnectthe sparkplug wireand groundagainstthe engine.Thoroughly inspectthe mowerfor anydamage.Repairthe damagebefore startingand operatingthe mower. Neverattemptto makea wheelor cuttingheightadjustmentwhile the engineisrunning. • Grasscatchercomponents,dischargecover,and trailshieldare subjectto wearand damagewhichcouldexposemovingparts or allowobjectsto be thrown.Forsafetyprotection,frequentlycheck componentsand replaceimmediately with originalequipment manufacturer's(O.E.M.)parts only,listed inthe Parts pages of this manual.Useof partswhich do notmeet the original equipmentspecificationsmay leadto improperperformanceand compromisesafety! Donot changethe engine'sgovernorsettingor over-speedthe engine.Thegovernorcontrolsthe maximumsafe operatingspeed of the engine. Checkfuel line,tank,cap, and fittings frequentlyfor cracksor leaks.Replaceifnecessary. • • Donot crankenginewith sparkplug removed. Maintainor replacesafetyand instruction labels,as necessary. Observeproperdisposallawsand regulations.Improperdisposal of fluids and materialscan harmthe environment. Accordingto theConsumerProductsSafetyCommission(CPSC) and the U.S.EnvironmentalProtectionAgency(EPA),this product hasan AverageUsefulLifeof seven(7) years,or 140hoursof operation.At the end of theAverageUsefulLifehavethe machine inspected annuallyby a Searsor otherqualifiedservicedealer to ensurethat all mechanicaland safetysystemsare working properlyand notwornexcessively.Failureto do so can result in accidents,injuriesor death. DO NOT MODIFY ENGINE Toavoidseriousinjuryor death,do not modifyengine inany way. Tamperingwith the governorsettingcanlead to a runawayengineand cause itto operateat unsafespeeds.Nevertamperwithfactory setting of engine governor.Doingso will voidthe productwarranty. NOTICE REGARDING EMISSIONS Engineswhich are certifiedtocomplywith Californiaand federal EPAemissionregulationsfor SORE(SmallOff RoadEquipment)are certifiedto operateon regularunleadedgasoline,and mayinclude the followingemissioncontrol systems:EngineModification(EM) and ThreeWay Catalyst(TWC)ifso equipped. SPARK ARRESTOR This machineisequippedwith an internalcombustionengineand shouldnotbe usedon or nearany unimprovedforest-covered,brush coveredor grass-coveredland unlesstheengine'sexhaustsystem isequippedwitha sparkarrestermeetingapplicablelocalor state laws (if any). If a sparkarresterisused, itshouldbe maintainedin effectiveworking order by theoperator.Inthe State of Californiathe aboveis required bylaw(Section4442 of the CaliforniaPublicResourcesCode). Other statesmayhavesimilarlaws. Federallawsapplyon federallands. A spark arresterfor the mufflerisavailablethroughyournearestSears Partsand RepairServiceCenter. SAFETY SYMBOLS This pagedepictsand describessafetysymbolsthat mayappear on this product. Read,understand,and followall instructionson the machine beforeattemptingto assembleand operate. i READ THE OPERATOR'S MANUAL(S) Read, understand, i and follow all instructions in the manual(s) before attempting to assemble and operate DANGER -- ROTATING BLADES To reduce the risk of injury, keep hands and feet away. Do not operate catcher is in its proper place. If damaged, unless discharge cover or grass replace immediately. ® DANGER -- BYSTANDERS Do not mow when children J or others are around. DANGER-- HAND/FOOT CUT Keep hands and feet away from rotating parts. DANGER -- THROWN DEBRIS Remove objects that can be thrown by the blade in any direction. Wear safety glasses. DANGER -- SLOPES Use extra caution on slopes. Do not mow slopes greater than 15°. WARNING--GASOLINE IS FLAMMABLE Allow the engine to cool at least two minutes WARNING-- CARBON MONOXIDE Never run an engine indoors monoxide, WARNING-- or in a poorly ventilated area. Engine exhaust contains carbon an odorless and deadly gas. HOT SURFACE Engine parts, especially muffler before refueling. the muffler, to cool before touching. 6 become extremely hot during operation. Allow engine and ! ! I 0 I 0 ! ! 0 o ! 0 ! _3 I COo ! ! GO 0 _l 0 o l l l l l m_ l l l l l CD GO o l l l CD l o l _m_ a 0 X J. c o 0 C_ © o o GO 7 This page left intentionally blank. 8 READOPERATOR'SMANUAL. KEEPSAFETYDEVICES(BLADECONTROL,TRAILINGSHIELD, DISCHARGECOVER,ETC.) IN PLACEANDWORKING. IF DAMAGED,REPLACEiMMEDiATELY. Operation Of This Equipment May Create Sparks That Can Start Fires Around Dry Vegetation. A Spark Arrestor May Be Required.The Operator Should Contact Loca! Fire , Agencies For Laws Or ReguJations To Fire Prevention Requirements. 9 IMPORTANT:This unit is shippedwithoutgasolineor oil in the engine. Be certain to serviceenginewithgasolineand oil as instructedin the Operationsectionbeforestartingor runningyourmachine. f NOTE:Referenceto rightand left hand sideof the LawnMoweris observedfrom the operatingposition. OPENING CARTON 1. Cut eachcornerof the cartonverticallyfromtop to bottom. 2. 3. Removeall looseparts. Removeloosepackingmaterial. REMOVING UNIT FROM CARTON 1. Lift unit from the rearto detach it from underlyingcarton material and roll unit out of carton. 2. Checkcarton thoroughlyfor anyotherlooseparts. J LOOSE Figure1 PARTS IN CARTON • GrassCatcher • • • GrassCatcherAdapter Side DischargeChute EngineOil f ASSEMBLY Attaching 1. Removeany packingmaterialwhich may be betweenupperand lowerhandles. A. B. 2. The Handle Pull up and back on upperhandleas shownin Figure1. Makecertainthe lowerhandle is seatedsecurelyintothe handlemountingbrackets.Do notcrimp cableswhile lifting the handleup. Tightenstar knobsto secureupper handleto lowerhandle. Makesurethat each carriagebolt is seatedproperlyin the handle. _jf fJ tj Locatethe hairpinclip on the weldpin on eachsideof lower handle. A. Removehairpinclipfrom this hole. Usinga pairof pliers, insert hairpinclip intothe hole on pin closestto thebracket. See Figure2. Repeaton otherside. B. Inserta carriagebolt fromthe manualbag intothe upper hole on the handlemountingbracket.Securewith one plastic wingnut, also includedin themanualbag.Repeaton other sidewith remaininghardware. NOTE:Makecertainthe drivecable is routedaroundthe outsideand abovethe lowerhandleso it does not interferewith attachingthe grass bag.The chutedoor has beendesignedto movethe starterrope out of theway of the bag whenthe chutedoor is opened. 10 Figure2 3. The ropeguide,which is connectedto the support rod,is located on the rightsideof the lowerhandle.See Figure3 below. A. Holdblade controlagainstupperhandle. B. C. D. Pull starterropeout of the engine.Releasebladecontrol. Slip starterrope intorope guide. Use cableties to securecableto lowerhandle. Attaching the Grass Catcher Themowerwas shippedwith the mulchingbaffleinstalledon the unit. For baggingpurposes,youwill haveto attachthe grassbag and its adapterin placeof the mulchingbaffle. 1. Removethreewingnuts holdingthe mulchingbaffle in placeand removefrom unit. See Figure4. 2. 3. Replacewithgrass bag adapter,whilemakingsurethe front lip of adaptergoes undertheedge of the deck.Securewith wingnuts previouslyremoved. Lift chute door on the grass bagadapterand slidegrass bagonto the adapter.See Figure5. Figure3 f .J Figure4 Figure5 11 f Attaching Side Discharge Followstepsbelowto installthe sidedischargecover: 1. 2. -'% Cover ..... '.... Removemulchingbaffleor grass bag adapterfrom unitby disconnectingwingnuts. Attachsidedischargecover to unitand securewith the threewing nuts.See Figure6. ADJUSTMENTS Cutting Height Thecuttingheightadjustmentleverislocatedabovethe rearIdt wheel.See Figure7Ainsert. 1. 2. 3. Pull leveroutand awayfrom mower. Moveleverforwardor backfor desiredcuttingheight. Releaselevertowardsmowerdeck. Thefront wheelcuttingheightisdeterminedby selectingone of six positionson eachcasterassembly.To adjustfront cuttingheight,refer to Figure7B and proceedas follows: 1. Removewing nut fromaxle bolt. Slideaxle bolt and wavewasher fromthe assemblyand selecta cuttingheight. 2. Withwave washeron axle bolt, reinserthardwarein the square hole desiredthroughwheel assemblyand securewith wing nut previouslyremoved. Figure6 f IMPORTANT:All wheels mustbe placedin the samerelativeposition. For roughor unevenlawns,movethe heightadjustmentleverto a higherposition.This will stop scalpingof grass. Thecasterscan be locked in a straightaheadpositionor positionto swivelfreely.See Figure70 insert. 1. Lift lock pins. 2. Placein larger holesto lock wheels.Placepins in smallerholesto allowcastersto rotatefreelyfor turning. Drive Control Theadjustmentwheelis locatedin the drivecontrol handlehousing and is usedto tightenor loosenthe drivebelt.You will haveto adjust thedrive controlif any of the followinghappens: 1. The mowerdoes notpropelitself with thedrive controlengaged. 2. The mower'sdrivewheelshesitatewith the drivecontrolengaged. If either of theseconditionsoccur,rotatetheadjustmentwheel clockwiseto tightenand counter-clockwiseto loosencableto adjust thedrive control.See Figure8. NOTE:Forsome peoplethe drivecontrolmay not be in a comfortable position.Youcan adjustthe handleby tighteningthe adjustmentwheel. \\ Figure8 12 Control Drive Control__ Start Ignition Key Shift Lever Cutting Height Adjustment Lever Recoil Starter Gas Cap / 0il Cap/ Side Discharge Cover J Figure9 BLADE CONTROL ELECTRIC Theblade controlis attachedto the upper handleof the mower.See Figure9. Depressand squeezeit againstthe upperhandleto operate the unit. Releaseit to stopengineand blade. HEIGHT SIDE DISCHARGE COVER Your moweris shippedas a mulcher.Todischargethegrass clippings to the side instead,followthe instructionsin the Assemblysectionto attachthe sidedischargecover. ADJUSTMENT Keep handsand feet awayfrom the chutearea on cuttingdeck. Refer to warninglabel on the unit. Thecuttingheightadjustmentleveris locatedabovethe left rearwheel.Toadjust thecutting height,referto the Assemblysection. RECOIL STARTER The recoilstarteris connectedto the supportrod and is locatedon the rightsideof the lowerhandle.Standbehindthe unit and pull the recoil starterrope to start the unit. DRIVE CONTROL GAS CAP Thedrivecontrol is locatedon the upper handle.Squeezethe drive controlto engagethe drivesystem.Releaseit to disengagethedrive system. SHIFT KEY The electricstartignitionkey is locatedon the left sideof the handle panel.It is usedonly forthe electricstarter. This bladecontrolis a safetydevice.Neverattemptto bypassits operations. CUTTING LEVER START IGNITION Removethe gascap to add fuel to the fueltank. Useclean, fresh, regularunleadedgasolinewith a minimumof 87 octane. OIL CAP/DIPSTICK LEVER Referto the Maintenancesectionfor instructionson checkingthe oil. Theshift leveris locatedon the drivecontrol housingon the upper handle.This leveris usedto selectthe forwardspeedof the mower. Whenchangingspeedselection,releasethe drivecontrol. TRAIL SHIELD The trail shieldis attachedto the rear of the mowerand isthere to protectthe operatorfrom flying debris.Do not usethe mowerunless the shieldis fully functionaland in place. IMPORTANT:Movethe shift leveronlywhenthe engineis running. Changingthe shift leversettingwith theengineoff can damagethe mower. 13 GAS AND OiL FILL-UP f "_ IMPORTANT:This unit isshippedwithoutgasolineor oil inthe engine. Be certain to serviceenginewithgasolineand oil as instructed inthis sectionbeforestartingor runningyourmachine. Oil (one 18 ounce bottle shipped with unit) FirstTime Use 1. 2. Removeoil fill dipstick (G). See Figure10. Withthe moweron levelground,emptyentirecontentsof oil bottle providedintothe engineoil fill (H). 3. Replaceoil fill dipstickand tighten. Subsequent Uses Use 4-strokemotoroil that meetsor exceedsthe requirementsfor API servicecategorySF,SG,SH, SJ or later.Alwayscheckthe APIservice label on the oil containerto be sureitincludesthe lettersSF,SG,SH, SJ or later. Outdoortemperaturesdeterminethe properoil viscosityfor the engine. Use thechart to selectthe best viscosityfor the outdoortemperature rangeexpected. f 30 ¸ " 2 e Gasolineis highlyflammableand explosive,and youcan be burnedor seriouslyinjuredwhenrefueling.Stopengineand keep heat, sparks,and flameaway.Refuelonly outdoors.Wipe up spills immediately. 10 14 o4 If yourequipmentwill be usedon an infrequentor intermittentbasis, pleasereferto the Off SeasonStoragesectionfor additionalinformation regardingfuel deterioration. °30 NOTE:Fuelcandamagepaintand sometypesof plastic.Be careful notto spill fuelwhenfilling yourfueltank. * Below40°F(4°C)the use of SAE30 will resultin hard starting. ** Above80°F(27°C)the use of 10W-30maycause increasedoil consumption.Checkoil levelmorefrequently. 1. Checkthe oil with the enginestoppedand level. 2. Removethe oil fill dipstickand wipeit clean. 4. Insertand tightenthe oil fill dipstick.Removeit to checkthe oil level.See Figure10. If the oil levelis near or belowthe lowerlimit mark on the dipstick, removethe oil fill dipstick,and fill with the recommendedoil to the upper limitmark (J). Do notoverfill. 5. Reinstallthe oil fill dipstick. Gasoline Neverusestale or contaminatedgasolineor oil/gasolinemixture. Avoidgettingdirt or waterin the fueltank. 1. Removethe fuel tank cap. 2. Fillthe fuel tankwith fuel. To allowforexpansionof the fuel, do notfill abovethe bottomof the fuel tank neck.Do notoverfill. Wipe up spilledfuel beforestartingtheengine. 3. 4. Installthe fuel tank capand tighten it until it clicks. Movelawnmowerat least 10feet awayfromthe fuel container/ sourceand site beforestartingthe engine. Be sureno one otherthan theoperatoris standingnearthe lawn mowerwhilestartingengineor operatingmower.Neverrun engine indoorsor in enclosed,poorlyventilatedareas. Engineexhaust containscarbonmonoxide,an odorlessand deadlygas. Keep hands, feet, hairand looseclothingawayfrom any movingpartson engine and lawn mower. Do notuse unapprovedgasolines,such as E85.Do not mixoil in I gasolineor modifyengineto run on alternatefuels.This will damage _theenginecomponentsand void the engine warranty. Fuelmustmeet these requirements: • Clean,fresh,unleadedgasoline. A minimumof 87 octane/87AKI (91 RON). Gasolinewith up to 10%ethanol(gasohol)or up to 15%MTBE (methyltertiarybutyl ether)is acceptable. 20 32 3. • • Refuelina well-ventilatedarea with the enginestopped.If the engine hasbeen running,allowitto cool first. Neverrefuelthe engineinsidea buildingwheregasolinefumesmay reachflamesor sparks. 40 16so4s6 o** Figure10 14 TO START ENGINE 1. 2. Standingbehindthe mower,squeezethe bladecontrolhandle againstupperhandle.See Figure11. This mowerhastwo separatestartingsystems,electricand recoil. Electric Start: Turnignitionkeyto the rightto startthe engine. Releasethe key after theengine starts. Recoil Start: Graspstarterhandleand pull ropeout slowly untilengine reachesstart of compressioncycle(rope will pull slightlyharderat this point). Letthe rope rewindslowly.Pull rope with a rapid,continuous,full arm stroke.Keepinga firm grip on the starterhandle,let the rope rewindslowly. Rapidretractionof startercord (kickback)will pull handand arm towardengine fasterthan youcan let go. Brokenbones,fractures, bruisesor sprainscould result. NOTE:If engine floods,wait a few minutesto restart. TO STOP ENGINE 1. Releasebladecontrolto stop the engineand blade. USING AS MULCHER Waitfor the bladeto stopcompletelybeforeperforminganywork on the moweror to removethe grass catcher. USING YOUR Formulchinggrass,removethe grass catcheror the sidedischarge chute fromthe mower,and reattachthe mulchingbaffle.Fordfective mulching,do notcut wet grass.If the grass hasbeen allowedto grow in excessof fourinches,mulchingis not recommended.Use thegrass catcherto bag clippingsinstead. LAWN MOWER Be sure lawnis clearof stones,sticks,wire, or otherobjectswhich coulddamagelawnmoweror engine.Suchobjectscouldbe accidently USING GRASS CATCHER thrownby themowerin anydirectionand cause seriouspersonalinjury You canuse the grasscatcherto collectclippingswhileyou are to the operatorand others. operatingthe mower. 1. Theoperationof any lawnmowercan result in foreignobjectsbeing thrownintothe eyes,whichcan damageyoureyes severely.Always wearsafetyglasseswhileoperatingthe mower,or whileperforming anyadjustmentsor repairson it. 1. 2. 2. 3. 4. Oncethe engineis running,squeezethe drivecontrol againstthe upperhandleto propelmower.Releaseit to disengagethe drive. Use the shiftleverto selectthe forwardspeedof the mower- 1 is the slowestspeed,6 is thefastest.Whenchangingspeed selection,releasethedrivecontrol. 5. IMPORTANT:Movethe shift leveronlywhenthe engineis running. Changingthe shift leversettingwith theengineoff can damagethe mower. Attachgrass catcherfollowinginstructionsin the Assembly section.Grass clippingswill automaticallycollect in the bag as you run the mower. Operatethe mowertill the grass bag is full. Stopenginecompletelyby releasingthe bladecontrol.Makesure that the unit hascome to a completestop. Whileholdingthe grass bag by boththe rear handleand the lower handle,lift the grass bag straightup off the adapter.Thechute door will movethe rope outof the way of the bag. Continuingto hold the lowerhandle,raisethe rearof the grass bagand releasethe lowerhandleovera properreceptacle.The grass bag willopen and the grass clippingswill disperse.When replacingthe grass bag,be surethetop of the bag restson the wire supportbetweenthe handles. If you strikea foreignobject,stop theengine.Removewire fromthe spark plug,thoroughlyinspectmowerfor anydamage,and repair damagebeforerestartingand operating.Extensivevibrationof mower duringoperationis an indicationof damage.Theunit shouldbe promptlyinspectedand repaired. 15 MAINTENANCE SCHEDULE Followthe maintenanceschedulegivenbelow.This chart describes serviceguidelinesonly. Usethe ServiceLog columnto keeptrackof completedmaintenancetasks.To locate the nearest Sears Service Centeror to scheduleservice,simplycontactSears at 1-800-4-MY-HOME®. Beforeperforminganytypeofmaintenance/service, disengageall controlsand stoptheengine.Waituntilall movingpartshavecometo a completestop.Disconnectsparkplugwireandgrounditagainstthe enginetopreventunintendedstarting. EachUse 1. Check Unit and engine. 2. 3. Tightenor replace Clean 1. Engineoil 1. Change 1. Airfilter& Pre-Oleaner(IfEquipped)t 1. Clean 2. 3. Controllinkages/pivotsand wheels Undersideof mowerdeck 2. 3. Lubewith lightoil Clean 4. EngineOil 4. Change Annuallyor 200 hours 1. Airfilter& Pre-Oleanert 1. Change Annually 1. Sparkplug 1. Replace BeforeStorage 1. Fuelsystem 1. 1st5 hours Annuallyor 50 hours 1. 2. Engineoil level Looseor missinghardware 3. Runengine untilit stopsfrom lackof fuel, or add stabilizerto a full tank of fresh fuel priorto storage. Cleanmoreoften under dustyconditionsor whenairbornedebrisis present. 16 f Alwaysstop engine,disconnectspark plugwire, and groundagainst enginebeforeperformingany type of maintenanceon yourmachine. Electrode GENERAL • • Alwaysobservesafetyruleswhenperformingany maintenance. Thewarrantyon this lawnmowerdoesnot coveritemsthat have been subjectedto operatorabuseor negligence.To receivefull valuefromwarranty,operatormustmaintainthe equipmentas instructedhere. • • Changingof engine-governedspeedwill voidenginewarranty. All adjustmentsshouldbe checkedat leastonceeach season. • Periodicallycheckall fastenersand make suretheseare tight. ENGINE MAINTENANCE Spark Plug Forgood performance,the spark plug mustbe properlygappedand freeof deposits.Replacethe spark plug annually. 1. 2. Porcelain RECOMMENDATIONS Figure12 Disconnectthe cap fromthe spark plug,and removeanydirt from the sparkplug area. Use the propersize sparkplug wrenchto removethe spark plug. Fastener NOTE: Replacewith a Champion®RC12YCsparkplug. Cover 3. 4. Checkthegap with a wire gauge.See Figure12.Sparkplug gap shouldbe 0.020in (0.51ram). If necessary,resetthe gap. install and tightenthe sparkplug to the recommendedtorque(180 Ib-in[20 Nm]). 5. Attachthe sparkplug capto thespark plug. Air Cleaner A dirty air cleanerwill restrictair flow to the carburetorand causepoor engineperformance,inspectthe filter eachtime theengine is operated.You will needto cleanthe filter morefrequentlyif youoperatethe enginein verydusty areas. Cleantheair cleanerevery 50 hoursof operationor once a season. Replacetheair cleanerannually. Air Filter Neverstartor run the enginewith the air cleanerassemblyor theair filter removed. Figure13 4. NOTE:Do notuse pressurizedair or solventsto cleanthe filter.Pressurizedair can damagethefilter and solventswill dissolvethefilter. 5. 1. Removethefastenerand air cleanercover.See Figure13. 6. 2. 3. Removethepre-cleaner(if equipped)and filter. Toloosendebris,gentlytap the filter on a hard surface,if filter is excessivelydirty, replacewith a newfilter. 7. 17 Washthe pre-cleanerin liquiddetergentand waterand allowit to thoroughlyair dry. Do not oil the pre-cleaner. Assemblethe dry pre-cleanerto the filter. installthe filter and pre-cleanerinto the base.Makesurefilter fits securelyin the base. installair filtercoverand securewith fastener.Makesurethe fasteneris tight. Check Engine Oil Checkoil levelbeforeeachoperation.Be sureoil levelis maintained. 1. 2. Checkthe oil with the enginestoppedand level. Removethe oil fill dipstickand wipeit clean. 3. 4. Insertand tightendipstick.Removeitto checkthe oil level. If the oil levelisnear or belowthe lowerlimit mark on the dipstick, removethe oil fillercap/dipstick,and fill with the recommendedoil to the upperlimit mark.Do not overfill. Reinstallthe oil fill dipstick. 5. Change Engine Oil Gasolineand its vaporsare extremelyflammableand explosive. Fireor explosioncancause severeburnsor death. Mumer Changeengineoil after thefirst five hoursof operation,and everyfifty hoursor once a seasonthereafter. Figure14 you top tube, emptyor fuel canleak a fire orthe explosion.Toempty lWhen drainthe oil outand from theresultin oil fill fuel tank mustbe the fuel tank, runthe engine untilitstopsfrom lack of fuel. 1. 2. 3. Withengine off butstill warm,disconnectthe spark plugwireand keepit awayfrom the sparkplug. Placea suitablecontainernextto the engineto catchthe usedoil. Removethe oil fill dipstickand drain theoil intothecontainerby tippingtheenginetowardthe oil fillerneck.See Figure14. Used oil isa hazardouswasteproduct.Disposeof usedoil properly. IDo not discardwith householdwaste.Checkwith yourlocalauthori_tiesor SearsServiceCenterfor safedisposal/recyclingfacilities. 4. Withthe engine in a levelposition,fill to the upper limit markon thedipstick with the recommendedoil. Figure15 Runningthe enginewith a lowoil levelcan causeenginedamage. 5. LUBRICATION Blade Control Reinstallthe oil fill dipsticksecurely. Lubricatepivotpoints on the bladecontrolat leastoncea seasonwith light oil.This control mustoperatefreely inbothdirections.See Figure 15. Clean Engine • Dailyor beforeevery use, cleangrass,chaffor accumulated debrisfromengine.Keeplinkage,spring,and controlsclean. Keeparea aroundand behindmufflerfreeof any combustible debris. • Keepingenginecleanallows air movementaroundengine. • Engineparts shouldbe keptcleanto reducethe risk of overheatingand ignitionof accumulateddebris. Wheels and Casters Lubricatethe wheelsand castersat leastonce a seasonwith light oil (or motoroil). If wheelsare removedfor any reason,lubricatetheaxle bolt and innersurfaceof the wheelwith lightoil. See Figure15. Grass Catcher Adapter Lubricatethe torsion springand pivotpointon eachend of the grass catcheradapterdoor at leastonce a seasonwith lightoil to prevent rust.See Figure15. Transmission Do not usewaterto cleanengine parts.Watercouldcontaminatefuel system.Usea brushor dry cloth. The transmissionis pre-lubricatedand sealedat thefactory and does not requirelubrication. 18 CLEANING DECK Cleanundersideof the mowerdeck once a seasonto preventbuild-up of grass clippingsor otherdebris. Followstepsbelowfor thisjob. 1. Disconnectsparkplug wire. Draingasolinefromlawn moweror placea pieceof plasticunder thegas cap. 2. Tip mowersothat it restson the housing,keepingthe mufflerside down. Referto Figure14.Holdmowerfirmly. Nevertip the mowermorethan 900in any directionand do not leave the mowertippedfor any lengthof time. Oil candrain into the upper partof the enginecausinga startingproblem. 3. Scrapeand cleanthe undersideof thedeck with a suitabletool. Donot spraywith water. IMPORTANT:Donot usea pressurewasheror gardenhoseto clean yourunit. These maycausedamageto bearings,or the engine.The useof waterwill resultin shortenedlife and reduceserviceability. 4. Figure16 Putthe mowerback on its wheelson the ground.If you had put plasticunderthe gas capearlier,makesureto removeit now. REPLACING REAR FLAP To replacerearflap, proceedas follows: 1. To removerearflap, lift reardoor,removescrew,and pressflap in on either sideto removefrom hole.See Figure16. 2. Removescrewand flapfrom oppositehole and replacewith new flap in the oppositeorderand mannerof removal. ADJUSTING SHIFT LEVER CABLE Periodicadjustmentof the six speedshift cablemay be necessarydue to normalwearon the cable.Adjustmentis neededif all six speedsdo not work.Theadjustablecable bracketis locatedon the left sideof the mowerbesidetheengine.See Figure17. 1. Start engineand place shiftleverin the sixthspeedposition. 2. 3. 4. 5. Stopengineand disconnectsparkplug wireand ground it against engine. Loosenhexnutwhich securesthe adjustablecablebracket.See Figure17. Pushback on the adjustablecable bracket. Tightenhexnut. J Figure17 19 BLADE CARE Periodicallyinspectthe bladeadapterfor cracks,especiallyif you strikea foreignobject.Replacewhen necessary.Followthe steps belowfor bladeservice. Whenremovingthecuttingblade for sharpeningor replacement, protectyourhandswith a pair of heavyglovesor usea heavyrag to hold the blade. 1. 2. 3. 4. Disconnectspark plug bootfrom spark plug.Turnmoweron its side makingsurethatthe air filterand the carburetorare facing up. Removethe boltand the bladebell supportwhichhold the blade and the bladeadapterto the enginecrankshaft.See Figure18. Removebladeand adapterfrom the crankshaft. Removebladefrom the adapterfor testingbalance.Balancethe bladeon a roundshaftscrewdriverto check. Removemetalfrom oft the heavyside untilit balancesevenly.When sharpeningthe blade,follow theoriginalangle of grind.Grind eachcuttingedge equallyto keepthe blade balanced. Figure18 An unbalancedblade willcause excessivevibrationwhen rotatingat high speeds.It maycause damageto mowerand couldbreakcausin( personalinjury. 5. Lubricatethe enginecrankshaftand the innersurfaceof the blade adapterwith lightoil. Slidethe bladeadapteronto the engine crankshaft.Placethe bladeon the adaptersuch that the sideof the blademarked"Bottom"(or with partnumber)facesthe ground whenthe moweris in the operatingposition.Make surethat the blade isaligned and seatedon the bladeadapterflanges. 6. Placebladebell supporton the blade.Align notcheson the blade bell supportwith small holesin blade. Replacehexbolt and tightenhexbolt to torque:450 in. Ibs.rain., 600 in. Ibs.max. 7. J Figure19 Toensuresafeoperationof yourmower,periodicallycheckthe blade boltfor correcttorque. BELT CARE + Positive NOTE:Severalcomponentsmust be removedin orderto changethe mower'sself-propulsiondrivebelt. See an authorizedSearsService Centerto haveyourbelt replaced. REPLACING ,- Terminal Negative ._rrninal BATTERY Batteriescontainsulfuricacid whichmay causeburns. Donot short I circuitor mutilatebatteriesin anyway.Do not putbatteriesin fireas lthese may burst or releasetoxic materials. 1. Loosenstar knobs securingupper and lowerhandlesand carefullyfoldthe upper handledowntowardthelowerhandleas shownin Figure19. 2. Removethe two screwssecuringbatterycoverto batteryhousing and placethem to the side.See Figure19. 20 J Figure20 Open battery cover, remove positive andnegative leads from battery, remove andreplace withnewbattery. Connect the positive leadtothepositive sideofthebattery pack, thenconnect thenegative side. NOTE: Thebattery youhave maydifferslightly fromtheoneshown in Figure 19.Refer totheParts List. IMPORTANT: When replacing battery pack inhandle panel, battery packmust bepositioned withthepositive terminal totheleftside andthenegative terminal totherightsideofpanel (Positive terminal isclosest tothekeyswitch). SeeFigure 20.Replacing battery pack incorrectly willcause serious damage. 4. Reattach battery cover tobattery housing bysecuring withthe twoscrews removed earlier, making suretosnapthewireconduit ontheleftintoplace onthehousing. 5. Foldhandles back upandtighten starknobs. Figure 21 Donotremove thebattery packfromtheelectric starter housing for anyreason otherthanreplacement. Charging Battery Thebattery contains corrosive fluidandtoxicmaterial; handle with careandkeep away fromchildren. Donotpuncture, disassemble, mutilate orincinerate thebattery. Explosive gases could bevented during charging ordischarging. Useinawellventilated area, away fromsources ofignition. NOTE: Thespecial designed plugonthecharger willonlyfitintothe plugonthebattery box. 1. Plug thebattery charger intotheportontheunderside ofthe battery housing. SeeFigure 21. 2. Insert thebattery charger plugintoastandard 120volthousehold outlet. Charge battery for8to10hours before initial use.Failure todosomayresult indiminished battery life.Donot charge longerthan 12hours.Thebattery should onlyneed tobe charged uponinitial setup andafteranyother extended periods of non-use. 3. Aftercharging, disconnect charger plugfromoutlet first,then disconnect charger leadfrombattery. J Figure 22 Replacing Fuse The electricstartercircuitand batteryare protectedby a 40 ampere IMPORTANT: Always plugcharger leadintobattery pack leadfirst, fuse. If the fuse burnsout, theelectricstarterwill not operate.If the andtheninsert battery charger pluginto120voltstandard household unitfails to start with theelectricstarter,performthefollowingstepsto outlet. Follow thisorder ofaction every timeyoucharge thebattery. checkthe fuse insidethe batteryhousing: 1. Openthe batterycover as describedin ReplacingBattery.See Figure19. Useonlythebattery charger supplied withthismower. 2. 3. Removefuse from socketand inspectas shownin Figure22. If it is burnedout, replacewith standardautomotive40 amperefuse. Carefullyplacewiringback intohousing,closebatterycover,and fold upperhandle backinto place. NOTE:The enginecan be startedmanuallyif the fuse burnsout. 21 Neverstorelawnmowerwith fuel in tank indoorsor in poorly ventilatedareaswherefuel fumesmay reachan openflame,spark, or pilot lightas on a furnace,water heater,clothesdryer,or gas appliance. PREPARING THE ENGINE PREPARING THE LAWN MOWER Forenginesstoredover30 days: 1. Topreventgum from formingin fuel systemor on carburetor parts,run engine untilit stopsfrom lack of fuel or add a gasoline additiveto thegas in thetank. If youuse a gas additive,run the enginefor severalminutesto circulatethe additivethroughthe carburetor--afterwhichthe engineand fuel canbe storedup to 24 months. • Cleanand lubricatemowerthoroughlyas describedin the lubrication instructions. • Donot usea pressurewasheror gardenhoseto cleanyour unit. • Coat mower'scuttingbladewith chassisgreaseto prevent rusting. Referto PREPARINGTHE ENGINEfor correctengine storage instructions. 2. 3. • • Whileengineis still warm,changethe oil. Cleanengineof surfacedebris. Store mowerin a dry,cleanarea. Do notstore next tocorrosive materials,suchas fertilizer. Whenstoringany type of powerequipmentin a poorlyventilatedor metal storageshed,care shouldbe taken to rust-prooftheequipment. Usinga lightoil or silicone,coat the equipment,especiallycablesand all movingpartsof yourlawnmowerbeforestorage. Battery The batterymustbe storedwith a full charge.Extendedstorageof a dischargedbatterywill reducelifeand capacityof the battery. 22 Beforeperforminganytypeof maintenance/service, disengageall controlsandstoptheengine.Waituntilall movingpartshavecometo a completestop.Disconnectsparkplugwireand groundit againstthe engineto preventunintendedstarting.Alwayswearsafetyglassesduring operationor whileperforminganyadjustmentsor repairs. Enginefails to start 1. 2. Bladecontroldisengaged. Sparkplug bootdisconnected. 1. 2. Engageblade control. Connectwireto spark boot. 3. 4. 5. Fueltank emptyor stale fuel. Faultyspark plug. Engineflooded. 3. 4. 5. Filltank with clean, freshgasoline. Clean,adjustgap,or replace. Waitafew minutesto restart. 6. Blockedfuel line. 6. Contactyour SearsParts& RepairCenterto have fuelline cleaned. 7. Burntfuse.(ElectricStart only) 7. Replacefuse (see ServiceSection). 1. Sparkplug bootloose. 1. Connectand tightenspark plug boot. 2. 3. 4. Stalefuel. Ventin gas cap plugged. Wateror dirt in fuel system. 2. 3. 4. Filltank with clean, freshgasoline. Clearvent. Runengineuntil it stopsfrom lack of fuel. Refillwith freshfuel. 5. 6. Dirtyair cleaner. Blockedfuel line. 5. 6. Referto Air Cleanerin EngineMaintenancesection. Contactyour SearsParts& RepairCenterto have fuelline cleaned. 1. Engineoil levellow. 1. Fillcrankcasewith properoil. 2. Air flow restricted. 2. Cleanarea aroundand on topof engine. Occasionalskips(hesitates) 1. Sparkpluggap too close. 1. Adjustgap to .020". Idlespoorly 1. 2. Sparkplugfouled,faulty,or gap too wide. Dirtyair cleaner. 1. 7. Resetgap to .020"or replacesparkplug. Referto Air Cleanerin EngineMaintenancesection. Excessivevibration 1. Cuttingbladelooseor unbalanced. 1. Tightenbladeand adapter.Balanceblade. 2. Bentcuttingblade. 2. Replaceblade. 1. Wetgrass. 1. Do notmow whengrassis wet;wait until laterto cut. 2. Excessivelyhigh grass. 2. 3. Dullblade. 3. Mowonce at a highcuttingheight,then mowagain at desiredheightor makea narrowercuttingpath. Sharpenor replaceblade. Unevencut 1. Dullblade. 1. Sharpenor replaceblade. Mowerwill not self propel 1. Beltnot installedproperly. 1. Checkbeltfor properpulleyinstallationand movement. 2. Debriscloggingdriveoperation. 2. Stopengine,disconnectspark plug boot, and cleanout debris. 3. Damagedor worn belt. 3. Contactyour SearsServiceCenter. Enginerunserratic Engineoverheats Mowerwill not mulchgrass NEED MORE HELP? :: i o Find this and all y .... ther product ...... Is online, oGet ....... f....... t..... fh...... perts. oGet _p...... ,zeal m_int ...... phnforyour h...... ° Find information and tools to help with home 23 projects. Self Propelled Mower B Model No. 247.887760 12" 15 21 20 44 "43 24 Self Propelled Mower B Model No. 247.887760 I = O m O D = O 1 647-0004 BladeControl 38 2 753-0717 UpperControlHousing 39 964-04093A 3 731-0620A DriveControl 4O 747-0940A-0637 SupportRodw/Rope Guide 4 753-0717 LowerControlHousing 41 747-0939 Pivot Rod 5 710-1667A C SunkTapScrew,#10 x.75 Lg 42 747-0937-0637 GrassCatcherFrame 6 753-0717 CableMountingCap 43 631-0071 GrassCatcherCover 7 746-0711B DriveCable 44 926-0106 CapNut 8 728-0199 Rivet 45 712-04063 FlangeLockNut,5/16-18 9 925-04347 Key Switch 46 731-1874A ChuteDoor 10 925-0201 Key 47 732-0819 TorsionSpring 11 746-04639 ControlCable 48 726-0111 PushCap 12 749-04354A-0637 UpperHandle 49 747-0965 Pivot Rod 13 720-04072A Star Knob 5O 925-04323 12VBattery 14 710-1652 Screw,1/4-20x .625 51 710-0654A SeresScrew,3/8-16x 1.00 15 710-1174 CarriageBolt,5/16-18x 2.0 52 925-04072 HarnessAssembly CableTie 53 936-0526 WaveWasher,1.38ID x.88 OD 950-1070 SIveSpacer,.88ID x 1.00OD 16 926-0240 710-0895 Screw,1/4-15x .750 GrassCatcher 17 749-0907B LowerHandle 54 18 931-0066 AdapterAssembly 55 782-7596A ControlArm 19 731-1832 Side DischargeChute 56 932-0807 TorsionSpring 2O 931-1833A Mulch Cover 57 711-1114 PivotShaft 21 782-0078B-4028 Deck21" 58 782-7597 PivotBracket 22 912-0397 Wing Nut 59 738-0924A ShlderScrew,.375ID x 1/4-14 23 710-0703 CarriageBolt, 1/4-20x .75" 60 756-0625 CableRoller 24 914-0104 CotterPin 61 710-0134 CarriageScrew,1/4-20x .62 25 726-0233 PushNut, .25x ID x .50 OD 62 936-0329 LockWasher,1/4 26 950-1071 SleeveSpacer,.881Dx 1.130D 63 782-7575B-0637 CableMountingBracket 27 756-0612A Half Pulley:2.62OD 64 746-0939A 28 756-0613 Half Pulley:2.62OD x 1.61 65 782-7574A-0637 CableAdjustmentBracket 29 741-0545 Ball Bearing 66 712-04064 Hex Nut 1/4-20 30 682-7527 Cup 67 912-0138 Hex Nut 1/4-28 31 748-0377E Blade Adapter 68 732-0627A Shift LeverSpring Blade Bell Support 69 731-0924 6 SpeedShift Lever 913-0397 Gear Insert 32 736-0524B 6 SpeedCable 33 710-1257 Hex Bolt, 3/8-24x 2.5 70 34 742-0741A 21"MulchingBlade 71 16864 6 Spd.RackCableBracket 35 710-0653 Screw,1/4-20x 3.75 72 956-0613A PulleyAssembly 36 731-1828 Baffle 73 725-04329 12VBatteryCharger 37 954-0460 Belt, 3/8 x 39.24 25 Self Propelled Mower B Model No. 247.887760 49 12 57 58 2G Self Propelled Mower B Model m No. 247.887760 D = " O O 1 914-0474 CotterPin 29 682-7528-0637 ChainCoverAssembly 2 710-1652 Screw1/4-14x .825 3O 741-0324A FlgeBearing.506 ID x .590Lg 3 936-0264 FlatWasher.330ID x.630 OD 31 682-7526-0637 TransmissionAxleAssembly 4 914-0104 CotterPin 32 918-0263A TransmissionAss'yComplete 5 932-0306A CompressionSpring 33 734-1857 Wheel7 x 2 913-0453 Chain 6 734-2010A Wheel,9 x 2.125 34 7 912-0414 Top LockTabWeldNut 1/4-20 35 638-0012 RearAxle Assembly 941-0522 FIgeBearing.506 ID x .715Lg 8 16855 RatchetPawlPlate 36 9 10622B PlasticSpring Ratchet 37 782-0568-0637 HeightAdjustmentSpring Brkt. 10 748-0381 PawlRH 38 950-0151 Spacer.550ID x .750OD 948-0188B PawlLH 39 710-1315 Screw3/8-16x .25 11 938-0137A ShlderScrew.340ID x.285 OD 4O 911-0835 ClevisPin .50 Diax 4.82 Lg. 12 948-0318 Wheel Ratchet 41 750-0807 Spacer.385ID x .624OD 13 736-0270 BellWasher.265ID x.75 OD 42 732-0832 TorsionSpring 14 710-0751 HexCap Screw 1/4-20x.620 43 710-0779A Screw,AB, #10-16x .500 15 937-3000 GreaseFitting 44 731-06874 TrailShield 16 736-0931 FlatWasher.203ID x.403 OD 45 687-02495 HandleBracketAssembly- LH 17 747-0924 Wheel Pin Lock 46 687-02494 HandleBracketAssembly- RH 18 682-9020A-0691 CasterAssemblyRH 47 725-0157 CableTie 682-9021A-0691 CasterAssemblyLH 48 710-1348 Screw 1/4-14x.500 682-9024-0691 CasterBracketAssemblyRH 49 710-0260A CarriageBolt5/16-18x.62 682-9026-0691 CasterBracketAssemblyLH 50 911-1146 CasterAxle 720-0223 Grip 51 912-0397 Wing Nut 712-04063 FlangeLock Nut5/16-18 19 20 21 732-0803A SpringLever 52 22 938-0529 ShoulderNut.825x .165Lg. 53 726-0214 PushCap 23 936-0369 FlatWasher.508 ID x 1.00D 54 936-0232 WaveWasher.531ID x.781OD 24 782-0566B-0637 PivotArmAssembly 55 736-0366 FlatWasher.640ID x 1.12OD 25 750-0515 Spacer.510ID x .70OD 56 741-0685 FlangeBearing 26 741-0978 SIv Bearing.504 ID x .830OD 57 731-07001 Hubcap- RadialSpoke 27 950-1056 ShlderSpacer,.3851Dx .715Lg 58 731-1887 Hubcap- Spokew/Hole 28 710-0653 TapScrew 1/4-20x .375 59 710-0604A Screw,5/16-18x .625 27 Craftsman Engine Model No. 12S905-0732=B1 For Craftsman Mower Model No. 247.887760 1319 WARNING LABEL 58 592 ,rq-_ ReadandfollowOperating Instructions before running engine.] ,_ Gaso nes8ammabe AJowengneto ' cool atleast 2 minutes before refueling. Engines emit carbon monoxide, I DONOTruninenclosed area. =_ Muffler areatemperature mayexceed _ 150°F.Beno ouch he pais. ) k_ REQUIRED when replacing with warning labels affixed. 1058 304 OPERATOR'S 1036 EMISSIONS Y l l 662A 842 524 601 I 1059 I i670 ' parts MANUAL LABEL Craftsman Engine Model No. 12S905=0732=B1 For Craftsman Mower Model No. 247.887760 968 445 51 j 209 623 163 1395 29 Craftsman Engine Model No. 12S905=0732=B1 356 For Craftsman Mower 662i Model 745_ 334 / 333 / 309 . 337 635 30 922 No. 247.887760 621 Craftsman Engine Model No. 12S905-0732-B1 For Craftsman Mower Model 332@ 7_ 37 1376 202 _1264 1263 31 No. 247.887760 Craftsman Engine Model No. 12S905=0732=B1 For Craftsman Mower 306 32 Model No. 247.887760 Craftsman Engine Model No. 12S905=0732=B1 For Craftsman 33 Mower Model No. 247.887760 Craftsman Engine Model No. 12S905-0732-B1 For Craftsman Y 2o_ 616 404 615 718 0 Mower j + I I 34 Model No. 247.887760 Craftsman Engine Model No. 12S905=0732=B1 For Craftsman Mower Model 741 J 718 / '__ _ /27_'_ _/"/.-"_F_2J_ _ 32A_3_ /, o 35 O, No. 247.887760 Craftsman Engine Model No. 12S905-0732-B1 For Craftsman Mower Model No. 247.887760 358 ENGINE GASKET SET 1430 524 30 0 © 883 883 20_ 0 993 868 51 1022 1095 VALVE GASKET SET O 0 883 121 CARBURETOR OVERHAUL KIT 883 623 993 868 51 IOS_ O 623 1022 104 163 163 137 0 276 36 d_ Craftsman Engine Model No. 12S905=0732=B1 796509 CylinderAssembly 3 299819S Seal-Oil 4 493279 5 For Craftsman Mower Model No. 247.887760 690977 Tappet-Valve 46 694039 Camshaft Sump-Engine 51 796596 Gasket-Intake 796471 Head-Cylinder 58 697316 Rope-Starter 7 11 796475 796478 Gasket-CylinderHead Tube-Breather 60 795426 75 691736 12 692232 Gasket-Crankcase 78 793480 Screw 13 793451 Screw 81 691740 Lock-MufflerScrew 15 691680 Plug-OilDrain 104 691242 Pin-FloatHinge 16 796469 Crankshaft 105 398188 Valve-FloatNeedle 20 399781S Seal-Oil 117 697355 Jet-Main 22 691092 Screw 118 494870 Jet-Main 23 796619 Flywheel 121 796612 Kit-CarburetorOverhaul 24 222698S Key-Flywheel 122 796595 Spacer-Carburetor 25 796639 PistonAssembly(Standard) 125 796608 Carburetor 25 796640 PistonAssembly(.020"Oversize) 133 398187 Float-Carburetor 26 796641 RingSet(Standard) 137 796610 Gasket-FloatBowl 26 796642 RingSet(.020"Oversize) 163 691894 Gasket-AirCleaner 27 691588 Lock-PistonPin 187 796491 Line-Fuel 28 298909 Pin-Piston 192 796631 Adjuster-RockerArm 29 796470 Rod-Connecting 202 796657 Link-MechanicalGovernor 32 691664 Screw 209 796484 Spring-Governor 32A 695759 Screw 216 796485 Link-Choke Grip-Starter Rope Washer 33 499642 Valve-Exhaust 222 796482 Bracket-Control 34 795443 Valve-Intake 227 796487 Lever-GovernorControl 35 691304 Spring-Valve 238 691300 Cap-Valve 36 691304 Spring-Valve 276 271716 Washer-Sealing 37 796536 Guard-Flywheel 291 796486 Thermostat 40 692194 Retainer-Valve 300 796495 Muffler-Exhaust 43 796650 Slinger-Governor/Oil 304 796693 Housing-Blower 37 Craftsman Engine Model No. 12S905=0732=B1 For Craftsman Mower 796535 Shield-Cylinder 307 793480 Screw 309 796842 332 Model No. 247.887760 792685 Harness-Wiring 830 796472 Stud-RockerArm Motor-Starter 842 691031 SeaI-ORing 690662 Nut 847 796501 Dipstick/TubeAssembly 333 796499 Armature-Magneto 868 795440 Seal-Valve 334 793454 Screw 875 796492 Base-AirCleaner 337 692051 Plug-Spark 883 793497 Gasket-Exhaust 356 692390 Wire-Stop 883A 796677 Gasket-Exhaust 358 796661 GasketSet-Engine 886 796474 GasketKit-CylinderHeadPlate 794451 Screw 365 793458 Screw 914 404 690272 Washer 922 692135 Spring-Brake 795066 Filter-AirCleanerCartridge 923 796635 Brake 7962541- Filter-AirCleanerFoam(Not Shown) 957 796577 Cap-FuelTank 793515 Nut 957A 692046 Cap-FuelTank 445 505 Dipstick 968 796493 Cover-AirCleaner 524 692296 Seal-DipstickTube 972 796489 Tank-Fuel 525 796502 Tube-Dipstick 975 796611 Bowl-Float 562 793514 Bolt 993 796473 Gasket-CylinderHeadPlate 592 793481 Nut 1022 796480 Gasket-RockerCover 601 791850 Clamp-Hose 1023 796479 Cover-RockerArm 608 796497 Starter-Rewind 1026 796481 Rod-Push 613 796496 Screw 1029 691230 Arm-Rocker 615 796674 Retainer-Governor Shaft 1034 691343 Guide-PushRod 616 796488 Crank-Governor 1036 Label-Emissions Switch-Stop 1058 278415 Manual-Operator's Kit-Screw/Washer 523 796503 621 692310 623 793628 SeaI-ORing 1059 793471 635 66538S Boot-SparkPlug 1095 796662 GasketSet-Valve 662 796537 Stud 1263 697124 Reed-Breather 662A 793479 Stud 1264 793453 Screw 670 793485 Spacer-FuelTank 1319 794467 Label-Warning 697 691127 Screw 1375 796476 Cover-Breather/Reed 718 690959 Pin-Locating 1376 794451 Screw 741 Gear-Timing 1395 690349 Screw Screw 1430 796477 Gasket-Breather/Reed 795755 745 698557 l-If Equipped 38 39 (Thispage applicablein the U.S.A.and Canadaonly.) Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board (CARD) and the United States Environmental Protection Agency (U.S. EPA) Emission Control System Warranty Statement (Owner's Defect Warranty Rights and Obligations) EMISSIONCONTROLWARRANTYCOVERAGEISAPPLICABLETO CERTIFIEDENGINESPURCHASEDIN CALIFORNIAIN 1995ANDTHEREAFTER,WHICHARE USEDINCALIFORNIA,ANDTO CERTIFIEDMODEL California and United States YEAR 1997AND LATERENGINESWHICHARE PURCHASEDAND USED ELSEWHEREIN THE UNITEDSTATES(ANDAFTERJANUARY1,2001 IN CANADA). Emission Control The CaliforniaAir ResourcesBoard(CARD),U.S.EPAand Searsare pleased to explainthe EmissionControlSystemWarrantyon your modelyear2000and latersmalloff-roadengine(SORE).In California,newsmall off-roadengines mustbe designed,builtand equippedto meetthe State'sstringentanti-smog standards.Elsewherein the UnitedStates, newnon-road,spark-ignition enginescertifiedfor modelyear 1997and latermustmeetsimilar standardsset forth bythe U.S.EPA.Sears mustwarrantthe emissioncontrol systemon your Sears Emission Control Statement parton yourengineis defective,the part will be repairedor replacedbySears. Warranty Responsibilities Asthe smalloff-roadengine owner,you are responsiblefor the performanceof the requiredmaintenancelistedin yourOperatingand MaintenanceInstructions.Searsrecommendsthatyou retain all yourreceiptscoveringmaintenance on yoursmalloff-roadengine,but Sears cannotdenywarrantysolelyfor the lackof receiptsor for yourfailureto ensurethe performanceof all scheduled maintenance.As the smalloff-roadengineowner,you shouldhoweverbe awarethat Searsmay denyyou warrantycoverageif your smalloff-roadengine or a part hasfailed dueto abuse,neglect,impropermaintenanceor unap- Sears Emission Warranty Defects Warranty Coverage Smalloff-roadenginesarewarrantedrelativeto emissioncontrol partsdefects fora periodof one year,subjectto provisionsset forth below.Ifany covered Owner's Defects enginefor the periodsoftime listedbelow,providedtherehas been noabuse, neglector impropermaintenanceof your smalloff-roadengine.Youremission controlsystemincludespartssuch as the carburetor,air cleaner,ignition system,mufflerand catalyticconverter.Also includedmay be connectorsand otheremissionrelatedassemblies.Wherea warrantableconditionexists,Sears will repairyour smalloff-roadengineat no costto you includingdiagnosis,parts and labor. provedmodifications.You are responsiblefor presentingyour smalloff-road engineto an AuthorizedSearsServiceDealeras soonas a problemexists.The undisputedwarrantyrepairsshouldbe completedina reasonableamountof time,not to exceed30 days. Ifyou haveany questionsregardingyourwarranty rightsand responsibilities,you shouldcontacta SearsService Representative at 1-800-469-4663. The emissionwarrantyis a defectswarranty.Defectsare judged on normalengineperformance.Thewarrantyis not relatedto an in-use emissiontest. Control Defects Warranty Provisions Thefollowingarespecificprovisions relativetoyourEmission ControlDefectsWarranty Coverage. It isin addition totheSearsenginewarranty fornon-regulated enginesfound in the Operatingand MaintenanceInstructions. 1. WarrantedParts 3. NoCharge Repairor replacementof anyWarrantedPartwill be performedat no chargeto the owner,includingdiagnosticlabor whichleads to the determinationthata WarrantedPartis defective,if the diagnosticwork is performedat an AuthorizedSears ServiceDealer.For emissionswarranty servicecontact yournearestAuthorizedSears ServiceDealeras listed in the "YellowPages"under"Engines,Gasoline,""GasolineEngines,""Lawn Mowers,"or similar category. 4. Claimsand CoverageExclusions Warrantyclaimsshall be filed in accordancewiththe provisionsof the Sears EngineWarrantyPolicy.Warrantycoverageshall be excludedfor failuresof WarrantedPartswhichare not original Sears partsor because of abuse, neglector impropermaintenanceas setforth inthe Sears EngineWarrantyPolicy.Sears is not liableto coverfailuresof Warranted Partscausedby the use of add-on, non-original,or modifiedparts. 5. Maintenance Coverageunderthis warrantyextendsonly to the parts listedbelow (the emissioncontrolsystemsparts)to the extentthese partswere presenton the engine purchased. a. FuelMeteringSystem • Cold start enrichmentsystem • Carburetorand internalparts • FuelPump b. Air lnduction System • Air cleaner • Intakemanifold c. IgnitionSystem • Spark plug(s) • Magnetoignitionsystem d. CatalystSystem • Catalyticconverter • Exhaustmanifold Any WarrantedPart whichis not scheduledfor replacementas required maintenanceor whichis scheduledonly for regularinspectionto the effect of "repairor replaceas necessary"shallbe warrantedasto defectsfor the warrantyperiod.Any WarrantedPartwhich is scheduledfor replacement as requiredmaintenanceshallbe warrantedasto defectsonly forthe periodof time up to the first scheduledreplacementfor that part. Any replacementpart that is equivalentin performanceand durabilitymay be usedin the performanceof any maintenanceor repairs.The owneris responsibleforthe performanceof all requiredmaintenance,as definedin the SearsOperatingand MaintenanceInstructions. 6. ConsequentialCoverage Coveragehereundershallextend to the failure of any engine components caused bythe failureof any WarrantedPartstill underwarranty. • Air injectionsystemor pulsevalve e. MiscellaneousItemsUsedin AboveSystems • Vacuum,temperature,position,time sensitivevalves andswitches • Connectorsandassemblies 2. Lengthof Coverage Searswarrantsto the initialownerand eachsubsequentpurchaserthat the WarrantedParts shallbe free from defects in materialsandworkmanshipwhich causedthe failure of the WarrantedPartsfor a periodof one yearfrom the datethe engineis deliveredto a retailpurchaser. Inthe USAandCanada,a 24 hour hot line, 1-800-469-4663,has a menu of pre-recordedmessagesofferingyou enginemaintenanceinformation. GDOC-100188Rev.A 40 Look For Relevant Emissions Durability Period and Air index information On Your Engine Emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and the Air Index. Sears, Roebuck and Co., U.S.A. makes this information available to the consumer on our emission labels. The Emissions Durability Period describes the number of hours of actual running time for which the engine is certified to be emissions compliant, assuming proper maintenance in accordance with the Operating & Maintenance Instructions. The following categories are used: Moderate: Engine is certified to be emission compliant for 125 hours of actual engine running time. Intermediate: Engine is certified to be emission compliant for 250 hours of actual engine running time. Extended: Engine is certified to be emission compliant for 500 hours of actual engine running time. For example, a typical walk-behind lawn mower is used 20 to 25 hours per year. Therefore, the Emissions Durability Period of an engine with an intermediate rating would equate to 10 to 12 years. The Air Index is a calculated number describing the relative level of emissions for a specific engine family. The lower the Air Index, the cleaner the engine. This information is displayed in graphical form on the emissions label. After After July 1, 2000 certain Environmental Protection sions Compliance Period for which the engine has July 1,2000, Look For Emissions Compliance On Engine Emissions Compliance Label Period Sears, Roebuck and Co., U.S.A. engines will be certified to meet the United States Agency (USEPA) Phase 2 emission standards. For Phase 2 certified engines, the Emisreferred to on the Emissions Compliance label indicates the number of operating hours been shown to meet Federal emission requirements. For engines less than 225 cc displacement, For engines of 225 cc or more, Category Category C = 125 hours, B = 250 hours and A = 500 hours. C = 250 hours, B = 500 hours and A = 1000 hours. This is a generic representation of the emission label typically found on a certified engine. FAMILY YBSXS.3192VA 274812 GDOC-100182 Rev.A 41 Congratulationson makinga smartpurchase.YournewCraftsman@ productis designedand manufacturedfor yearsof dependableoperation. But likeall products,it may requirerepairfrom time to time.That's whenhavinga RepairProtectionAgreementcansave youmoneyand aggravation. Here'swhat the RepairProtectionAgreement*includes: * Expert service byour 10,000professionalrepairspecialists o Unlimitedserviceand no chargefor partsand laboron all coveredrepairs o Product replacementup to $1500if yourcoveredproductcan't be fixed • Discountof 10%from regularprice of serviceand relatedinstalled parts notcoveredby theagreement;also, 10%off regularpriceof preventivemaintenancecheck • Fast help by phone- we call it RapidResolution- phone support from a Searsrepresentative.Thinkof usas a "talkingowner's manual." 42 Onceyou purchasethe Agreement,a simplephonecall is all that it takesfor youto scheduleservice.Youcan call anytimedayor night,or schedulea serviceappointmentonline. The RepairProtectionAgreementis a risk-freepurchase.If youcancel for any reasonduringthe productwarrantyperiod,wewill providea full refund.Or,a proratedrefundanytimeafter the productwarrantyperiod expires.Purchaseyour RepairProtectionAgreementtoday! Somelimitationsand exclusionsapply. For pricesand additional informationin the U.S.A. call 1-800-827-6655. *Coverage in Canadavaries on some items. Forfull details call Sears Canadaat 1-800-361-6665. Sears Installation Service ForSearsprofessionalinstallationof homeappliances,garagedoor openers,waterheaters,and othermajorhomeitems,in the U.S.A.or Canadacall 1-800-4-MY-HOME®. Declaraci6n de garantia .................................................. 43 Instrucciones de seguridad ....................................... 44-48 Guia de cuesta ................................................................ 49 Etiquetas de seguridad ..................................................... 9 Montaje ..................................................................... 50-53 Garantia Operaci6n .................................................................. 54-55 Servicio y Mantenimiento ......................................... 56-62 Almacenamiento fuera de temporada ............................ 63 Soluci6n de problemas ................................................... 64 NOmero de servicio ............................... Cubierta posterior Profesional de Craftsman Si este productoCraftsmanfalla debidoa un defectoen los materialeso la manode obra dentrode los dos aSosde la fechade compra,sirvase devolverloa cualquiertiendaSears,Centrode servicioSears,u otro puntode venta Craftsmanen los EstadosUnidosparasu reparaci6nsin cargo(o reemplazosi la reparaci6ndemuestraimposible). Estagaranfias61otendr&validezduranteuno aSosi este productose utilizaen cualquiermomentopara fines comercialeso de alquiler. Esta garantiacubreSOLO defectos en materialy habilidad.Sears no pagar_para: • Articulosde duraci6nlimitadaque puedendesgastarsebajo condicionesnormalesde uso duranteel periodode garantia,tales como cuchillasde cortadora rotativas,adaptadorespara cuchillas,correas,filtrosde aire,y bujiasde encendido. • Las reparacionesrequeridasdebidoa abusoo negligenciadel operador,incluiyendo abolladurasdel cig(Je_aly no operaro mantenerel equipode acuerdoconlas instrucciones suministradas. Mantenimientopreventivoo reparacionesnecesariasdebido a mezclade combustibleimpropia, combustiblecontaminadoo a_ejo. • Estagarantiale otorgaderechoslegalesespecificos,pero ustedpodria gozarde otros derechosen raz6nde su lugarde residencia. Sears, Roebuck and Co., HoffmanEstates, IL 60179 Aceitedel motor: SAE30 Capacidadde aceitedel motor: 18onzas Combustible: Bujia: Gasolinasin plomo Champion®RC12YC Motor: Briggs& Stratton © SearsBrands,LLC NSmero de modelo .......................................................... N_mero de serie .............................................................. Fechade compra ............................................................. Registreel nQmerode modelo,nQmerode seriey fechade compra m&sarriba. 4.3 Esta rn_.quinarueconstruidapara seroperadade acuerdocon las reglasde seguridadcontenidasen este manual.AI igualque concualquiertipo de equipo rnotorizado,un descuidoo error por partedel operadorpuedeproducirlesionesgraves.Estarn_.quina es capazde arnputarrnanosy piesy de arrojarobjetoscon gran fuerza.De no respetarlas instruccionesde seguridadsiguientesse puedenproducirlesionesgraveso la rnuerte. La presenciade este sirnboloindicaque setrata de instrucciones irnportantesde seguridadque se deben respetarpara evitar poneren peligrosu seguridadpersonaly/o materialy la de otras personas.Lea y sigatodas lasinstruccionesde este manualantes de poneren funcionarnientoesta rn_.quina.Si no respetaestas instruccionespodria provocarlesionespersonales.Cuandoveaeste sirnbolo,i presteatenci6na la advertencia! PROPOSICION Su responsabilidad--Restrinja el usode esta rn_.quina rnotorizadaa las personasque lean,cornprendany respetenlas advertenciase instruccionesque aparecenen este manualy en la rn_.quina. 65 DE CALIFORNIA El escapedel motorde este producto,algunosde sus cornponentes y algunoscornponentesdel vehiculocontieneno liberansustancias quirnicasque el estadode Californiaconsideraque puedenproducir c_.ncer,defectosde nacirnientou otros problernasreproductivos. Losbornesde la bateriay losaccesoriosdines contienenplornoy cornpuestosde plorno,sustanciasqdrnicas que segOnIoestablecido pot el Estadode Californiacausanc_.ncery da_osen el sisterna reproductivo.Ldveselas manos despu_sde estar en contacto con estoscomponentes. iGUARDE ESTAS INSTRUCCIONES! FUNCIONAIVIIENTO • Funcionarniento general: • Lea y siga todaslas instruccionescontenidasen este manual antesde intentarensarnblaresta rn_.quina.Lea,cornprenday sigatodas las instruccionesque figuranen la rn_.quina yen el o los rnanualesantesde intentaroperarla.Farniliaricesecornpletarnentecon loscontrolesy conel uso apropiadode esta rn_.quina antesde operarla.Guardeeste manualen un lugarseguropara referenciasfuturasy regulatesy para solicitarrepuestos. • • Esta rn_.quina es una piezade equipode precisi6n,no un juguete. • Por tanto,tengala maximaprecauci6nen todornornento.Su unidadha sidodise_adapara realizaruna tarea:cortar el c_sped. No la utilicecon ningOnotto prop6sito. No perrnitanuncaque losni_os rnenoresde 14a_osoperenesta rn_.quina.Los ni_osde 14a_osy rn_.sdeben leer y cornprender las instruccionescontenidasen este manualy debenser • capacitadosy supervisadospor unode los padres.Onicarnente los individuosresponsablesque se hayanfarniliarizadocon estasreglasde seguridadpara la operaci6ndeber_.nusaresta rn_.quina. • • 44 Inspeccionerninuciosarnente el _.reaen donde utilizar_,el equipo. Saquetodas las piedras,palos,cables,huesos,juguetesy otros objetosextra_oscon los que podriatropezaro que podrianser arrojadospor la cuchilla.Losobjetosarrojadospor la rn_.quina puedenproducirlesionesgraves.Planifiqueel patr6nen el que va a ir descargandoel recortepara evitarque la descargade materialse realicehacialoscarninos,las veredas,losobservadotes,etc. Eviteadern_.sdescargarmaterialcontralas paredesy obstruccionesque podrianprovocarque el materialdescargado rebotecontrael operador. Paraayudara evitarel contactocon la cuchillao una lesi6npor un objetoarrojado,rnant_ngaseen la zonadel operadordetr_.s de las rnanijasy rnantengaa los ni_os,observadores,ayudantes y rnascotasapartadosal rnenos25 metrosde la podadora rnientrasest,. en operaci6n.Detengala rn_.quinasi alguienentra en la zona. Paraprotegerselosojos utilice siernpreanteojoso antiparras de seguridadrnientrasopera la rn_.quina o rnientrasla ajusta o repara.Losobjetosarrojadosque rebotanpuedenlesionar gravernentela vista. Utilicezapatosde trabajoresistentes,de suelafuerte y pantaIonesy carnisasajustados.Se recorniendautilizarcarnisasy pantalonesque cubranlos brazosy las piernas,asi cornocalzado con puntasreforzadasen acero.Nuncaopereesta rn_.quina con los pies desnudos,sandalias,o conzapatosligeroso con losque se pueda resbalar(por ejernplo,calzadode Iona). Noponga las rnanoso los piescerca de las piezasrotatoriaso en la tolva de la cortadora.El contactocon las cuchillaspuede producirla arnputaci6nde rnanosy pies. • 1. Unacubiertade descargafaltanteo da_adapuede provocarel contactocon la cuchillao lesionesporobjetosarrojados. Muchaslesionesocurrencornoresultadode pasarla cortadora sobrelos piesduranteuna caida provocadapor derrapeso tropiezos.No se sostengade la podadorasi se est,. cayendo, sueltela rnanijainmediatarnente. Nuncatire haciausted la podadorarnientrascarnina.Si debe retrocederla podadorapara evitaruna paredu obst_.culo,mire prirneroabajoy atr_.sparaevitar tropezarsey luegosigaestos pasos: Retrocedade la podadorahastaestirar cornpletarnentesus brazos. 2. 3. AsegOreseque est,. bienequilibradoy bien parado. Tirede la podadoralentarnentehaciausted,no rn_.sall_.de la rnitadde la distanciaentreustedy la podadora. 4. • Repitaestospasoscornose requiera. No opereesta rn_.quinaestandobajo losefectosdel alcoholo de drogas. No ernbragueel mecanisrnode autopropulsi6nen unidadescon este equipornientrasarrancael motor. • • • Nuncaopere la cortadorasin las guardasapropiadas,cubiertade descarga,guardapara recorte,rnanijade control de la cuchilla y otrosdispositivosde seguridady protecci6nen su lugary funcionando.Nuncaopere la cortadorasi los dispositivosde seguridadest_.nda_ados.Si no Io hace,esto puedetenet corno resultadolesiones. El silenciadory el motorse calientany puedenproducirquernaduras. Nolos toque. • Utilicesolarnentepartesy accesoriosfabricadosespecialrnente paraesta rn_.quina,originalesdel fabricante(OEM). Si no Io hace,esto puedetenercornoresultadolesionespersonales. Paraencenderel motor,jale de la cuerdalentarnentehastaque sientaresistencia,luegojale [email protected] replieguer@idode la cuerdade arranque(tensi6nde retroceso)le jalar_,la rnanoy el brazohaciael motorrn_.sr@idode Ioque ustedpuedesoltar. El resultadopuedenser huesosrotos,fracturas,hernatornaso esguinces. • Si se presentansituacionesque no est_.nprevistasen este manualseacuidadosoy useel sentidocornQn.Contacto1-800659-5917para inforrnaci6ny asistencia. DIENTES El rnecanisrnode control de la cuchillaes un dispositivode seguridad.Nuncaintentedesviarsede su funcionarniento.De hacerlono funcionarianlos dispositivosde seguridady podrian producirselesionespersonalesporel contactocon lascuchillas giratorias.Lasrnanijasde controlde la cuchilladeben funcionar bien en arnbasdireccionesy regresarautorn_.ticarnente a la posici6nde desengranecuandose las suelta. Nuncaopere la podadoraen c_spedhOrnedo.Siernpreest_ segurode su equilibrio.Si tropiezay cae puedelesionarse gravernente.Si sienteque pierdeel equilibrio,suelte inrnediatarnentela rnanijade controlde la cuchillay la cuchilladejar_,de girar en tres segundos. Laspendientessonun factorirnportanteque se relacionacon los accidentesproducidosporderrapesy caidasy que puedenpro@@ lesionesgraves.La operaci6nen pendientesrequieremayorprecauci6n.Si no se sienteseguroen una pendiente,no la pode.Para seguridad,use el rnedidorde pendientesque se incluyecornopartede este manualpararnedirla pendienteantes de operar la unidaden una zonainclinada.Si la pendientesuperalos 15grados,no la pode. HagaIo siguiente: • Muevala podadoraa travesde las carasde la pendiente,nunca haciaarriba y abajo.Tengacuidadocuandocarnbiede direcci6n cuandooperela rn_.quinaen pendientes. • Est_atentoa los agujeros,raices,rocas,objetosocultoso abultarnientosque puedanprovocarque sederrapeo se tropiece. El c_spedalto puedeocultarobst_.culos. • Corteel cespedsolarnentecon luz de dia o con una buenaluz artificial.Carnine,nuncacorra. • Detengala cuchillacuandocruce carninosde gravilla,pasoso andadores. • Si la rn_.quinacornenzaraa vibrarde rnaneraanorrnal,detenga el motor,y busqueinrnediatarnentela causa.La vibraci6npor Io generales una advertenciade algQnproblerna. Apagueel motor y esperehastaque la cuchillase detenga cornpletarnente antes de retirarla guardapara el recortede cespedo desatorarla tolva. La cuchillacontinOagirando por unoscuantossegundosdespu_sque el motorse ha apagado. Nuncacoloqueningunapartedel cuerpoen el _.reade la cuchilla hastaque est_ seguroque la cuchilla ha detenidosu rnovirniento rotatorio. • • 45 Siernpreest_ segurode su equilibrio.Si tropiezay cae puede lesionarsegravernente.Si sJenteque pier@el equilibrio,suelte inrnediatarnentela rnanijade controlde la cuchillay la cuchilla dejar_,de girar en tres (3) segundos. No haga Io siguiente: • • • I/o corte el cespedcercade pozos,hundirnientos,bancos,podria perderel equilibrio. Nopode pendientesrnayoresde 15 gradoscornoIo indicael rnedidorde pendientes. Nopode el cespedhOrnedo.Si no est,. firrnernenteparado,puede resbalarse. N QOS Puedenocurriraccidentestr_.gicossi el operadorno est,. atentoa la presenciade ni_os.Por Iogenerala los ni_osles atraenlas podadoras • y la actividadde podarel c_sped.Noentiendenlos riesgosni los peligros.Nuncad_ por sentadoque los ni_osperrnanecer_.n en el rnisrnolugardonde losvio por Oltirnavez. • • Mantengaa los ni_osfuera del Areade trabajoy bajo estricta vigilanciade un adultoresponsableadern_.sdel operador. • Est_alerta y apaguela podadorasi un ni_o ingresaal Area. Antesy rnientasse est,. rnoviendohaciaatr_.s,mirehaciaatr_.sy cuideque no hayani_os. • Tengaextrernaprecauci6ncuandoseaproxirnea esquinas ciegas,entradasde puertas,_.rbolesu otrosobjetosque puedan obstaculizarlela vista de un ni_oque pudiesecorrerhaciala podadora. Mantengaalejadosa los ni_osde los rnotoresen rnarchao calientes.Puedensufrirquernadurascon un silenciadorcaliente. • Nuncaperrnitaque ni_osrnenoresde 14a_osoperenesta rn_.quina.Los ni_osrnayoresde 14 a_osdebenleer y entender las instruccionesde operaci6ny reglasde seguridadcontenidas en este manualy debenser entrenadosy supervisadospor sus padres. • Manejo segurode la gasolina: • Paraevitar lesionespersonaleso daSosrnaterialessea surnarnentecuidadosoal rnanipularla gasolina.La gasolinaes altarnenteinflarnabley losvaporesson explosivos.Se puede lesionargravernentesi derrarnagasolinasobreustedo sobrela ropaya que se puedeencender. Utilices61orecipientesparagasolinaautorizados. NuncaIlenelos contenedoresen el interiorde un vehiculo o carni6no caja de carnionetacon recubrirnientospl_.sticos. Coloquesiernprelos recipientesen el pisoy lejosdel vehiculo antesde Ilenarlos. • Retireel equipoa gasolinadel carni6no rernolquey II_neloen el piso.Si esto no es posible,entoncesIlenedichoequipo en un rernolquecon un recipienteport_.til,en vez de desdeun dispensadorde gasolina. Mantengala boquillade Ilenadoen contactocon el horde de la entradadel tanquede gasolinao contenedoren todornornento hastaque est_ Ileno.No utilice un dispositivopara abrir/cerrarla boquilla. • • Apaguetodos los cigarrillos,cigarros,pipasy otras fuentesde cornbusti6n. • Nuncacarguecombustibleen la rn_.quinaen interioresporque Losvaporesinflarnablespodrianacurnularseen el _.rea. Vuelvaa colocar la tapade la gasolinay ajOstelabien. Lirnpiela gasolinaderrarnadasobreel motory el equipo.Traslade la rn_.quinaa otrazona. Espere5 rninutosantesde encenderel motor. Nuncaalrnacenela rn_.quina o el recipientede combustibleen unespaciocerradodondehayafuego,chispaso aparatoscon pilotocornopor ejernplo,calentadoresde agua,calentadores, hornos,secadoresde ropau otrosaparatosa gas. Parareducirel riesgode incendiornantengala rn_.quinalirnpia de pasto,hojasy de acurnulaci6nde otrosescornbros.Lirnpielos derrarnesde aceiteo combustibley saquetodos losdesechos ernbebidoscon combustible. Dejeque la rn_.quina se enfrie5 rninutospor Iornenosantesde alrnacenarla. Funcionamiento generah • Nuncaenciendaun motoren espacioscerradoso en una zona con pocaventilaci6n.El escapedel motorcontienernon6xidode carbono,un gas inodoroy letal. SERVIClO • • Nuncasaquela tapadel gasni agreguecombustiblernientrasel motorest,. calienteo en rnarcha.Dejeque el motorse enfriepor Io rnenosdos rninutosantesde volvera cargarcombustible. Nuncarecargueel tanquede combustible.Lleneel tanqueno rn_.sde 1 pulgadapor debajode la basedel cuellode Ilenado para dejar espacioparala expansi6ndel combustible. 46 • Antesde lirnpiar,repararo inspeccionarla rn_.quina,cornpruebe que lacuchillay todas las partesque se rnuevense han detenido. Desconecteel cablede la bujiay p6ngalode rnaneraque haga rnasacontrael motorpara evitarque se enciendade rnanera accidental. • Reviselos pernosde rnontajede la cuchillay del motora intervalosfrecuentesparaverificarque est_nbien apretados. Inspeccioneadern_.svisualrnentela cuchillaen buscade daSos (abolladuras,desgaste,roturas,etc.). Reernplacela cuchillacon equipooriginaldel fabricante(OEM)listadoen este manual.La utilizaci6nde partesque no curnplancon lasespecificacionesde equiposoriginalespodriatenet cornoresultadoun rendirniento incorrectoy adern_.sla seguridadpodriaestar cornprornetida. • Lascuchillasde las podadorasson rnuyafiladasy podrian cortarlo.Envuelvala cuchillao utilice guantesy extremeprecauclones cuandole de servicio. • Mantengatodos los pernos,tuercasy tornillosbien ajustados para asegurarseque la rn_.quinaseencuentraen condiciones segurasde operaci6n. • Nuncarnanipulelosdispositivosde seguridadde rnanera irnprudente.Controleperi6dicarnenteque funcionende forrna adecuada. • • • • • • NO MODIFIQUE Despu_sde golpearcon algOnobjetoextrafio,detengael motor, desconecteel cablede la bujfay conecteel motora rnasa. Inspeccionerninuciosarnente la rn_.quinaparadeterrninarsi est,. dafiada. Repareel dafio antesde encenderlay operarla. Nuncatrate de ajustaruna ruedao la alturade corte rnientrasel motorest,. en rnarcha. Paraevitarlesionesgraveso la rnuerte,no rnodifiqueel motorbajo ningunacircunstancia.Si carnbiala configuraci6ndel reguladorde[ motorel motor puededescontrolarsey operara velocidadesinseguras. Nuncacarnbiela configuraci6nde f_.bricadel reguladordel motor. AVISO REFERIDO Loscornponentesde la tolva para recorte,cubiertade descargay escudode riel,est_.nsujetosa desgastey dafios que podriadejar expuestaspartesque se rnueveno perrnitirque se arrojenobjetos. Paraprotegersu seguridad,verifiquefrecuenternentetodos los cornponentesy reernpl_.celos s61ocon partesde losfabricantesde equiposoriginales(O.E.M.)listadasen este manual. La utilizaci6nde partesque no curnplancon las especificaciones de equiposoriginalespodriatenercornoresultadoun rendirniento incorrectoy adern_.sla seguridadpodriaestar comprornetida. No carnbiela configuraci6ndel reguladordel motorni acelere dernasiadoel rnisrno.El reguladorcontrolala velocidadrn_.xirna segurade operaci6ndel motor. Verifiquefrecuenternentela Ifneade combustible,el tanque,el tap6n,y losaccesoriosbuscandorajaduraso perdidas.Reernplacede set necesario. No d_ arranqueal motor si no est,. la bujfade encendido. A EMISIONES Losrnotoresque est&ncertificadosy curnplencon las regulaciones de ernisionesfederalesEPAy de Californiapara SORE(Equipos pequefiostodoterreno)est_.ncertificadosparaoperarcon gasolina cornOnsinplornoy puedenincluirlossiguientessisternasde control de ernisiones:Modificaci6nde motor(EM) y catalizadorde tres vias (TWO)si est_.nequipadosde esa rnanera. GUARDACHISPAS Esta rn&quinaest,. equipadacon un motorde cornbusti6ninternay no debe ser utiiizadaen o cercade un terrenoagrestecubiertopor bosque,rnalezaso hierba exceptosi el sisternade escapedel motor est,. equipadocon un arnortiguadorde chispasque curnplaconlas [eyeslocaleso estataiescorrespondientes,en caso de haberlas. Si se utiiizaun arnortiguadorde chispasel operadorIo debe rnantener en condicionesde usoadecuadas.Enel Estadode California [as • Mantengao reernpiace[asetiquetasde seguridad,segOnsea necesario. • Observelasleyes y norrnasaplicablespara disponeradecuadarnentede los desechos.La descargainapropiadade liquidos o rnaterialespuededafiar e[ medicarnbiente. SegOnla Cornisi6nde Seguridadde Productospara el Consurnidorde los EstadosUnidos(CPSC)y la Agenciade Protecci6n Arnbientalde los EstadosUnidos(EPA),este productotiene una vidadtil media de siete (7) afios, 6 140horasde funcionarniento. AI finaiizar[avida dtilmedia, adquierauna rn_.quinanuevao haga inspeccionaranualrnente_sta Searspor uno u otrodistribuidorde serviciosparacerciorarsede que todos los sisternas rnec_.nicosy de seguridadfuncionancorrectarnentey no tienen excesivodesgaste.Si no 1ohace,puedenproducirseaccidentes, [esioneso rnuerte. • EL MOTOR 4.7 rnedidasanteriorrnenternencionadassonexigidaspor ley (Arficulo 4442 del C6digode RecursosPOblicosde California).Es posible que existanleyessirnilaresen otros estados.Lasleyesfederalesse aplicanen territoriosfederaies. Puedeconseguirel arnortiguadorde chispasparael silenciadora travesde sudistribuidorautorizadode rnotoreso poni_ndoseen contactocon el centrode servicioSears. SilVIBOLOS DE SEGURIDAD Esta p&ginarepresentay describela seguridadlos simbolosque puedenpareceren este producto.Lea,comprenda,y sigatodas instrucciones en la m_quinaantesprocurarpara reuniry operar. i LEA EL MANUAL(S) Lea, comprenda, i DEL OPERADOR y siga todas instrucciones en el manual (manuales) antes procurar para reunir y operar. PELIGRO-- GIRANDO HOJAS Para reducir el riesgo de herida, guarde de descarga o el receptor inmediatamente. manos y pies lejos. No funcione de hierba est_n en su lugar apropiado. a menos que la tapa De ser dahado, sustituya ® PELIGRO-- ESPECTADORES No siegue cuando PELIGRO-- los nihos o los otros est_in alrededor. DE EL CORTE DE PIE/ Guarde manos y pies lejos de hacer girar partes. PELIGRO-- ESCOMBROS LANZADOS Quite objetos que pueden ser lanzados por la I_imina en cualquier direcci6n. Lleve gafas de seguridad. PELIGRO-- CUESTAS Use extra la precauci6n en cuestas. No siegue cuestas mayores que 15 o ADVERTENCIA DESPIDA Para reducir el riesgo de incendio otros escombros. mantenga la m_iquina limpia de pasto, hojas y de acumulaci6n ADVERTENCIA VAPORES TOXICOS Nunca encienda motor contiene ADVERTENCIA-- un motor en espacios cerrados o en una zona con poca ventilaci6n. mon6xido de carbono, un gas inodoro El escape del y letal. SUPERFICIE CALIENTE Las partes del motor, especialmente Permita motor y silenciador el silenciador, Ilega a set muy caliente durante para ponerse frio antes de tocar. 48 la operaci6n. de U °_ r_ 0 E (D 0 0 r_ c5 (D C_ 0 °_ I i °_ :2 _-' o_ I I I I I 0 I l o5 m_ g" ; .- l l l m t"r_ l l l 0 l l 0 / / '_ 0 N-o 00 _ Z_ 0 "00 _ E / °m _E _x5 / 0 _o 49 f IMPORTANTE: Esta unidad se envfa sin gasolina ni aceite en el motor. Antes de comenzar o correr ia ma.quinacargue el motor con gasolina y aceite como se indica en la secci6n de operaci6n de este manual. NOTA: Las referencias a los lados derecho e izquierdo de ia cortadora de cesped se hacen observando la ma.quinadesde la posici6n de operaci6n. APERTURA DE LA CAJA DE CARTON 1. Corte cada una de ias esquinas de la caja verticaimente, de la parte superior a la base. 2. 3. Saque todas las piezas sueltas. Quite el material de empaque suelto. C61VIO SACAR 1. 2. LA UNIDAD DE LA CAJA Eleve la unidad desde la parte posterior para separarla del material de ia caja que quede debajo y haga rodar ia unidad fuera de ia caja. Verifique cuidadosamente si en la caja queda aiguna parte suelta. J PIEZAS SUELTAS DENTRO Figura1 DE LA CAJA Colector de cesped Adaptador del colector de pasto Tolvade descarga lateral Aceite del motor f iVIONTAJE IViontaje de la manija 1. Retire el material de empaque que pudiera estar entre las manijas superior e inferior. A. Tire hacia arriba y hacia atra.sia manija superior como se muestra en la Figura 1.Asegurese de que ia manija inferior este asentada firmemente en los soportes de montaje de la manija. Asimismo, no prense los cables mientras ievanta la manija. B. 2. ( Apriete las perillas estrella que sujetan la manija superior a la manija inferior.AsegQrese de que cada perno del carro est_ apropiadamente asentado en la manija. Localice el pasador de horquilla que se encuentra en el pasador soldado a cada lado de la manija inferior. A. Saque el pasador de horquilla de este orificio. Con un par de pinzas, inserte el pasador de horquilla en el agujero dei pasador mas cercano ai soporte. Vea ia Figura 2. Repita dei otto iado. B. Inserte el bul6n de carro en el manual de la bolsa en el orificio superior en el soporte de montaje de la manija. Sujete con una tuerca pl_.sticade mariposa, que tambi_n se incluyeen el manual de la bolsa. Vea la Figura 2. Repita del otto lado con los restantes hardware. NOTA: Aseguresede que el cable de transmisi6n quede alrededor de la parte exterior y pot encima de la manija inferior de manera que no interfiera cuando se acople la boisa colectora. La puerta del canal ha sido dise_ada para moverla cuerda del arrancador fuera del camino de la bolsa cuando la puerta del canal esta.abierta. 50 \ Figura2 3. La guia de la cuerda, que esta.conectada a lavariiia de sosten, se encuentrasobre el lade derecho de la manija inferior.Vea la Figura3. A. Sostenga la manija de control de la cuchilla contra la manija superior. B. Jale la cuerda de arranque para sacarla del motor. Suelte el control de la cuchilla. C. D. Deslice la cuerda de arranque en la guia. La atadura de cables use (s) para garantizar cable (s) para bajar de manejar. Conexi6n de la colectora de c_sped La cortadora fue enviada con iatolva de abono instalada en la unidad. Para fines de embolsado, debera,acoplar ia boisa colectora y su adaptador en lugar de la tolva de abono. 1. Extraiga ias tres tuercas de mariposa que sostienen ia toiva de abono en su iugar y retirela de la unidad. Vea ia Figura 4. 2. Reemplace con el adaptador de ia boisa colectora, asegurandose de que el labio frontal del adaptador encaje debajo del horde de la plataforma. Asegure con las tuercas de mariposa que extrajo antes. 3. Eleve ia puerta dei canal en el adaptador de la bolsa colectora y deslice la bolsa sobre el adaptador. Veala Figura 5. Figura 3 Figura4 51 Conexi6n de Canal de Descarga f Lateral Siga los pasos que se indican a continuaci6n para instaiar el canal de descarga lateral: 1. Extraiga la tolva de abono o el adaptador de la bolsa colectora de la unidad soltando las tuercas de mariposa. 2. Acople el canal de descarga lateral y asegure con las tres tuercas mariposa. Vea la Figura 6. AJUSTES Altura de torte La palanca de ajuste de aitura de corte se ubica por encima de la rueda izquierda trasera. Veael recuadro de la figura 7A. 1. Tire de la palanca hacia afuera de ia cortadora. 2. Mueva la palanca hacia adelante o hacia atra.spara la altura de corte deseada. 3. Libere la palanca hacia la plataforma de ia cortadora. La altura de corte de ia rueda frontal se determina seleccionando una de las seis posiciones en el montaje de cada ruedita. Para ajustar la altura de corte frontal, consulte ia Figura 7B y reaiice Io siguiente: 1. Extraiga iatuerca de mariposa del perno del eje. Deslice el perno del eje y la arandela ondulada fuera del montaje y seleccione la altura de corte. 2. Con ia arandeia ondulada sobre el perno del eje, reinserte los elementos de ferreterfa en el orificio cuadrado deseado a traves dei montaje de la rueda y asegure con ia tuera mariposa previamente extrafda. Figura 6 2/ IMPORTANTE: Todas las ruedas deben set colocadas en la misma posici6n relativa. Cuando el terreno es agreste o irregular cambie la palanca de ajuste de la altura a una posici6n ma.salta. De esta manera se cuida ma.sel cesped. Las rueditas pueden asegurarse en posici6n directamente hacia adelante o para que giren iibremente. Vea el recuadro de la figura 7C. 1. 2. Levantelos pasadoresdefijaci6n. Col6quelos en los agujeros ma.sgrandes para trabar las ruedas. Coloque los pasadores en los orificios ma.speque_os para permitir que las ruedas giren libremente. Control de la transmisi6n La rueda de ajuste esta.ubicada en el alojamiento de la manija de control de transmisi6n y se utiliza para ajustar o aflojar la correa de transmisi6n. Debera.ajustar el control de transmisi6n en caso de que: 1. 2. La cortadora no se autopropulsara con el control de transmisi6n engranado. Las ruedas de transmisi6n de la cortadora temblaran con el control de transmisi6n engranado. Si ocurriera alguna de estas condiciones, gire la rueda de ajuste en el sentido de las agujas del reloj para ajustar yen sentido contrario alas agujas del reloj para aflojar el cable para ajustar el control de transmisi6n. Vea la Figura 8. NOTA: Para algunas personas, el control de transmisi6n puede no encontrarse en una posici6n c6moda. Puede ajustar la manija apretando la rueda de ajuste. J Figura 8 52 f Control de la cuchilla Control de la transmisi6n___ de encendido electrico Palanca de ajuste de la altura de corte Arrancador de retroceso Tap6n de combustible Y 7 Tap6n de aceite/varilla de medici6n del nivel de Tolva de descarga lateral J Figura 9 CONTROL LLAVE DE LA CUCHILLA El control de la cuchilla esta.unido a la manija superior de la cortadora. Vea ia Figura 8. Presione el control de la cuchilia y aprietelo contra ia manija superior para operar la unidad. Sueltelo para detener el motor y la cuchilla. TOLVA DE DESCARGA LATERAL Su cortadora se envfa como abonadora. Para descargar los recortes de cesped pot el costado, siga las instrucciones de la secci6n Montaje para acoplar el canal de descarga lateral. DE LA Mantenga sus manos y pies alejados del area del canal de la plataforma de corte. Consulte la etiqueta de advertencias en la unidad. La palanca de ajuste de altura de corte se ubica por encima de la rueda izquierdatrasera. Para ajustar la altura de corte, consulte la Secci6n Montaje. CONTROL ELECTRICO La Navede encendido electrico esta.ubicada en el lado izquierdo dei panel de la manija. Se la utiliza Onicamentepara el encendido electrico. El control de ia cuchiiia es un dispositivo de seguridad. Nunca intente anular su funcionamiento. PALANCA DE AJUSTE ALTURA DE CORTE DE ENCENDIDO ARRANCADOR DE RETROCESO El arrancadorde retrocesoesta.conectadoa iavariilade soportey se ubicasobre el lado derechode lamanijainferior.Paraencenderla unidad col6quesedetra.sde ia mismay tire de ia cuerdadel arrancadorde retroceso. DE LA TRANSiVlISI6N TAPON DE GASOLINA El control de transmisi6n esta.ubicado en la manija superior. Apriete el control de la transmisi6n para engranar ei sistema de transmisi6n. Libere el control de transmisi6n para desengranar el sistema de transmisi6n. Retireel tap6n de gasolina para agregar combustible ai tanque de combustible. Use gasolina limpia, nueva, regular, sin plomo con un octanaje mfnimode 87. PALANCA TAPON DE ACEITE/VARILLA DEL NIVEL DE ACEITE DE CAIVIBIOS La palanca de cambios esta.ubicada en el alojamiento de control de transmisi6n sobre la manija superior. Esta palanca se utiliza para seleccionar ia velocidad de avance hacia adeiante de ia cortadora. Cuando cambie la selecci6n de velocidad, iibere el control de transmisi6n. IMPORTANTE: Mueva ia palanca de cambios s61ocuando el motor este en marcha. Si cambia el ajuste de la palanca de cambios con el motor apagado, su cortadora puede resultar da_ada. 53 DE iVlEDICI6N Consulte ia secci6n Mantenimiento para obtener instrucciones sobre c6mo verificar el aceite. ESCUDO DE RUTA El escudo de ruta se adjunta a la parte trasera de ia ma.quinay esta. ahf para proteger al operador de escombros que vuelan. No utilice el cortacesped a menos que el escudo es totalmente funcional yen su lugar. LLENADO DE GASOLINA f Y ACEITE Aceite (se envia una botella junto con la unidad) Primer uso 1. Saque la varilla del nivel de aceite (G). 2. 3. Con la cortadora de cesped ubicada en suelo nivelado, vierta el aceite bntamente pot dentro del tubo de Ilenadode aceite del motor (H) hasta la marca de limite alto en la varilla medidora del nivel de aceite (J). Vea la Figura 10. Vuelva a colocar la varilla de Ilenadode aceite y ajQstela. Usos posteriores Use aceite para motor de 4 tiempos que cumpla o sobrepase los requisitos para la clasificaci6n de servicio APi SK SG, SH, SJ o equivalente. Compruebe siempre ia etiqueta de servicio API en el recipiente dei aceite para asegurarse que incluye las letras SK SG, SH, SJ o equivalente. Temperaturasai aire libre de determinar la viscosidad dei aceite correcto para el motor. Use la tabla para seleccionar la mejor viscosidad para el rango de temperatura ai aire libre se espera. Figura10 ,, 86 _ _o ..... La gasoiina con hasta un 10% de etanol (gasohoi) o hasta el 15% de MTBE (metil terbutil _ter) es aceptable. Eche gasolina en un a.reabien ventiiada y con ei motor parado. Si el motor ha estado funcionando, deje que se enfrie primero. No eche gasolina a la ma.quinaen ei interior de un edificio donde los vapores de la gasolina suedanestar ex uestos a al una llama o chis a. so 2o 50 _ o C '_'t?'p?:C:_ *'?" 4,10 La gasolina es aitamente inflamable y explosiva y usted puede quemars_ o iesionarse gravementeai reabastecer. Pare el motor y mantenga iejos el calor, las chispas y las llamas. Reabastezcas61oai aire libre. Limpie inmediatamente los derrames. -_22 * Pot debajo de 40 oF (4 oC) el uso de SAE 30 dara.lugar a duros de partida. ** Pot encima de 80 oF (27 o C) el uso de 10W-30 puede provocar un aumento dei consumo de petr61eo.Nivel de aceite con ma.sfrecuencia. 1. Revise el aceite con el motor parado y nivelado. 2. Quite ia tapa del dep6sito de aceite/varilla medidora del nivel de aceite y limpiela. 3. Coioque y ajuste la varilla indicadora. Luego quitela para revisar el nivel de aceite. Vea ia Figura 10. Si el nivel de aceite esta.cerca o pot debajo de la marcade limite bajo de la varilla medidora del nivel de aceite, quite la tapa del dep6sito de aceite/varilia medidoradei nivei de aceite y iBnelo con el aceite recomendado hasta la marca de limite superior. No Ilene de ma.s. 4. 5. Siva a usar ei equipo de forma intermitente o s61oocasionalmente, consulte ia secci6n de Aimacenamiento Fuera de Temporada para obtener ma.sinformaci6nsobre el deterioro del combustible. NOTA: El combustible puede dafiar la pintura y aigunos tipos de plastico. Tenga cuidado de no derramar combustible cuando Ilena el tanque. No use nunca gasolina rancia o contaminada ni mezclas de aceite y gasolina. No permita que entre suciedad o agua en el tanque de combustible. Vuelva a instalar la tapa/varilla medidora del nivel de aceite. Gasolina No utilice gasolinas no aprobados, tales como E85. No mezcle el aceite en ia gasolina o modificar el motor para funcionar con combustibles aiternativos. Esto dafiara,los componentes del motor y anular la garantia del motor. Limpia, fresca, la gasolina sin piomo. • Un minimo de 87 octane/87 AKI (91 RON). Quite ia tapa dei tanque de combustible. Agregue combustible hasta ia parte inferior del iimite de nivel de combustible en ei tubo del tanque. No iiene de ma.s.Limpieel combustible derramado antes de arrancar el motor. 3. 4. Aprieteeltap6n firmemente. Antes de arrancar el motor,aBjese al menos 3 metros del emplazamiento y la fuente de la gasolina. AsegQresede que ninguna persona aparte dei operador permanezca cerca de ia cortadora mientras arranca el motor u opera la misma. Nunca encienda el motor en espacios cerrados o en una zona con poca ventilaci6n. El escape del motor contiene mon6xido de carbono, un gas inodoro y ietai. Mantenga ias manos, los pies, el cabello y la ropa suelta alejados de las partes m6viles del motor y de la cortadora. De combustible debe cumplir estos requisitos: ,, 1. 2. 54 PARA ENCENDER EL MOTOR 1. 2. Col6quese detra.sde la podadora, apriete ia manija de control de la cuchilla y sostengala contra la manija superior. Vea la Figura 11. Este cortacesped tiene dos sistemas iniciales separados, electricos y retroceso. Arrancador el_ctrico: Gire la liave de encendido a ia derecha para arrancar el motor. Sueite la ilave apenas arranque el motor. Arrancador de retroceso: Tome la manijadel arrancadory saque la cuerda lentamentehastaque el motoralcance ei comienzo del ciclo de compresi6n(la cuerda tirara,un poco ma.sfuerte en este punto). Dejeque la cuerdase enrolle lentamente.Tire de lacuerda con un golpe ra.pidoy continuode todo ei brazo. Mantengafirme la manija del arrancador,deje que la cuerda se vuelva a enrollar lentamente. De retracci6n ra.pidadel cord6n de arranque (soborno) tirara,de mano y el brazo hacia el motor ma.sra.pidode Io que puede dejar ir. Las fracturas de huesos, fracturas, contusiones o esguinces podria resultar. PARA DETENER 1. EL MOTOR Suelte la manija de control de la cuchilla para detener el motor y la cuchilla. USO COMO ABONADORA Espere a que la cuchilla se haya detenido pot completo antes de hacer cualquier trabajo en la cortadora o de retirar el colector de cesped. USO DE LA CORTADORA Para abonar ei cesped, quite ei colector de cesped o el canal de descarga lateral de ia ma.quina,y acople la tolva de abono. Para un abono eficiente, no corte cesped humedo. Si el cesped ha crecido ma.sde 10,2cm. (4 pulg.) no se recomienda el uso de la podadora como abonadora. En ese caso, use ei colector de cesped para embolsar los recortes. DE CESPED Aseguresede que ei cesped esta.libre de piedras,palos, cables u otros objetos que pudiesendafiar la cortadorao el motor.Dichos objetos pueden set arrojadosaccidentalmentepot la cortadora en cualquier direcci6ny _rovocarlesionespersonales graves ai operadory a otras personas. USO DEL COLECTOR AI operar una cortadora de cesped es posible que objetos extrafios sean arrojados a los ojos, Io cual puede dafiarlos gravemente. Utilice siempre galas de seguridad durante la operaci6n de la cortadora de cesped o mientras la ajusta o repara. 1. Unavez que el motorest_ funcionando,aprieteel controlde transmisi6ncontra la manijasuperiorpara propulsarla podadora. Libereel controlde transmisi6npara desengranarel sistemade transmisi6n. 2. Usarlapalancadecambiosparaseleccionar la velocidad deavancede la cortadora decesped- 1 eslavelocidadm_sbaja,6 eselm&sr&pido. Cuandolaselecci6n de cambiodevelocidad, suelteel controlde la unidad. IMPORTANTE:Moverla palancade cambioss61ocuandoel motor est,. funcionando.Cambiode la palancade cambiosde configuraci6n conel motorapagadopuedendaSarla m_.quina. 55 DE CE_SPED Puede utilizar el colector de cesped para recoger dichos recortes mientras opera la podadora. 1. Acople el colector de cesped siguiendo las instrucciones de la secci6n de Montaje. Los recortes de cesped son recolectados en la bolsa de forma automatica a medida que pasa ia cortadora. 2. Opere ia cortadora hasta que ia bolsa colectora este iiena. 3. Detengaei motor pot completo soltando la manija de control de la cuchiiia. Compruebe que ia unidad se hayadetenido por completo. 4. Mientras sostenga la boisa colectora de pasto pot medio de la manija trasera y la manija inferior, levante la bolsa colectora para sacarla dei adaptador.La puerta del canal movera,la cuerda fuera del camino de la bolsa. 5. Continue sosteniendo ia manija inferior,eleve ia parte posterior de la bolsa colectora, y liberan el manija inferior sobre un recepta.culo apropiado. La boisa colectora se abrira,y los recortes de cesped se dispersara.n.AI volver a colocar la bolsa de cesped, asegurese de que la parte superior de la bolsa se apoye sobre el sosten del cable entre las manijas. Si golpea un objeto extrafio, detenga ei motor. Retire el cable de ia bujia, inspeccione detenidamente la cortadora para vet que no tenga dafios, y repare el dafio antes de volver a encender y operar. El exceso de vibraci6n de la cortadora durante la operaci6n es una indicaci6n de dafio. Se debe inspeccionar y reparar la unidad Io antes posible. PROGRAMA DE iVlANTENllVllENTO Antesde realizarcuaiquiertipo de mantenimientoo servicio,desenganche todos loscontrolesy detengael motor.Esperea que sedetengancompletamentetodas laspiezas m6viles.Desconecteelcable de labujia y p6ngalo haciendomasacontrael motorpara evitarque se enciendaaccidentaimente. Cada uso Siga el cronograma de mantenimientoque se presenta a continuaci6n. Esta tabla s61odescribe pautas de servicio. Utiiice ia columna Registro de Servicio para hacer ei seguimiento de las tareas de mantenimiento completadas. Para ubicar el Centro de Servieio Sears m_s cercano o para programar un servieio, simplemente comun/quese con Sears al tel_fono 1-800-4-MY-HOME®. 1. Nivel de aceite dei motor 1. Verificar 2. Piezassueltasofaltantes 2. Ajustaroreemplazar 3. Unidad y motor 3. Limpie lras 5 horas 1. Aceitedei motor 1. Cambiar Anuaimente o 50 horas 1. 2. Depurador de aire y Pre-filtro (De Set equipado)t Varillajes/pivotes de control y ruedas 1. Limpiaro reemplazar 3. 2. 3. Lubricarcon aceiteligero Limpie 4. La parte inferior de la plataforma de la cortadora de cesped Aceitedei motor 4, Cambiar Anuaimente o 200 horas 1. Depuradordeairey Pre-filtrot 1. Reemplazar Anuaimente 1. Bujiadeencendido 1. Reemplazar Antes de aimacenar 1. Sistema de combustible 1. Hacerfuncionar el motor hasta que se detenga pot falta de combustible o ahadir estabilizador de un tanque Ileno de combustible nuevo antes de su aimacenamiento. Limpiorn_.sa menudoen condicionespolvorientaso cuandolos escombrosaerotransportadosest_.npresentes. 56 f Detengasiempreel motor,desconecteel cablede la bujfay hagamasa contrael motorantesde reaiizarcuaiquiertareade mantenimiento a su mfiquina. RECOMENDACIONES • Respetesiemprelasreglasde seguridadcuandorealicetareasde mantenimiento. • La garanfiadeestacortadoranocubreelementosquehan estadosujetosal malusoo la negligenciadeloperador.Para recibirel reembolsototalde la garantia,ei operadordeberfidar mantenimiento ai equipotai y comoseindicaen estemanual. El cambiode la velocidadcontroladadel motorinvalidarfila garantia dei motor. • • • ---_ _ 0.020 in. (.51 ram} TodoslosajustesdebenserverificadospotIo menosunavez en cadaestaci6n. Reviseperi6dicamente todoslossujetadoresy compruebequeesten bienajustados. MANTENIMIENTO J DEL MOTOR Figura12 Bujia de encendido Paraunbuenfuncionamiento, la bujfadebeestaradecuadamente abierta y librede dep6sitos.Reemplacela bujiaanualmente. 1. Desconecteel capuch6nde la bujiay retirecualquiersuciedaddel fireadeesta. 2. Porcelana Electrodo GENERALES Cierre Usela Ilavede bujiasdel tama_oadecuadoparaextraerla. NOTA:Reemplazarcon una Champion®RC12YCbujia. 3. 4. 5. Compruebeel entrehierroconun calibradorde alambre.La separaci6ncorrectaes 0,020in.(0,51mm).Vea [aFigura12.Si es necesario,reajusteel entrehierro. Instaiey apriete[abujiaa[ parde aprieterecomendado.Parael ajustedel entrehierroo el parde apriete,consultela secci6nde Especificaciones. Coloqueel capuch6nde la bujia. 4:-- Filtro de aire Filtro de Aire Un filtrode aire sucio restringir&el fiujo de aire al carburadory causar& el funcionamientodefectuosodel motor.Inspeccioneel filtro cada vez que opereel motor.Necesitar_. limpiarcon m_.sfrecuenciael filtro si ustedopera el motoren fireas muy poivorientas. Limpioel fiitro de aire cada50 horasde [aoperaci6no unavez por temporada.Reemplace e[ fiitro de aire anualmente. Figura13 Nuncaarranqueu opere el motorsi removi6el conjuntodel filtro de aire o el filtro de aire. 2. NOTA:Nouse aire a presi6nni solventespara limpiarel filtro.El aire a presi6npuededaSarel filtro y los solventespuedendisolverlo. 1. Quitarel cierrey la cubiertadel filtro de aire.Vea Figura13. Lavarel pre-limpiadorde detergenteliquidoy agua y deje que el aire seooa rondo.No de petr61eode la pre-limpia. 3. 4. 6. 1. 5. Montarel pre tintoreriaal filtro. Instalarel filtro y pre-limpiadoren la base.AsegOresede filtro encajade forma seguraen la base. Instalarfiltro de aire y seguroconel sujetador.AsegOresede que el sujetadorest,. apretado. Quiteel prefiltro(De Ser equipado)y filtro. Paraaflojarlos desechos,golpearsuavementeel filtro en una superficiedura.Si el filtro est,. muy sucio,reemplacecon un nuevofiltro. 57 Comprobar el aceite del motor Comprobar el nivel de aceite antes de cada operaci6n. Aseg_resede que el nivei de aceite se mantiene. 1. 2. Revise el aceite con ei motor parade y nivelado. Quite ia tapa del dep6sito de aceite/varilla medidora del nivel de aceite y limpiela. 3. Coloque y ajuste la varilla indicadora. Luego quitela para revisar el nivel de aceite. 4. Si el nivel de aceite esta.cerca o pot debajo de la marcade limite bajo de la varilla medidora del nivel de aceite, quite la tapa del dep6sito de aceite/varilia medidoradei nivei de aceite y ilenelo con el aceite recomendado hasta la marca de limite superior. No Ilene de ma.s. 5. Tap6n de aceite/variJJa de rnedici6n del niveJ de aceite FiJtro de aire Vueiva a instalar ia tapa/variiia medidora del nivei de aceite. Cambiar el aceite del motor SiJenciador La gasolina y sus vapores son extrernadarnente inflarnables y J explosivos. Un incendio o una explosi6n pueden causar graves Figura 14 quernaduras o a rnuerte. Carnbieel aceite del motordespu6sde las prirnerascinco horasde operaci6n,y cadacincuentahoraso una vez a la ternporadadespu6s. Si drenael aceitedesdeel tubosuperiorde Ilenadode aceite,el tanquede combustibledebeestar vacio o de Io contrariopodria presentarseuna fugade combustibleque podriaocasionarun incendioo una explosi6n.Paradesocuparel tanquede combustible, opereel motorhastaque se detengapor la falta de combustible. 1. Con el motor apagado pero a[3ncaliente, desconecte el cable de la bujfa y rnant6ngalo a distancia de la bujia. 2. Coloque un recipiente adecuado cerca del motor para recoger el aceite usado. 3. Quite la tapa/varilla medidora del nivel de aceite y drene el aceite al recipiente inclinando el motor hacia el tube de Ilenadodel aceite. Vea la Figura 14. 4. Con ei motor en una posici6n nivelada, Ilene hasta ia marca de limite are en la varilla medidora del nivel de aceite con el aceite recomendado. Poneren rnarchael motorcon un nivelde aceitebajo puedecausar daSosen el motor. 5. Vueiva a instaiar bien la tapa/varilla medidora del nivel de aceite. Limpie el motor Diariamente o antes de cada use, limpie el cesped, la grasa o los residues acumulados del motor. Mantenga limpios el varillaje, los resortes y los controles. Mantenga ei a.reaque rodea al silenciador y detra.sdei mismo iibre de cualquier residue combustible. El mantenimientodel motor en condiciones limpias permite el movimiento de aire airededor del mismo. Las partes dei motor se @ben mantener limpias para reducir el riesgo de sobrecalentamiento y combusti6n de los residues acumulados. El aceite usadoes un residuo peligroso.Elimineel aceite usado adecuadamente.No Io arroje juntocon los residuesdomiciliarios.CensuRe alas autoridades locales o al centrede servicio Sears para averiguar d6nde hay instalacionespara la eliminaci6n/reciclaje segura(o)del aceite usado. 58 No use agua para limpiar ias piezas dei motor. El agua puede contaminar el sistema de combustible. Use un cepillo o un trapo seco. LUBRICACION Control f de la cuchilla Lubrique con aceite ligero los puntos de pivote del control de la cuchilla al menos una vez cada estaci6n. Este controle debe funcionar libremente en ambas direcciones. Vea la Figura 15. Ruedas y rueditas Lubrique ias ruedas y rueditas una vez pot temporada con aceite iigero (o aceite para motor). Sin embargo, si las ruedas se quitan pot cualquier raz6n, debe lubricar la superficie del perno del eje y la superficie interna de la rueda con aceite iigero. Vea la Figura 15. Adaptador de colector de pasto Lubrique el resorte de torsi6n y ei punto de pivote en cada extremo de la puerta del adaptador de colector de pasto pot io menos una vez pot temporada con aceite ligero para evitar que se oxide. Vea la Figura 16. Transmisi6n La transmisi6n es prelubricada y sellada en la fa.bricay no requiere lubricaci6n. LIMPIEZA DE LA PLATAFORMA _J Figura15 Debe limpiar la parte inferior de la plataforma de la cortadora de cesped una vez una temporada para prevenir la acumulaci6n de recortes de cesped u otros desechos. Siga los pasosque aparecen debajo para reaiizar esta tarea. 1. Desconecteel cable de la bujia. Drene la gasolina de lacortadora o coloque un trozo de pla.sticodebajo del tap6n de Ilenado del combustible. 2. incline la cortadora de cesped de modo que quede apoyada sobre al alojamiento, mantenga el silenciador de costado hacia abajo. Sostenga firmemente la cortadora. Nunca incline ia cortadora de cesped ma.sde 900en ninguna direcci6n y no deje la unidad inclinada. Se puede filtrar aceite dentro de la parte superior del motor y causar problemas de arranque. 3. Raspe y iimpie ia parte inferior de la plataforma mediante el uso de una herramienta adecuada. No la rode con agua. IMPORTANTE: No utilice una lavadora a presi6n o manguera de jardin para limpiar su unidad. Pueden producir daSosa los rodamientos o al motor. El uso de agua acortara,la vida Qtilde la ma.quinay reducira,su capacidad de servicio. 4. Vuelva a colocar ia cortadora de cesped sobre sus ruedas en el suelo. Si puso un pla.sticodebajo del tap6n de Ilenado de combustible aseguresede sacarlo en este momento. Figura16 CAIVIBIO DE LA ALETA TRASERA Para cambiar la aleta trasera, proceda de la siguiente manera: 1. Para quitar la tapa trasera, levante la puerta trasera, quite el tornillo, y la tapa de prensa en a arnbos lados para quitar del agujero. Vet la Figura 16. 2. Quite el tornillo y la tapa del agujero de enfrente y sustituya por la nueva tapa en la orden de enfrente y la rnanera del retiro. 59 AJUSTE DEL CABLE CAiVIBIOS DE LA PALANCA DE Puede set necesario reaiizar un ajuste peri6dico del cable de cambios de seis velocidades debido al desgaste normal del cable. El ajuste es necesario si las seis velocidades no funcionan bien. La mensula ajustable del cable se iocaliza sobre el lado izquierdo de la cortadora de cesped junto al motor. Vea la Figura 18. 1. 2. 3. Ponga en marcha el motor y coloque la palanca de cambios en la posici6n de sexta velocidad. Detenga ei motor y desconecte el cable de la bujia y conectelo a tierra contra el motor. 4. Afloje la tuerca hexagonal que sujeta la mensula ajustable del cable. Vea ia Figura 18. Empuje hacia atra.sla mensulaajustable del cable. 5. Ajustelatuerca hexagonal. CUIDADO DE LA CUCHILLA J Figura 17 sostener la cuchilla. Inspeccione peri6dicamente el adaptador de la cuchiiia en busca de rajaduras, especialmente cuando golpee un objeto extra_o. Realice los reemplazos que resulten necesarios. Siga los pasos que aparecen debajo para reaiizar el mantenimiento de la cuchilla. 1. Desconecte el capuch6n del cable de la bujia. Gire la cortadora de cesped sobre ei costado y compruebe que el filtro de aire y el carburador queden mirando hacia arriba. 2. 3. Saque el perno y el soporte de campana de ia cuchiiia que sostienen la cuchilla y el adaptador de la misma al cigQe_aidel motor. Vea la Figura 18. Saque la cuchilla y el adaptador del cigQe_ai. Adaptadc la Mism NOTA: Quitando estos articulos, la arandela tambien pueden iiberarse de el cigQefial.Este seguro para hacer la nota de laorientaci6n de este articulo para nueva sesi6n. 4. Saque ia cuchilia del adaptador para comprobar el equilibrio. Balancee la cuchilla sobre un destornillador de eje redondo para inspeccionarla. Saque metal dei iado pesado hasta que quede bien equilibrada. Cuando afile la cuchilla, siga el a.ngulooriginal de la muela como guia. Afile cada horde de corte pot igual para mantener el balance de la cuchilla. J Figura18 6. I rote _ortadora [y se puede romper, causando asi lesiones personales. de cesped I Lubrique el cigQehaidei motor y ia superficie interna del adaptador de ia cuchilla con aceite iigero. Desliceel adaptador de la cuchilla sobre el cigQefialdel motor. Instale ia cuchiiia en ei adaptador con el lado marcado "Bottom" (inferior) (o con el numero de parte) hacia ei piso cuando ia cortadora de cesped esta.en posici6n de funcionamiento.AsegQreseque la cuchilla quede aiineaday asentada en las bridas del adaptador. 7. Coloque ei soporte de campana de la cuchilla en ia misma. Aiinee las muescas del soporte de campana de la cuchilla con los orificios peque_os de la cuchilla. Vuelva a colocar el pemo hexagonal y ajQstelosegQnlos siguientes valores de torsi6n: 450 Ib-pulgcomo minimo, 600 Ib-pulg como ma.ximo. Para garantizar ia operaci6n segura de la cortadora de cesped, revise peri6dicamente el perno de la cuchilla para determinarsiesta, bien ajustado. CUIDADO DE LA CORREA NOTA: Para cambiar la correa de paseo de la cortadora de cesped es necesario extraer varios componentes. Solicite a un centro autorizado de servicio Sears que realice el reemplazo de la correa. 6O CAIVIBIODE LA BATERiA f Las bateriascontienen_.cidosulfOricoque puedecausarquemaduras. No pongaen corto circuitoni mufflelas bateriasde ninguna manera.Nocoloquelasbateriassobrefuegodado que pueden explotaro emitir materialest6xicos. 1. 2. 3. Afloje las perillas en estrella que sujetan las manijas inferior y superior y con cuidado doble la manija superior hacia la manija inferior tai come se muestra en la Figura 19. Retire los dos tornillos que sujetan ia cubierta de ia bateria ai alojamiento de la bateria y col6quelos al costado. Vea la Figura 19. Abra ia cubierta de ia bateria, extraiga los conductores positive y negative de la bateria, saque la bateria y coloque una nueva. Conecte el conductor positive ai lade positive del paquete de bateria, luego conecte el lade negative. _J Figura 19 NOTA: La bateria que tiene puede diferir ligeramente de la que se muestra en la Figura 19. Consulte la lista de piezas. IMPORTANTE: Cuando cambie el paquete de bateria en ei panel de la manija, el paquete de bateria debe colocarse con el terminal positive hacia el lade izquierdo y ei terminal negative hacia el lade derecho dei panel (el terminal positive estfi mils cerca de la Ilave de contacto). Vea la Figura 20. El cambio incorrecto del paquete de bateria causa daSos graves. 4. Vueiva a instalar ia cubierta dei alojamiento de ia bateria y fijela con los dos tornillos que sac6 antes, asegurfindose de colocar a presi6n el conducto de alambre a la izquierda en su lugar en el alojamiento. 5. Doble las manijas hacia arriba y apriete la perillas en estrella. + Terminal positivo m Terminal negativo Noquite el paquetede bateriasdel alojamientodel arrancador el_ctricopor ningunaraz6nque no seael reemplazo. Carga de la bateria J Figura20 f La bateriacontienefluido corrosivoy materialt6xico; sedebe manipularcon cuidadoy mantenera los ni_osalejados.No perfore, desensamble,muffleo prendafuegoa la bateria.Durantela carga o descargase podrianemitir gasesexplosivos.Utilicelaen un _.rea bienventilada,lejosde fuentesde ignici6n. NOTA: La clavija de conexi6n especialmente dise_ada del cargador Qnicamenteencaja en la caja de las baterias. 1. Enchufe el cargador de ia bateria dentro del orificio en la parte inferior del alojamiento de la bateria. Vea la Figura 21. 2. Inserte el enchufe del cargador de baterias en un tomacorriente residenciai comQnde 120voitios. Cargue ia bateria de 8 a 10 horas antes de usar ia unidad per primera vez. Si no io hace se puede reducir ia duraci6n de ia bateria. No cargue pot mils de 12 horas, La bateria Qnicamentenecesitarfi cargarse en el ajuste iniciai y luego de periodos prolongados sin uso. 3. Despues de cargar, primero desconecte el enchufe del tomacorriente, luego desconecte el conductor del cargador de la bateria. J Figura 21 61 IMPORTANTE: Siempre conecte elconductor delcargador endel paquete debaterias enprimer lugar, yluego inserte elenchufe del cargador debaterias enuntomacorriente residencial esta.ndar de120 voltios. Siga estasecuencia siempre quecargue labateria. UtiliceQnicarnente el cargadorde bateriassurninistradoconesta cortadorade c_sped. Cambio del fusible El circuito del arrancador electrico y la bateria esta.nprotegidos pot un fusible de 40 amperes. Si ei fusible se quema, el arrancador electrico no funcionar& Si ia unidad no se enciende con ei arrancador electrico, siga los siguientes pasos para verificar el fusible que esta.en el alojamiento de la bateria: 1. Abra ia cubierta de ia bateria segQnse muestra en Cambio de bateria. Vea ia Figura 19. 2. Retire el fusible del enchufe e inspeccione tal como se muestra en ia Figura 22. Si esta.quemado, reemplace por un fusible de autom6viles esta.ndarde 40 amperes. 3. J Figura 22 Coloque con cuidado los cables dentro del alojamiento, cierre la tapa de la bateria y doble la manija superior nuevamenteen su lugar. NOTA: El motor puede ponerse en marcha manualmente si el fusible se quema. 62 Nunca almacene la cortadora de cesped con combustible en el tanque en un espacio cerrado o en a.reascon poca ventilaci6n, donde los gases dei combustible puedan alcanzar el fuego, chispas o una luz piloto como ia que tienen algunos homos, calentadores de agua, secadores de ropa o aigOnotto dispositivo a gas. PREPARACI6N DEL MOTOR PREPARACION CO'SPED Ya que los motoresalmacenaronm_.sde 30 dfas: 1. Paraimpedira la gomaformarseen el sistemade combustible o en partesde carburador,dirijasel motorhastaque esto se parea falta del combustibleo a_adirun aditivode gasolinaal gasen el tanque.Si usted usaun aditivode gas, dirige el motor durantevariosminutospara poneren circulaci6nel aditivo porel carburador-- despu_sque el motory el combustiblepuedenser almacenadoshasta 24 meses. 2. 3. DE LA CORTADORA DE Limpie y iubrique la cortadora como se describe en las instrucciones de lubricaci6n. Mientrasel motores todavfacaliente,cambioel petr61eo. Limpieel motorde escombrossuperficiales. • No utilice una lavadora a presi6n ni una manguera de jardfn para limpiar su unidad. Cubra la cuchilla de la cortadora con grasa para chasis para impedir la oxidaci6n. • Refierasea la PREPARACIONDEL MOTOR para instrucciones de almacenaje de motor correctas. • Almacene la unidad en una zona limpia y seca. No la almacene cerca de materiales corrosivos como pot ejemplo fertilizantes. Cuando almacene cuaiquier tipo de equipo motorizadoen un gaip6n de dep6sito met_.iicoo con poca ventilaci6n, tenga especial cuidado de realizarle un tratamiento antioxidante al equipo. Use aceite ligero o silicona para recubrir ei equipo, especialmente los cables y partes m6viles de su cortadora antes de aimacenarla. Bateria La baterfa debe guardarse con carga completa. El aimacenamiento prolongado de una baterfa descargada reducira,la vida Otily la capacidad de la baterfa. 63 hayanvenidoa una paradacompleta.Desconecteel alambrede bujfay b_.selocontrael motorpara prevenirel comienzoinvolunSiempreIlevepuestoscristales inastillablesdurantela operaciOno realizandocualquierajusteo reparaciones. El motor no arranca 1. Control de ia cuchilla desenganchado. 1. Engraneel control de ia cuchiila. 2. 3. Se ha desconectado el capuchOnde la bujia. El depOsitode combustible esta.vacio o el combustible se ha echado a perder. 2. 3. Conecte el cable al capuchOnde la bujia. Llene el tanque con gasolina limpia y nueva. 4. 5. La bujia nofuncionacorrectamente. El motorsedesbord6. 4. 5. Limpie, ajuste la separaciOn,o cambie la bujia. Esperar unos minutos parareactivarse. 6. 7. Linea de combustible bloqueada. Fusiblequemado. (Arranqueel@trico Qnicamente) 6. 7. Contacte con su centro de partes y reparaciones Sears. Reemplace el fusible (vea la secciOnServicio). 1. 2. El capuchOnde la bujia esta.flojo. El combustible se ha echado a perder. 1. 2. Conecte y ajuste el capuchOnde la bujia. Llene el tanque con gasolina limpia y nueva. 3. La ventilaciOnde la tapa del combustible esta. obstruida. 3. DestapelaventilaciOn. 4. Agua o suciedad en el sistema del combustible. 4. 5. El fiitro de aire esta.sucio. 5. Vacie ei tanque de combustible. Carguecombustible nuevo en el dep6sito. Consulte ia secci6n Mantenimientodel manual. 6. Linea de combustible bloqueada. 6. Contacte con su centro de partes y reparaciones Sears. El motor recalienta 1. 2. El nivel de aceite del motor esta.bajo Flujodeairerestringido 1. 2. Llene el motor con ia cantidad y tipo de aceite adecuado. Limpie los residuos de alrededor de las aietas de refrigeraci6n del motor y del alojamiento del soplador. El motor vacila a altas revoluciones 1. Poca separaciOnde los electrodos de la bujia 1. Ajuste la separaci6n a .020". El motor funciona real en marcha ienta 1. 2. Bujia atorada,averiada o exceso de separaciOn. Ei fiitro de aire esta.sucio 1. 2. Limpie, reemplace o reajuste la separaciOna .020". Consulte ia secciOn Mantenimientodei manual. Demasiada vibraciOn 1. 2. Cuchilla de corte floja o descentrada. Cuchillaabollada. 1. 2. Apriete la cuchilla y el adaptador Baiancee la cuchilla. Cambielacuchilla. La cortadora de cesped no regresa el recorte de cesped como abono 1. Cesped hQmedo. 1. No corte el cesped cuando este mojado, espere hasta que sea ma.starde para hacerlo. 2. Cesped demasiadoalto. 2. 3. La cuchiiia de ia cortadora no esta.afiiada. 3. Corte una vez a aitura de corte elevada, iuego vueiva a cortar a ia altura deseada o haga un sendero de corte mas angosto. Afile o cambie la cuchilla. Corte desiguai 1. La cuchiiia de ia cortadora no esta.afiiada. 1. Afiie o cambie ia cuchiiia. La cortadora no avanza pot si misma 1. Correa maiinstaiada. 1. 2. Haydesechos bloqueando el funcionamiento de la transmisi6n. 2. Compruebe ia correa para vet si ia polea esta.bien instaiada y se mueve correctamente. Detengael motor, desconecte el capuch6n de la bujia y limpie los desechos. 3. Correadafiadaodesgastada. 3. El motor funciona de manera erra.tica Comuniquesecon ei centro de servicio Sears. z:NECESITA MAS AYUDA? Inc(n_r::_r - En Ifnea I_._rep_e_ynl podr,_ encontrar Sus preguntas Obtenga Encuentre senmanagerny.com es_e manual ser_in respondidas pot nuestro un plan de mantenimiento informaci6n B_o&_ght y herramien_as to yo_l y los rnanuales equipo personalizado 64 los o_ros productos que posea de espedalistas para su hogar clue Io ayudaran by Seas isincargo! de todos con los proyectos de su hogar (Esta p_.ginase aplica s61oen EE.UU. y Canada.). Sears, Roebuck and Co., U.S.A. (Sears), el Consejo de Recursos Arnbientales de California (CARB) y la Agencia de Protecci6n Arnbiental de los Estados Unidos (EPA) Declaraci6n de garantia del sistema de control de emisiones (derechos y obligaciones de la garantia de defectos del propi= etario) LA COBERTURADE LA GARANTJADE CONTROLDE EMISIONESES Y PARALOSMODELOSCERTIFICADOSDELANO 1997Y POSTERIORES, APLIOABLEA LOS MOTORESCERTIFICADOSCOMPRADOSEN CALIFOR- QUESE COMPRENY UTILICENEN CUALQUIERPARTEDE LOS ESTADOS NIA EN 1995Y POSTERIORMENTE, QUESE UTILIZANENCALIFORNIA, UNIDOS(Y A PARTIRDEL 1 DE ENERODE 2001 EN CANADA). Declaraci6n de garanfia sobre defectos en el control de ernisiones para California y los Estados Unidos El Consejode RecursosAmbientalesde California(CARB),la EPA(Agencia iones de su motorpara losperiodosde tiempo enumeradosa continuaci6n, de Protecci6nAmbientalde los EE.UU.)y Searstienenel gusto de explicarla siemprequeno hayaabuso,negligenciao mantenimientoindebidode su garantiadel sistemade control de emisionespara motoresdela_o 2000y para motortodoterrenopeque_o.Su sistemade controlde emisionespuedeincluir elfuturo con relaci6na motorespeque_ostodo terreno(SORE).En California, piezastales comoel carburador,el filtro de aire, elsistemade encendido,el los nuevosmotorespeque_ostodo terrenodebenestar dise_ados,construidos silenciadory el conversorcatalitico.Tambienpuedeincluirconectoresy otras unidadesrelacionadascon lasemisiones.Dondeexistaunacondici6ncubierta y equipadosparacumplircon las rigurosasnormasanti-smogdelestado.En el restode los EstadosUnidos,losmotoresnuevostodoterrenode encendido por la garantia,Searsreparar_su peque6omotortodo terrenosin costo alguno porchispa certificadosparael a_o 1997debencumplirest_ndaressimilares incluyendodiagn6stico,piezasy manode obra establecidospot la EPA.Sears debegarantizarel sistemade control de emisCobertura de la garantJa Sears para defectos en el control de ernJsiones Los motorestodo terrenopeque6osest_ngarantizadosen Io relativoalcontrol alas disposicionesque se indiquena continuaci6n.Si una partede su motor de emisionesparadefectosen piezasdurante un per[odode dos a_os,sujeto cubiertapot lagaranfiaes defectuosa,Sears reparar_o sustituir_dicha parte. Responsabilidades del propietario en relacibn con la garantia Comopropietariodel motortodo terrenopeque_o,Ud.es responsablede la a modificacionesno aprobadas.Ud.es responsablede presentarsu motor realizaci6ndel mantenimientorequeridoquese incluyeen las instrucciones todoterrenopeque6oa un distribuidorde serviciosSearsautorizadotan pronto de operaci6ny mantenimiento.Searsrecomiendaquese conserventodoslos comoaparezcaun problema.Las reparacionesde la garantiasinconflicto recibosrelativosal mantenimientode su motortodoterrenopeque_o,pero debencompletarseen un plazode tiempo razonable,no superiora 30 dias.Si no pude denegarla garantiasimplementepor la faltade los mismos,o por su tienealguna preguntarespectoa sus derechosy responsabilidadesreferenincumplimientodel mantenimientoprogramatic.Comopropietariodel motor tes a la garantia,debe contactarcon un representantede serviciosSearsal peque_otodoterrenodebe saberque, sinembargo,Sears lepuedenegar 1--800--469--4663. La garantiade emisioneses unagarantiapor defectos.Los lacoberturade lagarantiasi su motortodoterrenopeque6oouna piezadel defectosse juzgande acuerdocon elfuncionamientonormalde un motor.La mismohanfalladodebido a abuso,negligencia,mantenimientoindebidoo garantiano est_ relacionadacon unapruebade emisionesen uso. Disposiciones de la garantJa Sears para defectos en el control de emJsiones Las siguientesson disposicionesespecificasrelacionadascon la coberturade lagarantia paradefectosen el controlde emisiones.Esun a_adidoa lagarantiade motorSearspara motoresno reguladosque seencuentraen lasinstruccionesde funcionamientoy mantenimiento. 1. Piezascon garantia sin cargo alguno parael poseedor,incluyendotareasde diagn6sticoque permitan determinarsi una partecon garantiaes defectuosa,siempreque La coberturade esta garantiase extiendeL]nicamentealas piezas dicho diagn6sticose realiceen un distribuidor de servicios Searsautorizaqueaparecena continuaci6n(las partesde lossistemasde control de do. Parael servicio de lagarantia de emisiones,contacteal distribuidorde emisiones),siempreque dichas piezasestuvieranya en el motoren el servicios Searsautorizadom_s cercanoincluidoen las"P_ginasamarillas" momentode su compra. a. Sistemade medici6n de combustible en lascategorias"Motores,gasolina","Motoresde gasolina","Podadoras de cesped",o similares. • Sistema de enriquecimientopara arranqueen frio 4. Reclamacionesy exclusionesa la cobertura • Carburadory partesinternas Las reclamacionesde lagarantia debenenviarsede acuerdocon las • Bombade combustible disposicionesde la politica de garantia para motoresSears. La cobertura b. Sistemade inducci6nde aire de lagarantia excluir_defectosen piezascon garantia queno scan partes • Filtrode aire originalesSears,o abuso,negligenciao mantenimientoincorrecto,tal y • Colector de admisi6n como se estableceen lapolitica de garantia para motoresSears.Sears no c. Sistemadeencendido es responsablede lasfallas en piezas con garantia provocadaspor el uso • Bujia(s) de encendido de partesa_adidas,que no scan originaleso quese hayan modificado. • Sistema de encendidomagneto 5. Mantenimiento d. Sistemadelcatalizador Cualquierpartecon garantiaque no este programadapara ser reem• Convertidorcatalitico plazada comomantenimientorequerido,o que s61odebainspeccionarse • Colector de escape regularmentealefecto de "inspeccioneo reemplacesegL]nsea necesario", • Sistema de inyecci6nde aireo v_lvulade impulsos estar_garantizadacontradefectosduranteel periodode la garantia.Todas e. Elementosvariadosusadosen los sistemasanteriores las piezasgarantizadasqueesten programadaspara su reemplazopara • Wlvulas de vacio,sensiblesa temperatura,posici6ny tiempo cumplir con los requisitosde mantenimientoestar_ngarantizadass61o e interruptores por el periodoanterior al primerreemplazoprogramaticparadicha pieza. • Conectoresy montajes Cualquierpiezade recambioquesea equivalenteen funcionamientoy 2. AIcancede la cobertura durabilidadpuedeusarse para realizarmantenimientoo reparaciones.El propietarioes responsablede realizartodoel mantenimientorequerido,tal Searsgarantizaal poseedorinicialy a loscompradoressubsiguientes y comose define en las instruccionesde funcionamientoy mantenimiento quelas piezas con garantiano tendr_n defectosen materialesni mano Sears de obra que provoquenla falla de las mismasduranteun periodode 6. Coberturaindirecta dos aSosa partirde la fechaen queel motorse entregaa un comprador particular. Porla presente,la coberturase extiendea la falla de cualquiercomponente de motorprovocadapot lafalla de unapieza con garantiaque este todavia 3. Sin cargo en periodode garantia. La reparaci6no reemplazode cualquierpartecon garantia se realizar_ En los EstadosUnidosy Canad_hay unalinea de atenci6nde 24 horas,1-800-469--4GG3, quecuentacon un menL]con mensajespre-grabadosque contienen informaci6npara el mantenimientode motores. Busque el periodo de duraci6n de emisiones importantes yla informaci6n la etiqueta de emisiones de su motor de clasificaci6n de aire en Los motores cuyo cumpiimiento con los estAndares de emisi6n Tier 2 de la Comisi6n de Recursos Ambientales de California (CARB) est6 certificado deben exhibir la informaci6n relacionada con el perJodo de duraci6n de las emisiones y la clasificaci6n de aire. Sears, Roebuck and Co., de los Estados Unidos ponen esta informaci6n a disposici6n deJ consumidor en nuestras etiquetas de emisiones. El Periodo de Duraci6n de las Emisiones describe el nQmero de horas de tiempo real de funcionamiento para el cual se certifica que el motor cumple con las reglas de emisi6n, descontando el mantenimiento adecuado deJ mismo segQn las instrucciones de operaci6n y mantenimiento. Se utilizan las siguientes categorias: Moderado:Se certifica que el motor cumpie con las reglas de emisi6n durante 125 horas de tiempo real de funcionamiento deJ motor. Inmediato:Se certifica que el motor cumple con las reglas de emisi6n durante 250 horas de tiempo real de funcionamiento deJ motor. Extendido:Se certifica que el motor cumple con las reglas de emisi6n durante 500 horas de tiempo real de funcionamiento deJ motor. Por ejemplo, una cortadora de c6sped tJpica que se empuja desde atrAs se usa entre 20 y 25 horas por afio. Por Io tanto, el Periodo de Duraci6n de Emisiones de un motor con una clasificaci6n intermedia seria equivalente a entre 10 y 12 afios. Laclasificaci6n de aJre es un nQmero calculado para describir eJnivel reiativo de emisiones para un grupo de motores en particular. Cuanto menor sea Jaclasificaci6n de aire, mayor es JaJimpieza deJ motor. La informaci6n se presenta de forma gr&fica en Jaetiqueta de emisiones. Despu_s del 1 de julio de 2000, busque el periodo de cumplimiento de las reglas de emisiones en la etiqueta de cumplimiento de las reglas de emisiones del motor Despu_s deJ 1 de julio de 2000 se certificar_, que determinados motores Sears, Roebuck and Co., de los Estados Unidos cumpien con los estAndares de emisiones de la fase 2 de la Agencia de Protecci6n Ambiental de los Estados Unidos (USEPA). Para los motores certificados para la etapa 2, el periodo de cumpiimiento con las reglas de emisiones al cual se hace referencia en la etiqueta de cumpiimiento con las reglas de emisiones indica el nQmero de horas de funcionamiento para el cuaJ se ha demostrado que el motor cumpie con los requerimientos federales de emisi6n. Para los motores con desplazamiento inferior a 225 cc, Categoria Para los motores con desplazamiento de 225 cc o mAs, Categoria El despiazamiento de los motores C = 125 horas, B = 250 horas y A = 500 horas. C = 250 horas, B = 500 horas y A = 1000 horas. de la serie modelo 150112 es 249 cc. La presente es una representaci6n gen_rica de la etiqueta de emisi6n que se encuentra generaimente en un motor certificado. FAMILY YBSXS.3192VA 274812 GDOC-100182Rev.A 66 Felicitacionespor haberrealizadouna adquisici6ninteligente.El productoCraftsman@que ha adquiridoest_ dise_adoy fabricado para brindarrnuchosa_osde funcionarnientoconfiable.Perocorno todoslos productosa vecespuederequerirde reparaciones.Esen esernornentocuandoel disponerde un Acuerdode protecci6npara reparacionesle puedeahorrardineroy problernas. A continuaci6nsedetallanlos puntosincluidosen el Acuerdo: • Servicio experto prestadopor nuestros10,000especialistasen reparacionesprofesionales Unavezadquiridoel Acuerdo,puedeprograrnarel serviciocon tan s61orealizaruna Ilarnadatelef6nica.PuedeIlarnaren cualquier mornentodel dia o de la nocheo prograrnarun servicioen linea. El Acuerdode Protecci6nde Reparaci6nes una cornprasin riesgo. Si ustedanula por alguna raz6nduranteel periodode garantiade producto,proporcionarernosun reernbolsoIleno.O,un reernbolso prorrateadoen cualquiermornentodespu_sdel periodode garantia de productoexpira, iAdquieraboysu acuerdode protecci6npara reparaciones! • Servicio ilirnitadosin cargopara laspiezasy la rnanode obra en todaslas reparacionescubiertas • Reernplazodel productohasta 1500d61aressi no es posible repararel productocubierto • Descuentode 10%del precionormaldel servicioy de las piezas relacionadascon el rnisrnoque no est_ncubiertaspor el acuerdo; adern&s,10%del precionormalde la verificaci6nde rnantenirnientopreventivo Se aplican deterrninadaslirnitaciones y exclusiones.Paraobtener inforrnaci6nadicional y preciosen los Estados UnidosIlarne al 1-800-827-6655. El *Coverage en Canad_variaen algunosarticulos. Paradetalles Ilenosla IlarnadaCharnuscaCanad_en 1-800-361-6665. Servicio de instalaci6nde Sears Si deseasolicitarla instalaci6nprofesionalde Searsde aparatos dorn_sticos,dispositivospara abrir portones,calentadoresde agua y otrosarficulosdorn_sticosirnportantes, en los EstadosUnidoso Canad_Ilarneal 1-800-4-MY-HOME®. • Ayudar_pida pot tel_fono- IoIlarnarnos Resoluci6nR_pida- el apoyotelef6nicode un Charnuscaal representante.Pienseen nosotroscornoel manual"de un due_ohablador." 67 Your Home For troubleshooting, product manuals and home solutions advice: ÷anag÷ www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, ® (1-800-469-4663) day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service Center 1-800-488-1222 (U.S.A.) www.sears.com To purchase a protection 1-800-827-6655 Para pedir servicio a domicilio, agreement de reparaci6n 1-888-SU-HOGAR (1-888-784-6427) piezas: ® (Canada) www.sears.ca (U.S.A.) y para ordenar 1-800-469-4663 on a product serviced by Sears: 1-800-361-6665 (Canada) Au Canada pour service en fran£ais: 1-800-LE-FOYER Mc (1-800-533-6937) www.sears.ca ;ii ® Registered Trademark / TMTrademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries ® Marca Registrada / TMMarca de Fabrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros paises MCMarque de commerce / MDMarque deposee de Sears Brands, LLC