Download Continental Home MATE2 Speaker System User Manual

Communications Options
Why you want them: The MATE communicates commands to different components. It needs
to be aware of any newly added or moved devices so it can recognize them. An error reading
doesn’t mean the system is failing, but that the MATE is looking for a component that has been
moved from one HUB Port to another or has been disconnected completely. The MATE is
trying to account for the system components.
PATH
MAIN----------------------------9:57:32 A
SUM
STATUS
SETUP
ADV
SETUP-------------------------Choose product:
FX
MATE
SETUP/MATE/PAGE1----------mate code rev:
402
choose category:
CLOCK
CNT
GLOW
PG2
PATH
SETUP/MATE/PAGE2-----------choose category:
PG1
SUMRY
COMM
MAIN
SETUP/MATE/PAGE2---------------choose category:
BACK
REPOLL
PC
DEBUG
Press the <COMM> soft key from the <PAGE 2> Setup choices screen for MATE
communications options:
t
<REPOLL> forces the MATE to “rediscover” all the OutBack devices it is connected to.
This must be used any time an OutBack device is moved or added to a HUB.
t
<PC> will allow you to enable or disable the MATE’s RS232 communications port. This
setting must be enabled if you use any third party logging or control software.
t
<DEBUG> tracks communication errors involving the OutBack HUB.
SETUP/MATE/PAGE2-------------choose category:
PG1
27
SUMRY
COMM
MAIN
From the SETUP/MATE/PAGE2 screen, press the
<COMM> soft key.