Download Multitech FF200 User guide

Chapter 5: FaxFinder Client Software Configuration
the sake of simplicity and convenience) to use the same Username and Password for all FaxFinder
units.
NOTE: The Username entered here must match the entry used in the “User ID” field of the Phone
Book screen in the FaxFinder Server Software. The password entered here must match
the password entered for this client in the Password Administration screen in the
FaxFinder Server software.
Click OK.
4. A new FaxFinder entry should appear on the “Device Status” tab of the FaxFinder Fax Client
Software screen.
The status of the newly registered FaxFinder unit should momentarily go from “Logging in” to “Idle.”
If it goes to Login Failure, then one of two things is wrong:
a. The IP address or domain name is wrong. If that is the case, delete that entry (by right-click
DELETE), and enter a new one; otherwise,
b. The Username/Password combination may be wrong. Verify that the Username/Password
combination in the client software screen matches the UserID/Password combination established
in the FaxFinder Server software screen.
Multi-Tech Systems, Inc.
FF200 FaxFinder Fax Server Admin User Guide
62