Download Multitech FF200 User guide

Chapter 5: FaxFinder Client Software Configuration
FaxFinder Fax Client Software Menu Command Definitions (cont’d)
Command Name
Values
Description
Device Status tab (cont’d)
Commands accessed by
Right-Clicking on a
selected FaxFinder
Delete
Dis-associates the client from the selected
FaxFinder or HylaFAX unit so that the client can
no longer send faxes through that FaxFinder unit.
(The FaxFinder Server’s IP address is removed
from the Device Status list of the FaxFinder
Client Software.)
Disable
-Temporarily dis-associates the client from the
selected FaxFinder or HylaFAX unit so that the
client can no longer send faxes through that unit.
Abort
Abort and Pause
---
Properties
--
Multi-Tech Systems, Inc.
To restore the connection to the
FaxFinder/HylaFAX unit, select Ê Disable.
(Because the FaxFinder Server’s IP address
remains in Device Status list of the FaxFinder
Client Software, service can be restored by
toggling the Disable command, thus enabling the
association once again.)
Discontinues a fax transmission in progress.
Discontinues a fax transmission in progress and
puts all pending faxes on hold. After this
command has been invoked, no more faxes will
be sent from this client until
(a) the client PC is turned off and on again, or
(b) the command has been turned off by
selecting Ê Pause Scheduler in the File menu
of the FaxFinder Fax Client Software.
Brings up the FaxFinder <IP address><domain
name> screen. This screen simply shows the IP
address or domain name of the selected
FaxFinder unit.
FF200 FaxFinder Fax Server Admin User Guide
68