Download RECiPROCATiNG SAW

The rubber front housing cover also
serves as an assembly pin retention
mechanism. If the cover is removed or
becomes damaged the pins can fall
out.
Always exercise
extreme caution when positioning
hands, Use both hands to homd and
control toom especiammywhen
making angle or scroll cuts,
Exercise caution when cutting
towards operator.
Always be aware of
increased tool vibration, kickback
and blade breakage potential when
making angle and scroll cuts,
The handle (A) Fig, 14A can be
rotated 90 ° to the right or 90 ° and
180° to the left. To rotate handle,
depress locking lever (A) Fig, 14B and
rotate handle to the desired position.
After adjusting make sure handle is
locked in position before using the
saw.
NOTE: The handb WILL NOT rotate
360°
DO NOT use the
roomunless the rotating handle
is mocked in position, If the
handle will not lock, the toom
must be returned for repair.
Use only
recommended
blades with this tool
DO NOT use jig saw blades without
the proper bmade adapter.
Fig, 14A
Fig, 14B
A03284
12-ENG