Download Cadence Flash F200-2 Specifications

3. Define Network 0:
2212-TOKYO Config>SET DATA-LINK FRAME-RELAY 0
2212-TOKYO Config>NETWORK 0
Frame Relay user configuration
2212-TOKYO FR 0 Config>SET CABLE V35 DTE
2212-TOKYO FR 0 Config>Enable LMI
2212-TOKYO FR 0 Config>SET LMI-TYPE REV1
2212-TOKYO FR 0 Config>ENABLE FRAGMENTATION end
Fragment size (50 to 8190) [256]?
Fragmented packet reassemby timer (3 to 10 seconds) [3]?
2212-TOKYO FR 0 Config>SET LINE-SPEED
Line speed (2400 to 6312000) [64000]? 2048000
2212-TOKYO FR 0 Config>ADD PERMANENT-VIRTUAL-CIRCUIT
Circuit number [16]?
Committed Information Rate (CIR) in bps [64000]?
Committed Burst Size (Bc) in bits [64000]?
Excess Burst Size (Be) in bits [0]?
Assign circuit name []? To-OSAKA
Is circuit required for interface operation [N]?
Enable circuit for voice forwarding [N]? y
Network number of voice forwarding PVC [0]? 1 3
Circuit number of voice forwarding PVC [16]? 3
Do you want to have end-to-end fragmentation performed [N]? y
Fragment size (50 to 8190) [256]?
Fragmented packet reassemby timer (3 to 10 seconds) [3]?
2212-TOKYO FR 0 Config>ADD PERMANENT-VIRTUAL-CIRCUIT
Circuit number [16]? 17
Committed Information Rate (CIR) in bps [64000]?
Committed Burst Size (Bc) in bits [64000]?
Excess Burst Size (Be) in bits [0]?
Assign circuit name []? To-YOKOHAMA
Is circuit required for interface operation [N]?
Enable circuit for voice forwarding [N]? y
Network number of voice forwarding PVC [0]? 2 4
Circuit number of voice forwarding PVC [16]? 4
Do you want to have end-to-end fragmentation performed [N]? y
Fragment size (50 to 8190) [256]?
Fragmented packet reassemby timer (3 to 10 seconds) [3]?
2212-TOKYO FR 0 Config>
2212-TOKYO *RESTART y y
3 Network 0 DLCI 16 maps to Network 1 DLCI 16
4 Network 0 DLCI 17 maps to Network 2 DLCI 16
4.2.5.8 IBM 9783 Design
We will use the following blank sheets to design 9783 Tokyo and 9783 Osaka.
Some values are already filled in as default parameters.
128
IBM Voice Over Frame Relay Perform Guide