Download Moog Taurus 3 Specifications

T3 User’s Manual - The Basics
How to Use this Manual
The Setup and Connections section below explains how to unpack, setup and connect the Taurus 3, and provides a quick start to get you up and running with your new instrument. Please read this section first!
The Components section offers detailed explanations of the components that create and modify sound.
For those interested in MIDI interface specifics, see the section titled How the Taurus 3 handles MIDI (page
50), as well as the MIDI Implementation Chart, which appears in Appendix B.
Throughout the manual you will see icons that point out additional information:
This icon indicates an important note concerning the operation of the Taurus 3.
This icon indicates a useful performance or programming tip.
This icon indicates technical information for the advanced user or the technically curious.
Setup and Connections
The following should get you set up and running quickly. When exploring the Taurus 3 for the first time, you
may want to place the instrument on a table or other study surface so that you can easily reach and activate
the front panel controls in order to become familiar with the basic operation.
NOTE: We encourage you to read the entire manual at some point to learn more about the
instrument and gain a better understanding of what you can do with the Taurus 3.
Check the contents in the shipping carton
The Taurus 3 is shipped with the following items:
1. Taurus 3 Bass Synthesizer
2. Power cord
3. Taurus 3 User’s Manual
4. Warranty registration card
What you will need
In addition to the Taurus 3 and provided accessories, you will need:
1. A stand or table sufficient to support the Taurus 3 (45 lbs).
2. A 1⁄4” instrument cable
3. An amplifier or mixer (the Taurus 3 does not provide a headphone output)
Page 5