Download Uniden U2 DB-CP Specifications

ler for thefirst time,disableall of yourTSRsto eliminateanypotentialstart-upproblems.
An easyway to
do this is to createa systemdisk on a "floppy" (in DOS,typeFoRMAT
A: /s to createa systemdisk),starl-up
yourcomputerfiom thatdisk,thenaccess
programyou planto usewith yourPK-96.
thecommunications
To preventprogramsfrom automatically
simplyhold downthe
bootingin yourMacintoshor Powerbook,
(SHIFT)keyon power-up
untilyou seetheWel come to Maci ntosh , Extens'i ons Off mcssage.
The Software
If you're going to use your PK-96 with a computer,you'll needto read parts of this sectionto set LlpyoLlr
communications
or terminal(modem)programsofiwarc.Il'you'll be usingyour PK-96 with a dumb terminal, you won't need any softwareand can skip to the next section,SystemStart-up and lnop-backTest.
The PK-96 operatesin much the samemanneras a telephonemodem, so most telephonemodem terminal
programswill work with your PK-96. Someol theseprogramsare in the "public domain,"which means
they're fiee. Other terminal programsare "share-ware,"which meansyou may get them lrom a fl-iendand
try them before you buy them. Of course,you can always purchasea prograrnoutright from a local amateur radio dealer,a nearbycomputerdealer,or through mail-ordersoftwarehouses.
Follow the installationdirectionsthat come with the terminal program you plan to use.Once installedon
your computer,you should staft the programand set its parametersto:
.
Data Rate = 9600 bits per second(Baud)
.
Data bits/word length = 7
.
Parity = EVEN
.
Stop bits = I
.
Duplex = FULL
.
Handshake= XON/OFF
Whether you're using an Timewaveprogramor not, seebelow fbr the particulartype of computeryor.rplan
to use.
Ncvl'n:
As o deJault,the PK-96 provitles XON/XOFF softwereflow-control to the computer or termincLl.The PK96 command, XFLOW, can be turnecloff to disable sofiwore.t'lowcontrol and enable hcLrdwarehanclshake
if your computer requires it. Hardware flow control is ctchieveclvvithRTS/CTS(pins 4 cLnd5) of the DB-25
RS-232 I/O connector
PC CompatibleComputers
Although you can usealmostany terminalprogramwith your PC compatible,Timewavecunently sellsthe
PC-Pakratt-ll with FAX and PC-PakrattforWindows programs that provide many handy featuresnot available in telephonemodem programs.
If you already have eitherPC-Pctkratt-llwith FAX or PC-PakrattforWindows, follow the instructionsin
the program's manual to install the softwareon your computer.For initial checkoutof the PK-96, use the
program'sDumb Terminal mode.
A parrial list of PC programstestedwith the PK-96 includes:ProComm, ProComm Plus, CrossTalk-XVI.
Smar-tcom,Smartcom for Windows, Relay, BitCom, Qmodem, PC-Talk, CTerm, HamCom, PackComm,
PackTalk, HamPac, Lanlink, MSYS, YAPP, and the terminal program included with Microsoft Windows.