Download Epson EB-X21 Technical data

Transcript
The barcode type is denoted by k. The following values are valid for k:
k
Barcode Type
Dec
Hex
177
B1
<reserved>
178
B2
EAN-13
179
B3
EAN-8
180
B4
CODE 39
181
B5
<reserved>
182
B6
INTERLEAVED 2 of 5
183
B7
UPC-A
184
B8
<reserved>
185
B9
POST-NET (barcode)
186
BA
CODE 128
Module width is denoted by m. When m is 1, the barcode prints by
1/360 or 1/240 full dot method. For all other values, the barcode prints by half
dot method. The suggested values for m are as follows:
m
Dec
Hex
0
Unit Module
Dots
Width
24 wire
9 wire
00
0.015 in.
0.021 in.
1
01
0.012 in.
0.017 in.
2
02
0.015 in.
0.021 in.
3
03
0.021 in.
0.030 in.
4
04
0.026 in.
0.038 in.
The variable s denotes the space width adjustment and affects the barcode
printing width. The value for s may range from 3 (03 hex) to -3 (FD hex),
however, 0 is the default value. The adjustment unit for 24 wire printers is
1=1/360 in. and for 9 wire printers the unit is 1=1/240 in.
The variables v1 and v2 control the bar length. The minimum value of v1, v2 is
288 dec (24 wire) and 270 (9 wire).
62
Section 3: IBM Emulation Mode Printer Commands