Download ATTO Technology 1550D/E Specifications

ModelNumber
Controls the iPBridge model number string to an OEMspecific value. Displays during POST and by using the
Info CLI command. ID is padded with 0s to a maximum of
8 characters
ProductID
Controls the iPBridge product ID string to an OEMspecific value. Displays during POST and the CLI Info
command. ID is padded with 0s to a maximum of 16
characters
Default:1500 or 1550
Set syntax: set ModelNumber [string]
Requires a SaveConfiguration command
Get syntax: get ModelNumber
Default: iPBridge
Set syntax: set ProductID [string]
Requires a SaveConfiguration command
Get syntax: get ProductID
OEMConfigFile
Reports the name of the OEM Configuration file stored in
persistent memory. If no file is present, ATTO is returned.
The file is an ASCII text file which contains all the CLI
commands that can be used to override the factory default
settings of the iPBridge. It consists of a header record and
a list of CLI commands. Each line may contain up to 128
characters and must be terminated by any of the standard
EOL combinations such as \r, \n, or \r\n. Updates may be
loaded via any of the current firmware update methods
(see Updating firmware on page 47).
VendorID
Controls the iPBridge vender ID string to an OEMspecific value. Displays during POST and the CLI Info
command. is padded with 0s to a maximum of 8
characters
Default: ATTO
Set syntax: set VendorID
Requires a SaveConfiguration command
Get syntax: get VendorID
Default: ATTO
Get syntax: get OEMConfigFile
The following table lists the CLI commands supported in the OEM configuration (*.cfg) file. Any
command which displays information is not honored in the *.cfg file, i.e., only the set version of
commands will be honored.
OEM Config file supported commands
AutoMapOnBoot
iSCSIChap
Route
BridgeName
iSCSIChapSecret
SCSIInitID
ColdReset
iSCSIPortNumber
SCSIPortBusSpeed
DPMTU
iSCSITarget
SCSIPortResetOnStartup
EthernetControl
ISNSServer
SCSIPortSyncTransfer
EthernetSpeed
iSNSLoginControl
SCSIPortWideTransfer
InquiryProductID
iqnVendorPrefixID
SCSITermination
InquiryVendorID
ModelNumber
SerialPortBaudRate
IPAddress
MultiTargetMode
SerialPortEcho
IPDHCP
Password
SpeedWrite
IPGateway
ProductID
SpeedWriteDefault
IPSubnetMask
ReadOnlyPassword
Username
iSCSIAlias
ReadOnlyUsername
VendorID
RMON
42
Configuration: CLI