Download Rioworks SDVIA-LS User guide

Overview
Overview
Overview
Thank you for choosing RIOWORKSTM SDVIA . The SDVIA is a dual FC-PGA Socket
370 motherboard (M/B) based on the ATX form factor featuring the VIA apollo PRO
133A chipsets. As high performance chipsets built in the M/B, the SDVIA can supports
dual Intel ® FC-PGA Pentium III™ 533~1G+ MHz processor and 100/133MHz CPU
Front Side Bus (FSB). In the AGP bus performance, it supports AGP PRO/4X/2 X mode
and pipelined spilt-transaction long-burst transfers up to 1066 MB/sec. According to
different customer’s requirements, SDRAM and VC M DRAM can be applied to the
SDVIA and the maximum memory size can be up to 2.0GB (1.5GB when FSB=133).
The on-board AMI IDE RAID controller provides the transfer rate up to 100MB/s per
channel and RAID level 0 (Striping), 1 (Mirroring) and 0+1 (Striping+Mirroring).
Therefore, with SDVIA, people can gain higher system performance than before. Now,
Enjoy every feature of SDVIA.
Unpack Your SDVIA
Remove all items from the box and make sure you have these items:
!" One SDVIA motherboard
!" One ATA/66 IDE ribbon cable
!" One Floppy ribbon cable
!" One bag of spare jumpers
!" One User’s Guide
!" One CD containing drivers and utilities
If you discover any damaged or missing items, contact your retailer.
About This User Guide
This manual explains how to build your system with SDVIA in detail. Please follow the
procedures carefully and pay special attention to the IMPORTANT, WARNING and
NOTE symbols.
1