Download RIKA Visio Technical data

Transcript
GENERAL WARNING AND
SAFETY INSTRUCTIONS
Do not touch these parts without the rele-
The introductory general warning and
safety instructions must be unconditionally observed
protective gloves or operating materials
Read the whole manual thoroughly be-
particular danger and keep them away
vant protective clothing or aids such as heat
(cold hand).
➧
➧
fore using the fire for the first time.
➧
from the heating device during operation.
Only approved transport aids with ade-
➧
quate carrying capacity may be used to
➧
Do not put washing on the fire to dry.
➧
Stands for drying items of clothing or
Your heating device is not suitable for use
as a ladder or to stand on.
➧
Do not place non-heat resistant items on
the heating device or in its vicinity.
transport the heating device.
➧
Ensure that children are aware of this
suchlike must be set up at an adequate
Burning fuels releases heat energy that
distance from the heating device - fire
leads to the surface of the pellet heater, as
hazard!
well as the doors, the door and operating
➧
handles, the door glass, the smoke tubes
Processing easily inflammable or explo-
sive substances in the same of adjoining
and occasionally the front wall of the hea-
rooms is prohibited when the heating device
ting device heating up.
is in operation.
2 . W H AT A R E P E L L E T S ?
Pellets are made from wood waste from
Please request the tested fuel and a list of
monitored fuel producers from your pellet fire
consultant.
Using poor quality or prohibited pellet fuel
influences the function of your fire and can
further lead to the guarantee and the product
liability becoming invalid.
saw- and planing mills as well as brash from
forestry operations. These „starting products“ are crushed, dried and pressed into
„fuel“ pellets without any binding agent.
SPECIFICATIONS FOR HIGH QUALITY
PELLETS:
PELLET STORAGE
Thermal value:
Density:
Water content:
Ash content:
Diameter:
Length:
Contents:
Packaging:
5.3 kWh/kg
700 kg/m3
max. 8 % of the weight
max. 1% of the weight
5 - 6.5 mm
max. 30 mm
100 % wood, untreated and without
any binding agent (proportion of bark
max. 5 %)
in sacks made from environmentally
friendly or biologically degradable
plastic or from paper (2 - 3 layer/
similar to cement packaging)
The fuel must be stored as dry as possible
in order to guarantee problem free burning
of the wood pellets.
9
E NG LI S H
1. I M P O R TA N T I N F O R M AT I O N