Download RIKA Visio Technical data
Transcript
GENERAL WARNING AND SAFETY INSTRUCTIONS Do not touch these parts without the rele- The introductory general warning and safety instructions must be unconditionally observed protective gloves or operating materials Read the whole manual thoroughly be- particular danger and keep them away vant protective clothing or aids such as heat (cold hand). ➧ ➧ fore using the fire for the first time. ➧ from the heating device during operation. Only approved transport aids with ade- ➧ quate carrying capacity may be used to ➧ Do not put washing on the fire to dry. ➧ Stands for drying items of clothing or Your heating device is not suitable for use as a ladder or to stand on. ➧ Do not place non-heat resistant items on the heating device or in its vicinity. transport the heating device. ➧ Ensure that children are aware of this suchlike must be set up at an adequate Burning fuels releases heat energy that distance from the heating device - fire leads to the surface of the pellet heater, as hazard! well as the doors, the door and operating ➧ handles, the door glass, the smoke tubes Processing easily inflammable or explo- sive substances in the same of adjoining and occasionally the front wall of the hea- rooms is prohibited when the heating device ting device heating up. is in operation. 2 . W H AT A R E P E L L E T S ? Pellets are made from wood waste from Please request the tested fuel and a list of monitored fuel producers from your pellet fire consultant. Using poor quality or prohibited pellet fuel influences the function of your fire and can further lead to the guarantee and the product liability becoming invalid. saw- and planing mills as well as brash from forestry operations. These „starting products“ are crushed, dried and pressed into „fuel“ pellets without any binding agent. SPECIFICATIONS FOR HIGH QUALITY PELLETS: PELLET STORAGE Thermal value: Density: Water content: Ash content: Diameter: Length: Contents: Packaging: 5.3 kWh/kg 700 kg/m3 max. 8 % of the weight max. 1% of the weight 5 - 6.5 mm max. 30 mm 100 % wood, untreated and without any binding agent (proportion of bark max. 5 %) in sacks made from environmentally friendly or biologically degradable plastic or from paper (2 - 3 layer/ similar to cement packaging) The fuel must be stored as dry as possible in order to guarantee problem free burning of the wood pellets. 9 E NG LI S H 1. I M P O R TA N T I N F O R M AT I O N