Download AAP Elite S series Specifications

INTRODUCTION
The ELITE 64 alarm control panel has been designed to provide the most requested features for both the installer &
the end-user. These features include ease of installation, ease of programming and user friendly operation all in a
package which is reliable, functional and attractive. The ELITE 64 consists of a central control unit plus up to two 32
zone expansion modules. The central control unit can monitor up to 64 zones. These zones can be a mix of
hardwired or wireless devices (wireless devices connect using the optional receiver). The wired detectors connect via
the two 32 zone hardwired expansion modules. The two hardwired expansion modules and radio receiver connect to
the central control unit via the keypad buss.
Utilising many years of experience in the security industry and implementing valuable feedback, we are proud to
provide you with a new generation of alarm controller. The ELITE 64 is a New Zealand designed and built product
which brings you the quality and features which you deserve at an affordable price. In addition to the advanced
design, only the highest quality components have been used in the production of this panel to ensure the highest
degree of reliability.
This manual will guide you through the installation and programming of your alarm panel. For additional information
regarding the day to day operation of the panel please refer to the enclosed “User’s Guide”.
PACKAGE CONTENTS
The Arrowhead ELITE 64 central control unit should contain the following items;
1x
1x
1x
1x
1x
ELITE 64 controller PCB
Polycarbonate housing
17 volt 1.4a mains transformer
Cabinet hardware accessory pack including,
1x
Cabinet tamper switch
1x
Battery lead set
2x
Cabinet lid screws
2x
2k2 (red, red, red) end of line resistors
ELITE 64 Users Guide
If any of these items are missing from this package, please contact the Distributor where you purchased the
equipment.
The Arrowhead ELITE 32EX, 32 zone expander unit should contain the following items;
1x
1x
1x
1x
ELITE 32EX controller PCB
Polycarbonate housing
17 volt 1.4a mains transformer
Cabinet hardware accessory pack including,
1x
Cabinet tamper switch
1x
Battery lead set
2x
Cabinet lid screws
34 x
2k2 (red, red, red) end of line resistors
34 x
4k7 (yellow, violet, red) end of line resistors
If any of these items are missing from this package, please contact the Distributor where you purchased the
equipment.
Page 5