Download Response SA5 E Operating instructions

PART-ARM 1 SETUP
Press
to save and exit, or
The parameters in this menu control the systems Exit-
Press
to exit without saving.
Delay period and the Entry/Exit Delay warning beeps
Press
during Part-Arm 1 mode.
to return to top level Part Arm 1 Setup
menu.
PROGRAM MODE
Code:
ENTRY-DELAY BEEPS
Allows the Entry-Delay warning beeps when activating
6. PART ARM 1
SETUP
Part-Arm 1 to be switched ON or OFF.
Default Setting: ON
6-1 EXIT Delay
xxx xxxs
6-3 Exit Delay
Beep: xxx
6-2 Entry Delay
Beep: xxx
Select
ON->1 OFF->3
6-1-1 Status
xxx
Select
ON->1 OFF->3
Enter (10-250s)
Scroll through the programming menu until ‘6. PART
ARM 1 SETUP’ is displayed and press
.
Note: After configuring Part Arm 1 press
to
return to the top level programming menu.
EXIT-DELAY PERIOD
Scroll through the menu until ‘6-1 EXIT-DELAY’ (and
the current setting) is displayed.
To change the settings press
Default setting: ON
Scroll through the menu until ‘6-1-1 Status’ (and
the current setting) is displayed.
.
Press
to enable the Exit-Delay, or
Press
to disable the Exit-Delay.
Delay Period
Default setting: 30 seconds
Scroll through the menu until ‘6-1-2 Delay Time’
(and the current setting) is displayed.
To change the settings press
.
Enter the required delay period (10 to 250
seconds).
36
.
Press
to enable the beeps, or
Press
to disable the beeps.
EXIT-DELAY BEEPS
Allows the Exit-Delay warning beeps when activating
Part-Arm 1 to be switched ON or OFF.
Default Setting: ON
Scroll through the menu until ‘6-3 Exit Delay Beep’
(and the current setting) is displayed.
To change the setting press
.
On/Off Status
To change the setting press
(and the current setting) is displayed.
To change the setting press
6-1-2 Delay Time
Enter (10-250s)
Select
ON->1 OFF->3
Scroll through the menu until ‘6-2 Entry Delay Beep’
.
Press
to enable the beeps, or
Press
to disable the beeps.