Download Chicago Pneumatic SD25 Instruction manual

xxxxxxxxxx
CS2700/4700 Controllers Technical Reference_________________________________________
Preface
The CS4700/2700 controllers are functionally equivalent to the CS4100/2100. In fact, most of the
internal electronics and software is identical. The CS4700/2700 packaging has been improved to be
smaller and lighter.
The CS4700/2700 Controller manufactured by CP techmotive tool is a component of one of the most
powerful DC electric nutrunner fastening control systems available. The system uses 100% digital
technology from the tool to ensure accurate and reliable fastening and data acquisition.
Microprocessors in both the fastening tool and the controller’s tool control module (TCM) enable the
system to perform to levels of accuracy while providing easy set-up and operation previously
unattainable. With Intelligent tool technology you no longer need to enter tool identification,
calibration, angle counts, speed and other information. You simply plug in the tool, power on the
system, program the desired tightening specifications and begin production.
A complete nutrunner fastening control system is made up of one of the following:
* A CS4700 Controller with a CP techmotive tool 56, 66 or 116 Series nutrunner, 27 A tool control
module (TCM) and cable
* A CS4746 Controller with a 46 Series nutrunner, 8 A TCM and cable
* A CS2700 Controller with a SD25 electric screwdriver, 6 A TCM and cable
The CP techmotive tool Visual Supervisor software program is used for system setup, fastening, data
collection, and diagnostics although basic programming can be done by a local keypad and display on
some models.
Who Should Use This Manual
This manual is written for the engineers, technicians and users who will set-up and/or operate the
CS4700/4746/2700 Controller with their respective nutrunner or screwdriver models listed above.
How to Use This Manual
This manual provides installation, maintenance and technical information about the CS4700/2700
Controllers.
This Preface provides conventions and abbreviations used throughout this manual.
It is recommended that you read this manual entirely before you use a CS47XX/2700 Controller.
This manual may have some illustrations and text that applies to the latest firmware:
CCM 1.13
DCM 6.16
VS 3.33
____________________________________________________________________________________________
Page 4
39-30-43083