Download Rover XT143 Operator`s manual

Half open
Full open
Close
Choke
Lever
SHOULDER HARNESS
1. Wear the harness on the shoulder then
ƒ†Œ—•––Š‡•–”ƒ’•ƒ†„—…Ž‡•ƒ……‘”†‹‰–‘
your stature until you feel comfortable with
it on.
2. Attach harness hook to a suitable suspension
point on the harness bracket according to
–Š‡Š‡‹‰Š–‹†‡–‹Ƥ…ƒ–‹‘•Ǥƒ‡•—”‡–Š‡
unit gets a good balance before operating.
STARTING WARM ENGINE
1. Push the ignition switch to the “START”
position
2. Move the choke lever to the“HALF OPEN”
position.
3. Hold the unit in left hand and press it against
the ground.
4. While holding the starter handle in right
hand. Gently pull the starter rope out until
you feel that the pawls hook onto the
ƪ›™Š‡‡Žǡƒ†–Š‡’—ŽŽ–Š‡•–ƒ”–‡”“—‹…Ž›Ǥ
WARNING : •‡
•‡–Š‡“—‹…Ǧ”‡Ž‡ƒ•‡
–Š‡ “—‹… ”‡Ž‡ƒ•‡
5. Repeat several times until the engine starts.
6. Move the choke level to the“Full Open”
position.
mechanism on the harness to free
›‘—”•‡Žˆ“—‹…Ž›ˆ”‘–Š‡—‹–‹…ƒ•‡
of emergency.
STOPPING INSTRUCTIONS
SETTING THE LENGTH OF THE CUTTING LINE
1. The trimmer head releases the line without
Šƒ˜‹‰–‘•–‘’–Š‡‡‰‹‡Ǥ‘†‘–Š‹•ǡ„”‹‡ƪ›
tap the trimmer head on the ground while
operating the unit at high speed．
2. The cutting line should always have the max.
WARNING : Move the choke lever
Ž‡‰–ŠǤŠ‡•Š‘”–‡”–Š‡…—––‹‰Ž‹‡„‡…‘‡•ǡ
to the “CLOSE” position if the engine
–Š‡‘”‡†‹ƥ…—Ž–‹–‹•–‘”‡Ž‡ƒ•‡Ǥ
can not be shut down by the two
͗ǤŠ‡•Š‹‡Ž†‹•‡“—‹’’‡†™‹–Šƒ…—–‘ơ‹ˆ‡
—’’‡”•–‡’•ǡ–Š‡ƒ†Œ—•–…ƒ”„—”‡–‘”
which automatically removes any excess
after the machine becomes cold or
line that is released.
contact the authorized dealer for help.
͘ǤŠ‡•Š‹‡Ž†‹•‡“—‹’’‡†™‹–Šƒ…—–‘ơ‹ˆ‡
which automatically removes any excess
line that is released.
͕Ǥ‡Ž‡ƒ•‡–Š‡–Š”‘––Ž‡–”‹‰‰‡”ǡƒ†–Š‡Ž‡ƒ˜‡
the idling engine to cool down.
2. Move the ignition switch to the “OFF”
’‘•‹–‹‘ƒ†Š‘Ž†—–‹Ž–Š‡‡‰‹‡‹•‘ơǤ
- 12 -