Download Savin 9980 Operating instructions

Getting Started
to match the new paper size.
H While
holding in the green release laver, align the rear fence to
the new paper size.
1
Note
❒ The front fence might be fixed
by screw.
F Make sure that the front fence is
aligned with the size line on the
base of the paper tray.
I Check that the rear fence is set in
the correct position.
Make sure that the holes in the
base of the paper tray are properly
aligned with the holes in the rear
fence.
G Remove the two green screws on
the rear fence as shown.
J Fix
the rear fence with the two
screws you removed in step G.
K While squeezing in the sides of
40