Download MAC TOOLS MW250 Operating instructions

TM 5-4310-452-14
Section XII. FRAME AND TOWING ASSEMBLY MAINTENANCE
Paragraph
Number
4-74
4-75
4-76
4-77
Page
Number
Title
Drawbar Replacement .................................................................................................... . 4-147
Spare Tire Mount Replacement .................................................................................. ..... 4-148
Mudflap Replacement ............................................... ...................................................... 4-149
Leveling Jack Replacement ...................................... ............................................. ......... 4-150
4-74. DRAWBAR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
• Engine off.
Materials/Parts:
• Five self-locking nuts
Tools/Test Equipment:
• General mechanic's tool kit
• Torque wrench
• Common number 2, less power
a. REMOVAL
1. Remove 5 capscrews (4), washers (1), and selflocking nuts (2) from drawbar (3) and frame.
Discard self-locking nuts.
2. Remove drawbar (3) from frame.
b. INSTALLATION
1. Position drawbar (3) in place on frame and install 5
capscrews (4), washers (1), and new self-locking
nuts (2).
2. Tighten capscrews (4) and self-locking nuts (2) to
180-200 lb. -ft. (244-271 N•m).
4-147