1
Download Basler Vision Technologies BIP-1300c-dn User`s manual
Transcript
Configuring the Camera Stream AOI Left - As shown in Figure 4 on page 24, sets the left offset (in pixels) for the stream AOI, i.e., how far the stream AOI will be offset from the left edge of the image area captured by the camera’s sensor. The setting must be a multiple of 2. See also, the stream AOI Editor description on the next page. Stream AOI Top - As shown in Figure 4 on page 24, sets the top offset (in pixels) for the stream AOI, i.e., how far the stream AOI will be offset from the top edge of the image area captured by the camera’s sensor. The setting must be a multiple of 2. See also, the stream AOI Editor description on the next page. Stream AOI Width - As shown in Figure 4 on page 24, sets the width (in pixels) of the stream AOI. The setting must be a multiple of 8. See also, the stream AOI Editor description on the next page. Stream AOI Height - As shown in Figure 4 on page 24, sets the height (in pixels) of the stream AOI. The setting must be a multiple of 8. See also, the stream AOI Editor description on the next page. Basler IP Camera 27
