Download MultiModem MTCBA-C User guide
Transcript
Chapter 3 – Using the Web Management Software DHCP Server, Subnet Settings General Configuration DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP server. The overall purpose of DHCP is to make it easier to administer a large network. DHCP: Enable or disable the DHCP server. Subnet: Enter the subnet address. If you want to change the DHCP subnet address, you first have to delete all the subnet settings below. Mask: Enter the subnet mask. Gateway: Enter the gateway address. DNS: Enter the DNS address. Lease Time: Select the DHCP Lease Time from the selection box. Lease time is set in days, hours, and minutes. A Lease Time of 00-00-00 is an Infinite Lease Time. To save your changes, click SUBMIT. To ensure your changes go into effect, click Save and Restart. Subnet Settings From-To Range: Enter the range of IP addresses to be assigned by DHCP. Add: Click the Add button. The address range is added and appears in the table at the bottom of the screen. Once the range displays, you can delete if necessary. Note: MultiModem rCell User Guide See Appendix A Commonly Supported Subnets. 69