Download Worth Data 5000 TriCoder s Specifications
Transcript
inspect the narrowest bar and narrowest space after printing (wait about 30 minutes to 1 hour for any bleeding of the ink to complete). They should be very close to equal. If they vary by more than 10% from each other, then the exposure on the film must be changed; if the bars are too big, expose less; if the spaces are too big, increase the exposure. Don't forget to leave a 1/4" white space to the left of the bar code and a 1/4" white space to the right of the bar code (no text or other graphics in these areas). 29