Download Epson AcuLaser M4000N User`s guide

AcuLaser M4000 Series
User's Guide
Chapter 5
Replacing Consumable Products
Precautions During Replacement
Always observe the following handling precautions when replacing consumable products.
For details about the replacement, see the instructions on the package.
❏ Provide enough space for the replacement procedure. You will have to open some parts (such
as the printer cover) of the printer when you are replacing consumables.
❏ Do not install used consumable products into the printer.
w
Warning:
❏ Be careful not to touch the fuser, which is marked CAUTION HOT SURFACE or CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and
surrounding areas may be very hot.
❏ Do not dispose of used consumable products in fire, as they may explode and cause injury. Dispose
of them according to local regulations.
Replacement Messages
If a consumable product reaches the end of its service life, the printer displays the following
messages on the LCD panel or the window of EPSON Status Monitor. When this happens, replace
the depleted consumable products.
LCD Panel Message
Description
Replace Toner Cartridge
The imaging cartridge has reached the end of its service life.
Replace Fuser
The fuser unit has reached the end of its service life.
Note:
Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD
panel for replacement messages for other consumable products.
Replacing Consumable Products
Downloaded from ManualsPrinter.com Manuals
121