Download Sharp IV-S30 User`s manual

Multiple Degree of Match Inspection
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu on
the "MEAS COND (or REG COND)" screen
and press the SET key. Select
"EVALUATION" on the pop up menu to go to
the "EVALUAT COND" screen.
MEAS CND
SCREEN COND SAVE
F C1 BRT
IMG PRE-PROC
REG-COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
1DTECT PRECISION
2REGISTER NO.
3MODE
4MATCHING
5DETECT ORDER
STANDARD
0(0~3)
YES
AVG-GRAYS
SCAN-ORDER
REGISTER NO.
6DTECT OBJECT
0001020304 05 060708 09 101112131415
S ×××
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
2) Move the cursor to the "EVALUATION COND"
item on the menu tree screen and press the
SET key.
SELECT OBJECT TYPE COND
F C1 BRT
OBJECT TYPE COND
+ TYPE00
1REGISTER NO.
TYPE RUN COND
2CONDITION SET
IMAGE-ADJ
3NUMBER OF OBJ
MEA-CND(CAMERA1)
4DTECT NUMBER
MEAS0
5MATCH LVL
POSI-CORRECT
6GRAY LVL
MEAS01(MULTI MATCHES)
7TEST
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
+ DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
MEAS(NEW)
+ MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
The "EVALUAT COND"(evaluation conditions)
screen will appear.
For details about the evaluation conditions,
see page 3-18.
EVALUAT COND SCREEN COND SAVE EDIT SEL
1REGISTER NO.
2CONDITION SET
3NUMBER OF OBJ
4DTECT NUMBER
5MATCH LVL
6GRAY LVL
X COORD.
Y COORD.
7TEST
0COND.1
AUTO(–10%)
000~128
000~(0~000)
-10000~+1000
000.0~255.0
[TEST RESULT]
[OUTPUT]
K=
NO
M0=
NO
G0=
NO
X0=
Y0=
EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
13-7
F C1 BRT
13