Download Microtest OMNIScanner2 User guide

OMNIScanner User Guide
a different USB port, a separate installation of the driver from the Scanlink
Tools CD is required.
Uploading OMNIScanner2 Test Results to the PC
1. To send test results from OMNIScanner2(s) to a PC, first turn your PC on.
2. Connect the PC with OMNIScanner2 via the high-speed USB cable.
3. Turn on OMNIScanner2
4. Run the Scanlink software and click on the
toolbar, or select Upload in the File menu.
(Upload) button in the
5. In the Scanner Type field, select OMNIScanner.
6. Select the appropriate port (USB).
7. Click Upload to establish communications between Scanlink and
OMNIScanner2 and upload the Autotest data that are stored in the
scanner’s memory.
8. Scanlink can
upload data from
several scanners at
once. If you have
more than one
scanner connected,
the USB Connection List will appear
and allow you to
select the scanners
you wish to upload
from. The
OMNIScanner2s are
listed by serial
number. Select the
appropriate scanner(s) and click OK to continue.
9. If more than one Project is found, the Project List will appear and allow
you to select the project(s) you wish to upload. Make the appropriate
choice and press OK to continue the upload process.
12 - 3