Download Qlogic QLA22xx board User`s guide

Q
7 – Setting Up Connections
Configuring LUNs for a Device
The following messages can display:
❑
If SANblade Manager detects an invalid LUN configuration, the detected
invalid LUN configuration message displays. Invalid LUN configurations
include:
❑
A LUN with contradictory enabled paths. All paths must be enabled or
disabled.
❑
Too many or too few preferred paths in the system. Only one path can
be preferred at a time.
Click OK; auto configure runs automatically.
❑
If SANblade Manager detects an invalid SAN fabric configuration, the
detected invalid SAN fabric message displays. Change this configuration
before continuing; it is beyond the scope of SANblade Manager to configure
the SAN fabric. Click OK to continue.
The LUN Configuration dialog box displays for the device (see figure 7-7).
Figure 7-7. LUN Configuration Dialog Box
The title bar displays the host name and world wide device node name. The
table displays the following information:
FS0054601-00 E
❑
LUN. LUN number
❑
Enable. Whether the LUN is enabled
❑
Device Port Name. World wide device port name
❑
Adapter n (State/Topo/Current). The adapter cell in the table represents
a path from the adapter to the device.
7-17