1
Download Agilent Technologies Ininiium 90000 Technical data
Transcript
Function Commands
16
:FUNCtion<N>:DIVide
Command
:FUNCtion<N>:DIVide <operand>,<operand>
The :FUNCtion<N>:DIVide command defines a function that divides the
first operand by the second operand.
<N>
<operand>
An integer, 1 - 4, representing the selected function.
{CHANnel<n> | DIFFerential<P> | COMMonmode<P> | FUNCtion<n> |
WMEMory<n> | <float_value> | MTRend | MSPectrum}
See the discussion of possible operands in the introduction to Chapter 16,
“Function Commands,” starting on page 287.
Example
This example sets up function 2 to divide the waveform on channel 1 by
the waveform in waveform memory 4.
myScope.WriteString ":FUNCTION2:DIVIDE CHANNEL1,WMEMORY4"
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
297
