Download Axis CAMERA STATION - User`s manual

Transcript
AXIS Camera Station - How to...
Initial State
Output ports can be set to an initial state upon startup and when AXIS Camera Station
establishes contact with the camera.
Check ‘On startup set to’ to enable setting the initial state of the output port and
choose the initial state of the Output port from the drop-down list. The names for the
states were defined under Names.
Set up schedules
Timetables can be set up to be used in Event Configuration Wizard and Recording Settings. Once a schedule has been entered,
it can be reused as often as necessary. On special dates, for example public holidays, special schedules can be used. Follow
these steps to set up a schedule:
1. Navigate to Configuration > Schedules from the menu.
2. Click Add to open the Schedule Editor.
3. Enter a descriptive name for the schedule.
4. Click and drag on the timelines to define intervals. A blue bar means the
schedule is on while white means the schedule is off.
5. To use a different schedule for special dates, click Override.... Select the special dates and click Edit... to set up
the schedule.
6. Click OK to save.
30