Download Roland LEC-300A Setup guide

9. Installation of Ventilating Equipment
Ventilating Equipment
? P. 20, “Air Ventilation.”
In preparing ventilating devices, please note the following points.
 You will be required to use the ventilating devices recommended by Roland DG Corporation. For
the details of the recommended products, contact your authorized Roland DG Corp. dealer.
 You will need a hose to connect the ventilating equipment and this machine.
The connecting port diameter: 38mm
Installing the Ventilating Equipment
Procedure
Note: The 3-mm hexagonal wrench is not included. It must be provided separately.

Remove the panel on the right side of the air-intake port.
Hexagonal wrench
(3 mm)

Attach the connection adapter.
Use the screws that secured the panel in place on the right side of the air-intake port.
Connecting port:
Diameter of 38 mm
60
Hexagonal wrench
(3 mm)