Download CCTV Tester Pro Specifications

IP/CC
CTV Tester User’s Manual
N
Note: PoE power su
upply equipment ( PoE switch, PSE power supply) mu
ust be connected too the
teester’s PSE IN porrt so it can power the
t IP camera or other
o
devices that are
a plugged into th
he
teester’s LAN jack. Warning: Do not connect
c
POE switcches or power supp
plies port to the
U
UTP/SCAN jack. This
T will damage th
he tester.
33.3.15 Data mon
nitor
C
Connect the device to
t the tester using th
he RS485 or RS232
2 ports. Press
too enter. Press
to select
, press .
to set the baaud rate of RS485/R
RS232 port. The tesster must match the baud
raate of the device beeing analyzed. Data transfer will start automatically.
a
If the tester can interprett the
pprotocol being sent, the tester will displlay it in the upper riight (“P: Pelco D”).. If not, “P:---“ willl display.
P
Press
to stop the transfer. PTZ co
ontrol codes from a joystick, DVR or keyboard
k
can also bbe
ddisplayed .
22