Download Access VIRUS CLASSIC Specifications

184
CHAPTER 19
Tips, Tricks& Words Of Wisdom
ABOUT EFFECTS
Delay/Reverb Effect
Send
The Virus as an Effect
Device
The Effect Send parameter works like a
classic aux send knob on a mixer (postfader), i.e. it adjusts the level of the global DELAY/REVERB effect signal without
influencing the dry signal. However, the
dry signal is faded out in the final third
of the control range so that you can also
patch just the pure effect signal of a
MULTI Part through as you would it you
were using a conventional dry/wet effect
knob.
You’re free to install the Virus into your
studio environment and use it as an
effect device or signal processor. For
example, simply connect its external
inputs to any available aux send bus or
effect send on your mixer or to the individual outputs of a sampler or other
sound generator. This setup lets you mix
sundry signals outside the Virus and
patch the mixed signals into the Virus for
further processing.
01111111111111111112
1 DELAY
EffectSend
73≤
61111111111111111154