Download Visonic POWERMAXEXPRESS - INSTALLATION 2 Specifications

Transcript
PHONE WIRING
Connect telephone cable to SET connector and telephone line cable to LINE connector (through the desired wiring cable entry).
PHONE WIRING IN NORTH AMERICA
8-POSITION
RJ-31X PLUG
RJ-31X JACK
GRAY
GRAY
1
RED
2
3 4
RED
RJ-31X
GREEN
7
BROWN
6
5
LINE
FROM
STREET
HOUSE
PHONES
GRN
BROWN
RJ-31X
CORD
PGM & ZONE WIRING
PGM output
Vmax=30v
Imax=100mA
Tamper
Relay
Device
External
power supply
5 - 30VDC
2.2 kΩ
Alarm
Note: Do not use mains cable other than that supplied by the manufacturer (3 m long).
Figure 3.2 - Wiring
WARNING! When plugging SIREN & ZONE terminals
back into place, be sure to align them carefully with the
pins on the PCB. Misaligned or reverse insertion of
terminals may damage internal PowerMaxExpress circuits!
D-302989
3.6 Backup Battery Insertion
Connect battery pack as shown in the next drawing.
7