Download Visonic POWERMAXEXPRESS - INSTALLATION 2 Specifications
Transcript
PHONE WIRING Connect telephone cable to SET connector and telephone line cable to LINE connector (through the desired wiring cable entry). PHONE WIRING IN NORTH AMERICA 8-POSITION RJ-31X PLUG RJ-31X JACK GRAY GRAY 1 RED 2 3 4 RED RJ-31X GREEN 7 BROWN 6 5 LINE FROM STREET HOUSE PHONES GRN BROWN RJ-31X CORD PGM & ZONE WIRING PGM output Vmax=30v Imax=100mA Tamper Relay Device External power supply 5 - 30VDC 2.2 kΩ Alarm Note: Do not use mains cable other than that supplied by the manufacturer (3 m long). Figure 3.2 - Wiring WARNING! When plugging SIREN & ZONE terminals back into place, be sure to align them carefully with the pins on the PCB. Misaligned or reverse insertion of terminals may damage internal PowerMaxExpress circuits! D-302989 3.6 Backup Battery Insertion Connect battery pack as shown in the next drawing. 7