Download Cabletron Systems 2E43-51 User`s guide

Transcript
CHAPTER 3
INSTALLATION
Only qualified personnel should install the 2E4X-27.
This chapter provides all instructions required to install the 2E4X-27. A
Phillips screwdriver is required to install the device. Follow the order of
the sections listed below to correctly install the 2E4X-27.
•
Unpacking the 2E4X-27 (Section 3.1)
•
Installing Options (Section 3.2)
•
Installing the 2E4X-27 (on a shelf or tabletop, or into a standard rack)
(Section 3.3)
•
Connecting to the Network (Section 3.4)
•
Completing the Installation (Section 3.5)
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
3-1