Download Multitech ISI3334/4 Specifications

Chapter 2 - AT Commands, S-Registers and Result Codes
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
O
n/a
n/a
Exit Command Mode and go into On-Line
Mode.
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
P
n/a
Tone Dial
Modem will pulse-dial numbers following the
P.
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
&Pn
n = 0 or 1
&P1
&P0 selects 60-40 pulse ratio.
&P1 selects 67-33 pulse ratio.
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
#Pn
n = 0, 1 or 2
#P2
#P0 selects no parity.
#P1 selects odd parity.
#P2 selects even parity.
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
Qn
n = 0, 1 or 2
Q0
Q0 means Result Codes sent.
Q1 means Result Codes will be suppressed
(quiet).
Q2 means Dumb Answer Mode.
COMMAND:
VALUES:
DEFAULT:
DESCRIPTION:
&Qn
n = 0 or 1
&Q0
&Q0 selects Multi-Tech command set.
&Q1 selects AT command set.
21