Download Bullit DVD7200BT User manual

DVD7200BT
ENGLISH
Audio settings
Menu entry
Analog audio
settings
Digital audio
settings
Dolby digital
settings
Equalizer
settings
3D Effect
settings
HDCD
Function
Here you can set the format in which the DVD sound should be played back.
STEREO = analog stereo signal RIGHT / LEFT = Dolby Pro Logic stereo
signal (2 channel sound) SURROUND = Virtual surround sound If STEREO
has been switched on, “STR“ will appear, for RIGHT / LEFT, “LTRT“ will
appear, and for SURROUND, “VSR“.
This menu allows you to set the behavior of the digital output (SPDIF). Digital
output: Here you can set how the output should be performed. “SPDF ON”
puts out the maximum available sound quality through the connection. If this
option is set, the abbreviation “RAW” will be indicated on the display. “ONLY
PCM” puts out a 2 channel stereo digital sound through the output. “SPDIF
OFF” turns off the output through the digital connection. LPCM (linear PCM)
OUTPUT allows you to select either the audio CD standard (48K) or the DVD
standard (96K).
Through this menu you can adjust the behavior of the Dolby function
according to your own preferences and determine the desired type of output.
Stereo = stereo sound, R-mono and L-mono each play back the sound only
through the selected channel. The setting mix-mono only functions during the
DVD playback with DTS 5.1. In addition, you have the option of setting the
level of the linear compression. Different levels are available to you here
(OFF, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, FULL).
Through this function you can adjust the tone color of the output sound
according to your own preferences. Through the EQ type, you can select the
preset sound settings. The menu item bass increase just allows you to
increase the bass frequencies. With super bass, you have an additional
option of increasing the bass output. The setting treble increase also allows
you to increase the treble levels correspondingly.
Through this function you can adjust the sound effects of the output sound
according to your own preferences. The echo mode setting enables you to
select one of the preset reverberating effects.
The HDCD function enables you to carry out certain settings if you are using
such a data carrier. Because of the low market distribution of this type of data
carrier, this function is turned off by default.
Page 29 of 44 pages