Download ASCOM OFFICE 25 Operating instructions

Personalizing Your Phone
CODE
☛
OK
☛
OK
☛
OK
Press the "CODE" Foxkey.
The display shows "OLD CODE:".
Use the digit keys to enter the current code.
For each digit entered, the display shows an "*".
Press the "OK" Foxkey.
The display shows "NEW CODE:".
Use the digit keys to enter the new code.
For each digit entered, the display shows an "*".
Press the "OK" Foxkey.
The display shows "CONFIRMATION:".
Use the digit keys to enter the new code a second time.
For each digit entered, the display shows an "*".
Press the "OK" Foxkey.
You hear the acknowledgement tone. The new code is stored.
Setting the Ringing Properties
This section explains how to set your phone's ringing tone properties.
Setting the Ringing Volume on the Phone while it is Ringing
You want to adjust the ringing volume.
You can adjust the ringing volume while the phone is ringing.
<2x short>
To adjust the volume step by step: Press the Loudspeaker key twice with a
short keystroke.
The highest level is followed again by the lowest level.
Setting the Ringing Properties on the Phone
You want to change the way in which your phone rings.
You can set the ringing volume, ringing rate, and ringing melody.
<long>
MENU
MENU
RING
20321611en_ba_a0
Press the Menu key and hold it down for a moment.
The configuration mode is activated.
Press the Menu key repeatedly until the display shows "RING".
Press the "RING" Foxkey.
You obtain a test ring. The display shows "RINGING VOLUME".
33