Download Schmid Watson Specifications

Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
BRIDGEMODE [ Mode ]
Sets the Ethernet bridge mode. Cf. 3.2.2
Parameter:
1
Bridging is based on 802.1Q based VLAN tags
2
Transparent bridging
3
Bridging is port-based with support for inband management VLANs, cf. 3.5.5
BRIDGEMODE without parameter will display the currently active Bridgemode.
CONFIG ETHERNET Ethernet-Port
Shows the current configuration of an Ethernet port:
LTU_01_CM> CONFIG ETHERNET ETH1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Local Configuration of Bridges Ethernet Port ETH1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AutoNegFDX
:
auto
FlowControl
:
off
Doubletagging
:
off
DefaultVlanId
:
1
DefaultPrio
:
Q1
VlanList
:
egress tagged
:
egress untagged :
1
Loop
:
Off
PrioSrc
:
IEEETHENIP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FLT [ ON | OFF ]
Bridge filtering mode (global for the entire bridge):
ON
MAC address filtering enabled. Only broadcast packets and packets with destination addresses known to be on the Ethernet segment of a port will be forwarded to this port. Address filtering is VLAN aware.
OFF MAC address filtering disabled. All Ethernet packets are transferred transparently to all
Ethernet interfaces.
Typing FLT without argument displays the current configuration
7-8
Revision: 2006-04-27