Download Magnavox 19MF301B Owner`s manual
Transcript
32MF301B 19MF301B /CD TV Thank you for choosing Gradas aide Need help fast? Read your Owner's Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read your instructions and still need assistance, www.magnavox.comlsupport or call with Manuel number) du Propri_talre d'astuces regorgent destin6es _ simphfier pas _ r_soudre votre probt_me, vous pouvez acceder Magnavox. Si despu6s de leerlo a6n necesita ayuda, consulte nuestro servtcio de asistencia en linea en lsupport www.magnavox.comlsupport produit y tenga _ avoir votre pottle de main o Ilame al tel_fono 1-866-341-3738 a mano (y n_mero I serial nombre) m a disfrutar plenamente de su producto ou formez le 1-866-341-3738 (et model DOLBY DIGITAL NODEL NUNBER le ayudargn notre aide en tigne i_ I'adresse www.magnavox.com Veillez ayuda Lea primero el Manual del Propietario, en donde encontrar6 consejos que Toutefois, si vous ne parvenez your product I Serial Magnavox. inmediata? l_utihsation de votre produit Magnavox. 1=866-341-3738 while Necesita rapide? you may access our online help at (and Model pot escoger votreconfiance. Magnavox I SERIAL NUNBER el producto de model / serial) 2 Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.comlsupport to ensure: Know these safety symbols A This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. _IL The "exclamation calls attention literature to features for which you should point" read the enclosed closely prevent operating and maintenance problems. CAUTION: TOaEDUCE THE _SK OFELECTalC SHOC_ DONOT _NOVE COVEa (OaBACK) NOUSEa.SEaVlC_LE PAaTS INS DEaEFEa SEaVlClNG TO®ALIFIED SEaVlCE _a_NNEL WARNING: with To reduce the CAUTION: To prevent Wall Hount Brand: Model Wall shock, this apparatus should wide blade of plug to wide introduire not be exposed to rain or moisture and objects Bracket Kit: Funai not injury noted liable for these correspondante types of de la prise et accidents or below. Install theWall Mount Bracket on a sturdy vertical wall. If installed onto a ceiling or slanted wall, the qV and Wall nt 32MF301B FSS Mount 19MF301B [10 Do not use screws that are longer or shorter 32 inches filled slot, fully insert. la lame la plus large de la fiche dans la borne Kit Mount SanusVuepo #: shock, match les choc 61ectriques, Bracket Recommended or electric not be placed on this apparatus. electric ATTENTION: Pour 6viter pousser jusqu'au fond. <for risk of fire liquids, such as vases, should to Bracket may fall which could result in a severe injur)4 than their specified length. If screws too long are used this may cause mechanical or electr ca[ damage nside the [V set. If screws only> too short are used ths may cause the[V set to fail Do not fasten the soews by excess ve foree;th s may damage the product or cause the product to fall, leading to an injur_ For safety reasons use 2_people to mount Mount ng Bracket. Do not mount theIV Recommended Screw 32MF301 dimension B + Washer M4x0.472" Wall Mount allows the mounting purchased: F14 x 0.787" 19MF301B The recommended when oftheqV Bracket your/V (20mm) 0.07g"(F2_mm) (12mm) K_ (sold separately) product refer to or njury to yourself or others if you elect to nstall theqVVVall Mount Bracket or mount the IV onto the Bracket on your own. TheWall Mount Bracket must be installed by experts. onto the VVall Mounting in or turned onto aVVall Bracket whle on. It may _esuft in an electrical shock injur)4 When installing the unit on the wall, allow Top: Left and right on the wall. For detailed informat on on nstalling the wall mount, the Wall Mount Instruct on Book Funal is not respons ble for any damage to the is plumed theTV Bottom: this much 11.8 inches (30cm) side: 5.9 inches (15cm) 3,9 inches (10cm) space. IMPORTANT SAFETY Read before INSTRUCTIONS operating equipment 1, Read theseinstructions, _. Keep these 3, 4, Heed al warnings, Follow a nstructions, S. Do not use this apparatus nea_-wate_ excessve 6. F. Clean only wth a dry coth. Do not beck any of the vent at op opep n£s, Instal n acco/dapce with the manufactulor's instruct ons, which could ultimately overtul-n the p_x_duct, & Do not nstsll near any heat sources such as radiators I6. TilrJStability A t_,evisons must comply wth recommended nstructions, international goba saf_,ty stand /ds for tt and stabilty properties of its cabinet design, • Do not comp_x_mise these design standards by applying • Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet Such heat terns could unsuspecting y fall f_-om the top of the set and regi£ers, stoves, or other appal-atus (inc ud ng amplifiers) 9. cause product that produce heat, Do not det_,at the safl,ty purpose of the polarized or g_x_ur,ding type pug.A polarized pug/,as I7. blades arid th/d ground ng prong, The wde blade or thtd prong arc, prey ded for your satct}4When the prey ded I8. Power Lines I9. dW_y from power lines, Outdoor Antenna Grounding An outdoor rels scerner,t of the obsolete grounded out et, Protect the power cold from being walked on or pinched Only use alSschments/accessodes manu_actu reds tus.When No, 701984, specified by the provides informatiof ing of the leadn 15, to avoid inju_-y from tip ove_ serv ce personne. wth ground ng of the mast and supporting 20. wire to an antenna d scharge unit, sze of Iocat on of antennad Object and Liquid Entry Care shoud that objects do not fJI ar, d quds Serv cing is respect to proper structul e, ground scharge unt, cor, nection to grounding electrodes, and requ mments for the ground n£ e ectrode, See Figure below, Unp ug this appa/stus during ghtning storms or when un used for long per ods of time, Refl, r all serv cing to qualified system s so as to prey de some p_otection against votage surges and built up state charges, Section 810 of the Nat onal Electric Code, ANSI/NFP/\ a cart s used, use taut on when movn£ the cart/@pa_ _tus combination 14, If an outside antenna is connected to the recevec be sule the antenn ground ng connectors, 13, antenna should be located pug does not fit into your outlet, copsult an electric at, for particularly at plugs, convenience receptacles, and the point where they exit from the ppa_atus, 11, damage and/or personal mjur)4 Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufdcture_ two blades wth one wider than the othet_ A g_ound ng type pug has two I0, pull force to the f'_ont, or top, of the cabinet 21, enc osure through open ngs, Battery Usage CAUTION [o requ red when the apparatus has been damaged n any way, leakage that may result n body such as power supply cord or plug is damaged, qud or dam48e to the unit: has be taken so am not sped prevent into the battery it,jury, p_sperty damage, been sped or objects have faen into apparatus, the appara tus has been exposed to rain o_- moisture, does not operate • InsMI a batteries correctly, with + and - aligned as marked on the unt, norma y, or has been dropped. • Do not mix batteries (old and new or cadson and Damage Requiring Service The appliance shou d be serv ted by qua ified service personnel a ka ine, e,tc,). when: • Remove batteries when the unit is not used for a long time, A. The power supply cord or the pug has been damaged; B. Obiects hdve fden, or liquid has been spilled nto the @p ante; ¢-, The app snce has been exposed to rain D, lhe appli nce does not appear to operate normally exhibits marked change in perfo_-mance; E, lhe Note 83_040 appliance has been dropped, or the enclosure damaged, to the of the be connected or CATV NEC system that provides to the _roundin8 installer :This _uidelines system reminder for proper of the building, s prey ded to call the _round C/_FV n£ and, in particulac as close to the pont of cable system nstaller's specifies that the entry as pract cal. attent on to Art cable 8round shall cie 4 FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus unauthorized change or modification RADIO-TV interference if an is made. INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the apparatus and receiver. 3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. DECLARATION Trade OF Name: Model: CONFORMITY HAGNAVOX 32MF301 B Responsible Party: Address: 19MF301 B Telephone This Class B digital apparatus complies with Canadian CAUTION: Danger of explosion WARNING : Batteries Disconnect the mains This apparatus Nake sure not X plug to shut off when should To place climbing if battery not be placed the prevent unit on the on it. A falling ike all LCD Federal injury, unit For (10cm) this apparatus that the this set contains disposal or www.mygreenelectronics.com • installed) must injury not ABOUT At east 2 peope are i-equ red wl,en carry ng this unt, • Hake sure to hold the upper dnd bottom fi-ames of the unit firmy as ustrated, • Do Do /_(. Do • • • with Mercury, information, • with mains the same or equivalent type. heat such as sunshine, fire or the like. plug shall remain or rack readily unless proper to the wall in accordance by a child death. operable. ventilation is provided. please and an adult dispose with leaning, of according the instructions. pulling, standing to all Local, or State and contact: www.eiae.org Trademark THE HAZARDS SHOCK AND OF FIRE _ , ", /_ I-iii ml Information AND ° HDFII, the HDFII Logo, and High Definit on Multimedia Inte_ffsce are trademarks or i-eglstered trademad<s of HDMI Lcens ng LLC in the United States and other countres, I']"1DOLBY _ I DIGITAL ] blanufactured under Ncense fi-om Dolby Lsborator es, Dolby and the double_D symbol am trademad<s of Doby Laboratories, \, " HANDLING Do riot nstall the unit n direct sur, light or it, a pace subjr, ct to dust or strorlg vibt _tiorl, /'wod a place wth drastic temperature changes. Install the unit n a horizontal and stable poston, Do not place anything dilect y on top or bottom of the unit. Depending or, youlexternal devices, noise or disturbance of the picture nd/or sound ms>, be generatr, d if the unit is placed too close to them. In this case, pease ensure enough space between the external dev ces and the unit, • only to excessive apparatus. even riot hndle the AC power cord wth wet har'ds. not pu} on the AC power cold when disconnect ng it flsm an outlet, Grasp it by the pug, not put your fingers or obiects into the unit, LOCATION U.S.A. RECYCLING • • • this of being tilted or • Ths unit's pdck_Jging mater s arc, recyclable nd can be reused, Please dispose of any materia s r, accordance with your Iota recyc ng regu at ons, Batter es shoud never be thrown away or inciperated but disposed of n accordar, ce with your Iota regu ations concern ng chemical wastes, • For product mcyclir_g ir_forrnaton, pease vsit www, magr_avox,com /- 7 c-,, WHEN CARRYINGTHIS UNIT _ > TO AVOID ELECTRICAL in use.The be securely attached The American Academy of Pediatrics discourages television viewing for children younger than two years of age. NOTE Replace be exposed such as a bookcase around a lamp recycling or replaced. shall not installation CA 90501 1-866-341-3738 Standard Television Receiving Apparatus, Canada BETS-7/NTNR-7 or or more is capable can cause serious products, laws. ICES-003. find trouble in a built-in furniture Number: is incorrectly pack or battery to leave a space of 4 inches WARNING: Do (battery FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, Depend ng on the environment, the tempe/ature of this un t may increase s ght y,This is not a ma fur, or on. Be sure to unpug the AC power cord flsm the AC out r,t before moving or carry ng the unit, Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • [he t-ome ti_ealerenle a nr<-entexper ence s a growh'g rend and large flat panel displays are popular purchases However, flal panel displays are not always suppored on the proper stonds or inslalled accord ng to the manufacturer'srecommendalions • Flat panel displays that are inappropriately s tuated on dressers,bookcases, shelves,desks, speakers, chestsor carts may fall over and cause injury THIS MANUFACTURER CARES! • Tt'e consumer electron cs induslry is committed to r,,aking home enterta nn"ent enjoyable and safe TUNE INTO SAFETY • One sze does NOT f all Follow the r_anufacturer'secommer_dations for the safe rTstallotionar'd useof your flat panel display • Carefully read ar,d ur,derstar,d all er,closed instructionsfor orooer useof this product • Don't allow children to clmb on or play with furnitJre and telev sion sets • Don't place flat panel displays on turn tare that can easily be used as steps, such as a chest of drawers • Rememberthai children can become excited while watching a program, especially on a "larger tha_"life" flal panel display Care should be iaken to place or install _hedisplay wf'e_e it cannol be pushed, pulled over, or knocked dowr" • Care should be taken to routeall cords and cables cant'eared to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING: IF YOU DECIDE TOWALLMOUNT YOURFLATPANELDISPLAY, ALWAYS: • Use a mountthat has been recommended by he display _anufacturer and/or Ised by an ndepe_'dent laboratory (suchas UI, CSA, Erl) • Follovvall inslructionssupplied by the display and wall mount manufacturers • If you have any doubts abou your ability 1osately install your flal panel d splay, contact your retailer about professonal installaton • Make sure that the wall where you are mounting the display s appropriate Some wall mountsare not designed to be mounted to walls with steel studs or old cnder block construction If you are unsure, contact a professional nstaller • A '_qnimumof _o people are requi ed for ins_allaton Flal panel displays can be heavy www.CE.org/safety 6 INTRODUCTION Features DTV/TV/CATV You cars use your remote contro to seect channels whch are broadcast in dgiM format and convent ona ar,aog format.Also, cable subscribers can access ther cable IV channels, Contents Important Safety Instruct ons h-ademark Information 3 4 5 Child Saf_,ty Featul es Supplied Accessor es Symbos Used n ths Mdnual Attachin S the Base Mounting the Unit on Your Fumture Remote Control Function Installing the Batter es Contro Panel of the 6 7 Ntis unit automat cal y scans and memorzes channels avai abe it, your area, e m nat ng d fficut setup pl_cedures, 7 7 Child Loci< This Matul e allows you to block ch drorl's access to indppropr ate 7 8 8 9 lbrmina s 9 PREPARATION Cor'nr'ction Connectior, nbrmation Autoprogram INTRODUCTION Antenna Information Display (/XT SC only) You can disp ay the tire, contents and other current DTV pl_gram on theTV screen, to Cable Receiwr or Sate te Box Plug In the AC Power Cord 10 I0 pl_grams, Closed Caption Decoder Built n cosed caption decoder disp ays text for closed rapt on supported programs, MTS / SAP Tuner Audo cars be selocted fl_m the remote contro, Auto Standby If there s no input sgnl and no operat on for I5 minutes, the unit will go into standby mode automaticall)4 I0 11 Sleep Timer You can set the unt to go into standby mode after a specific amount of time, Sleep limer Switching Each Input Mode Freeze Mode Chdnnel Select or1 12 Choices 12 Stereo TV Screen Dispby Mode Sound Functions TV Screen Information 13 13 14 ECO 14 14 PLL Frequency Synthesized Tuning Prov des flee and easy channe se ection and r,ts you tune di_ect y to any channel usng the number and dec real point"," buttons on the remote contro, Initial Setup WATCHING fun-Link TV Options 12 12 USING FUNCTIONS Picturo Sound for On-screen Language Select your on s@een anguage: Eng sh, Span sh or French, Sound Function Various Adjustment for Picture and Sound Customizes mage quaty suitable fur your- room and sets your sound prefiw, nce, 16 fun-Link Setup Featul es 16 17 18 (HDMI Cable not Included) fun L nk alows your other HDMI link dev ces to be contro the HDMI cable connected to yourTV, Ldnguage USB 23 HDMI 24 HDMI-DVI CONNECTING DEVICES External Device Connect on 25 via HDMI Link Input Input If your vdeo devce hs DVI output jack, use an HDMI DVI convers on cabe to connect the unt, ComponentVideo USEFULTIPS PC FAQ 28 5-oub eshoot n£ Guide 28 INFORMATION AV Input USB Terminal lhe picture @PEG) and vdr, o (Mot or1 jPEG) files storod on a USB storage devce can be pdyed back on this unit, 30 30 Digital General Spec float orls 3I <1961F301 E ectrica 31 Specification Input Input Glossary Maintenance Other Specifications Limited Wan-arty ed by Audio Output B only> Headphone Audio Output 3I 33 © 2011 Funa Electric Co., Ltd, All rghts reserved, No part of this manua may be reproduced, copied, transm tted, disseminated, transcribed, downloaded or stored n an7 storage medium, n any form or for any purpose without the express prior wrrLt_,n consent of Funa, Ful thermore, any unaufl,orizc, d commerc al distlibution of ths manu or any revison he/eto s stricty pl_hibited. Information in this document s subject to change without any person or o%ar, ization of such changes, FUNAI with the t_ o_ Funa. All other construed s glint any other content notice. Funai reserves the right to change the content heron w thout the obligat on to hotly design s a legistered trademad< of Funs E ectr c Co., Ltd, and may not be used n any way wthout the express wr tten consent trademad<s used heron reman the exclusive property of ther respect ve owners, Noth ng contained n ths manua shoud be ng, by implication or otherw se, any license or rght to use any of the trademarks displayed herein. Msuse of any trademarks or in this manua is strict y prohibited, Funi shall aggressive y enforce ts ntr, ectua property rghts to the fullest extent o_the law, MAGNAVOX is a i_gistered trddemdrk of Philips Electronics North America Corporation Inc under cense flom Philips Electronics North Am@-cd, and isused by Funai Electric Co, Ltd, and Funai Corporation, Supplied Accessories Owner's Manual Quick Start Guide Registration card Attaching the Base You must the attach unit, Be sure the direction, 1 base to the unt and rear of the front At least 2_people Check the text bolCom base match the are requ red for these "FRONT" to ensure to have it as a table w_th "an ow" t is being installed steps, on the n the top proper Base's correct direct on, Spread a thck and soft cloth over a table as shown at step 2, Place the man unit face down onto it, Make sure not to damage the screen, Remote Control TV base and 3 screws 32MF301B M4 x 14 (NF805UD) Batteries 19MF301B M4 x 12 2 Insert 2 hooks the bottom unit nto then of the main base holes (shown (AAA, 1.5V x 2) i!i_ii!; under by arrow move the d;,), base in the direct on as shown by arrow ,'.2.'until it stops and the screw holes are aigned. b'lal<e sure not to put the AC power cord between the base and the unit. 211 3 Drve Ph Ilips head screws nto threaded [4o _' bottom If you lose the Phips head screws If you r, eed name or No, support V_el to at your the sure the contro purchase Iota on the cover _e_o for We do not £uarantee romote contro s, es, please code to the more dora 100% call our of this e col Re@r above merit oned 3 of the base until they are tght stole, accessor component brand, the luss atior, s and a unverss s set to our romote please i ep ace these with ne found s_£ Nake scrows, the holes at the or, refer toll to flee the part customer manual, ro your manua o opIse rhs universa _s i emote accompanyln£ Ion,hove b, basefo_ /s _r_ • Unscrew the Phillips head screws in step 3, After the screws alO removed, pul the base up toward the rear of the unit, Be ca1_'fu not to drop the base when you remove It, i!i"i_ control your s. nteroperabilty wth all universa Symbols Used in this Manual The following manuak s the Description : D gital]V ctescr ption refers for the symbols used n ths to: operat :AnaJog/CableTV Mounting the Unit on Your Furniture on Screw operation this unt supplied) If neither both, symbol appears, the operation s applicable in the on your furnture hole at the t ghtiy back of the usng wood screw (not base as shown. to [ • Recommended screw dimens on : 3/16 x 3/4 inches (5,1 x 20 mm) rear of this unit hole 8 Remote Control Function ,,,_ p.11 (_(power) Press to turn the 3o completely power unit on and go into standby turn off the unit, you must mode. unplug 1 2 SAP ,,i_ p.13 2 3 3 SOURCE ,,i_ p.12 4 FREEZE Press to freeze film.p.12 S OK 6 A/V/_/I_(cursor) iiiii_ p,11 7 BACK IIII1_ 8 VOL 9 PREV CH screen image. llllI_ p.11 _ +/- p.14 IIII_p.13 IIII_ Press to return to previously wewed p,12 channel. 10 SLEEP 11 FORMAT IlII_ p.13 Press to select aspect rs_o s_u ab e for the TV screen. 12 RED/GREEN/BLUE/YELLOW I unctionally useful for fun llI@" p.12 ,,,_p.23 Link, 13 MENU IIII_ 14 INFO Jill p.14 15 REV ,_II!FWD _ _ress to search ,D backward °_ess I0 begin tne of the 17 18 I0 ]ls£ .i_ "d or forM/a_ p.23 chaDtel-< titles or msc J p.23 ,,. p.23 • _dSS tne aisc pla/OaC t PAUSE II S_ess io pause The alsc olaYDaCK STOP p.23 ,,,, p.23 SKIP I_I_I/SKIP _ Dress to SKID OaCKWa tracks p.lS or forvva _athrOUgh PLAY I_ 16 the AC cord, SZOD lne aisc DI_ 'DaCI MUTE illi_ p.13 CH illi_ p.12 +/- ECO illi_ p.14 Press to reduce power consumption, 19 Installing the Batteries Install the batteries indicated insde (AAA, battery 1,5V x 2) matching compartment of the the polar ty remote control, • Be sure to follow the correct polarity as nd cated in the battery compal-tmept, Reversed batteries mdy cause damage to the device, • Do riot mx d fferer,t types of batteries together (e,£,A kaline arid Carbon Zinc, or rechargeab e bstteries lib' r,i cad, nrrfls _,tc) or o!d batteries with fresh ones, • If the device is not to be used f_r a Ion£ period of time, remove the batteries to prevent damase ol- njury from possible battery leakage. • Do not try to recharge batLer es; they can overheat and iupture, Number buttons IIIII_ p.12 • (dot) Press to shift the subchannel from the main channel, 20 "Fun'L,nHOPTIONS_ ,i,!. p.14, 23 Press to call up various menu from your fun Link device connected through an HDNI cable. Control Panel 1 VOLUME +/,,_ p.13 Press to adjust the volume up/down or move rigbt (+)/left (-) through the main menu terns, 2 CHANNEL +/,,,,_ p.12 Press to select channels or move up (+)/down through the main menu items, 3 MENU ,,,_ p.15 4 SOURCE ,,,,,_ p.12 (-) :2i !iq 5 (!) POWER ,,,,,_ p.11 Press to turn the unit on and go into standby mode. [o completely turn off the unit, you must unplug the AC power cord. 6 Infrared Standby 3 4 flashes i from the remote {% indicator Lights up red when 5 &i i!i!i i i/ sensor window Receives inflated rays transmtted control. 1 / when the unt is n standby the unit goes nto standby mode and mode. !2! Terminals Side Panel (i;, D 13 9 AnalogAudio (L/R)Input Analog Audio PC Connection/Analog 14 10 Antenna 26, 27 !i!i!i!! Audio (L/R)jacks signal or (L/R) jacks signal or Audio (L/R) jacks signal or Audio the Input jacks.When the Audio is only connect to the Audio L input jack, Input jack n,,_ p.10 <32MF301 B only> 11 USBTerminal ....• p.27 Use this term nal only to play back the picture (}PEG) and video (Notion jPEG) flies stored on a USB storage device. 12 HDMI 2 Input jack <19MF301 B only> 13 HDMI (HDMI-DVl) n,_ p.10, 25 Input jack ,,,,_ p.10, 25 14 Headphone Audio Output jack Headphone connect on for personal listen ng. Rear Panel 15 AC power cord 16 Digital Audio 17 PC (VGA)Input ,,,_ p.10 Output jack jack <32MF301 B only> 18 HDMI 1 (HDMI-DVl) ,,,_ p.26 ,,_ p.27 Input jack ,,,,_ p.10, 25 <19MF301 B only> 19 USBTerminal to do the software update themse ves, Use this term video (Notion i!;' (L/R) jacks signal with mini plug conversion cable jack on PC. Audio (L/R) input jacks are right below ComponentVideo monaural, then lO 25, signals fi'om ComponentVideo/Analog HDMI DVI/Analog Audio CompositeVideo/Analog stereo Analog (3' ii;_i{ jacks ,,,,,_ p.10, Connect 15 i{i! 8 Component/CompositeVideo Input jacks forVIDEO ,,,,_ p.26 CompositeVideo input jack is shared jack wth ComponentVideo input (Y)jack, ,,,,_ p.27 nal only to play back the picture (}PEG) and jPEG) _les stored on a USB storage device. _ _.... 10 Connection to Cable Receiver or Satellite Box PREPARATION Use an HDbql or ComponentV ComponentV deo input HDPll or the ComponentV deo output if/ou Be sure your Delore antenna plu,_gng connect connect you connect: or other In the AC device _ower s connected properl/ cables to connect or the race ver/satellite Before deo HDMI the unit to the jacks of the cable box. to the Analog jacks right jacks of the unit's ComponentVideo Audio below input cables to the Analog the ComponentVideo jacks, Audo L/R input connector jacks. satellite dish cote1 cable TV signal including PPV Antenna Connection Connect the _[/_enna IRDU_ ack of this unit Rt coa×lal cable o _our home outlet to the RF coaxial cabl_. VHF/UHF DTV antenna analog or ® ® ® ® ® e ® _ompone .... (red/blu6/green) and audio cables ®®®® cable receiver/satellite _.F coaxial cable box ® $ For 32NF301B, you can also use the HDNI jack on the Rear Panel. You can also connect box other than the or CompositeV have different cable TV signal Once nitial connect setup. Channel memorize ,,_ ons are completed.turn all available on the scann ng s necessary channels n your unt and begin for the unit to area. [Initial Setup] p.11 this unit to the HDMI deo output output cable receiver or satellite or the ComponentVideo jack (n,_ p.26) output jacks. Requ red cables and connecting methods of the cable receiver/ satellite box, or the ava lability channel for the dear QAbq dffer depend jacks because they might ng on the cable/satellite may prov der or IocaF[V broadcasler: For more nformation, or local IV please contact your cable/satellite provider broadcasten No_, If you have any quest on about the ©TV's antenna, vsit Noe www.antennsweb.o% for further nformation. Depending on your antenna system, you ms>, need d fierent types • Use an HDPII cabe with the HDPll logo (a ca/tiffed HDbll cable), of comb nets (mixers) ol- separators (sp tters) for HDTV signa the rain mum RF bandpass or, these devces is 2,000b1Hz ol- 2GHz. For your safe,t>, nd to avod damage to this unt, please unpu£ the RF coaxa cable flsm the antenna input jack before movng the unit. If you did use an antenna to rc.ceve ana ogTV, t should aso wofl< for DTV mcept or,. Outdoor or stt}c antennas w be more eff_,ct ve than a sot top or inside antenna. lb switch your mcept on source easily br,tween antenna and cabe, nstall an antenna selectoE If you a_r, not receiv ng a sgna flsm your cable serv ca, contact the Cabe prov dens Hgh Speed HDISl cable s recommended Plug In theAC Nake sure that outlet after all the for the better compat bi i% Power Cord the AC power necessary cord must connections be plugged to an AC are made. C_ut o/: Do not connect the AC power colx) to a powor suppy outs de the nd catr'd vo}tage ofths unit (AC 120V). Connect ng the AC power cord to a power suppy outs de of this range may re,sut in fire or eectr ca shocks. Noe Each timr, you pug n the AC power performed colx:], no operations for a f_,w seconds.This is not a malfunct on. will be 4 Use _1/1_ to select the desired location setting, then press OK, Initial Setup 7his section which wili guide you through ndudes selecting and autoprogram, v ewabie Before Hake 1 which tally setting on screen menu scans and memorizes you begin: sure the After unt is connected It may take first time. • [Initial Setup] menu unt is turned on. A/V ]V a few moments appears to turn automatcall7 unt for the through to your after the to select [Antenna] for channels, then store, the unit will be set up with from s) on the rght a choice of picture and sound quality accord preference. Use this setting to remove the E St cker fvis the the ble from nitial memorized the sde of the the setup channel displa}4 ,,_ is completed, with the ng p.23 the lowest confirmation Iocat on sett ng will be d splayed message on the IV of screen. You must set [Home] in step 4. Otherwise, [Picture] and [Sound] settings you adjusted will not be press OK. Use A/V [Retail] predefined setting for retail d splays. Select [Home], the unit s set to maxmze the energy efl]c ency for home setting and t can be adjusted on the to select the on screen language screen, then Select When (Engl sh / Espa_ol/Franca C,_[V or cable. connections, on the unit, • Use to antenna making all the necessary choices 3 automat unit's nital for your channels. press _ to turn 2 the a language forIV channels or [Cable] memorized after the unt goes into standby mode. press OK. If you are, not receiv ng a sgnal fl_m your cable serv ce, contact the Cabe prov de_: If you Dess _ or MENU durng channels w be canceed. The init al autoprogram autoplsgram, ths setup of TV function can be exr, cuted for ether [Antenna] or [Cable] ony once.When you change the connect on (Antenn / Cabe), set [Autoprogram] gan. ,,_ p.17 If them is no signa input fi-om the antenn terminal and no operat on for several seconds after you turn or, the unit, he pful hints appears. Follow the instruct ons isted on theTV • [Autoprogram] screen. wii] begin. After an initial setup is completed... • If/ou want to scan the channels [Autoprogram] • You can add the unmemorized [Add desired to change [Language] • If you want [Location] cable and analog by autoprogram. Channels] • If you want automatically again. nlmi,p.17 n,_ p.18 to another language. n,_ p.23 to change the location n,_ p.23 setting. channels i_i;ii!_i 12 WATCHING Note • [No Signal] broadcast • TV w+l appear on the lV screen after the subchannel s ovr,_: [Audio only program] roceive orgy sound message sgna, w appeal- or_ theTV scroen, wher_ you 14 TV Screen Information You can d splaythe nformation In the digital mode, for the current program 1 currently such as the off the gGdes selected audio the ECO channel mode detailed on the broadcast air channel or other You can turn TV screen, ng nformat such as program on ttle on ECO Press ECO power and once Node to conserve to turn powen on ECO Node and reduce offECO Node. consumption. Press ECO again to turn are displayed. Press INFO 1 2 Note • You must set [Home] it, [Location]. ,,i- p.23 Other/se, the sett n% you adjusted will not be saved when the unit goes into standby mode. -9 -10 fun-Link Options If you have our brand recorder them 1 programttle 2 progrsm (lhe 3 broadcast 4 channel 5 audio guide added Before you begin: You must set [On] Control]. ,,_ ths such as Blura 7 player with via an HDNI terns flora fun cable or DVD ons, connect so you can simply operate unit's remote n [Device Link funct control. Control] and [fun-Link p.22, 23 Otherwise, _un-L,nH even connected _l_b_}oyfmL to broadcasting is d splayed to a max mum of 4 lines.) OPTIONS our brand _' devces does not work to this unt, nd dnv::ns MAGNAVOX staton language fl< vn_find fo}}ows number (AIgC)/audo mode [SwitchingAudio Node] 6 effective lines and scan mode 2 TV 8 program's 9 CC (not scanning (N]SC) avalable NB620gL2 NBP2100 NRD410B NB620$L1 rapt NB6?_1 SLI P_ess fun-L,n_ [fun-Link ratio if dosed NRD723B NBP5130 1 image aspect SYLVANIA NBP5230 NBP5120F n,mi.p.13 format chid to this unt various fyou products are compatible guide program information 10 that OPTIONS Options] _ to display menu, on is set to [Off]) lock ratng Devwe-menu 2 Press INFO or BACK _'_to hde the nformat on. Note When the pro%am zude corls sts of more tf,ar, 4 nes, use •/• to sclm to the next/previous Ines, [No description provided.] is displayed when the program £ude is not provided. While the program £ude is d splayed, the closed caption function is interrupted, In externa input mode, the follow % screen is disp syed; e.g,) When an external devce s connected to Video Input jack, Device-menu This functon alows you to cont_sl the menu of ,our connected fun-Lnk device, Devicecontents This funct on alows you to contro of your DVD or Blu r_y discs. the top menu Devicefavorite This funct on aows you to contro menu of your Blu ray discs. the popup 2 Use A/T/OK the des_ed The informat on d splay will automatica y disappear n I m nute, on this unit's _emote funct ons for your devices. control to operate 15 12!i USING FUNCTIONS Ibis section describes d splayed when ]be main menu tbe overview of the main S menu i__ '!, iii! you press MENU, consists of the function sett ng tems below, :2; 1 Use A/V Press MENU to display the main menu. to select a desired press OK to determine menu and an _tem, then the setting. Page 16 Adjusting picture the p cture quality mode, as your or customize !iiiii Adjusting other Page 16 the sound sound mode, equalizer Page 17 Scann ng the channels see what the antenna available n your levels are. _atures parental _nguage_ You can choose language. Page24 You can view When and English, Spanish, or French _B 3 gude Page 23 on screen files area and Page 18 Adjusting the Closed Caption, some other useful funct ons. jPE(}) and some functions. _tUp as your the preference, p cture stored the setting (]PEG) and video on a USB storage s completed, (Notion devce. press MENU to exit. 16 Before you begin: You must Otherwise, n [Location], the settings after the 1 Before set [Home] unit goes nto Use i,/y ,,B p.23 you adjusted standby to select the win not be memorized mode. after the item you want to adjus%then press 1 following items, 2 Smart Picture i/Y unit goes Use des red sett ng, then [Standard], [Sports], Brightness, Contrast, Color Temperature You can only adjust the [Personal] Adjust in [Smart [Movie], Color, Use press OK. i/• use _1/1_ i/• following opt ons when Use Picture], to select the des red sett ng, then to adjust the sett ng. _1 press OK.Then Cursor to ncredse brightness Contrast to decredse contrast to ncredse contrast Color to dea c,ase coot intensity to naease ntensty Tint to add red to add green Sharpness to soften to sbal-pen to ddd wdrm colors to add coo colors to select the item you want be memorized to adjus%then press Temperature V rtual Use Noise Reduction of the to select the Use picture. desired option, then press OK, Off [hs function in grdy,) s d sabled when [Movie], setting, then quality each frequency. [Music], press OK, and [News]) for specific level,then press OK. Surround Sound surround i/• sound your and use i/• gives you the stereophonic existing to select the frequency 2_channel desired stereo opt on, then to w_tual system. press OK. coot Votume function theJV nose desired [Standard], space through Ths the terns. _1/1_ to select the Auto Color • win not mode, to select the tonal Virtual • to decredse brightness t°° standby you set to Brightness i/• ,,B p.23 Equalizer Tint, Sharpness, Adjust Cursor Use nto the f01iowing ([Personal], and [Game]) adjust the Reduces i,/y n [Location]. sett ngs you adjusted Smart Sound to select the ([Personal], Use the OK, Adjustthe Use set [Home] Otherwise, OK, 2 you begin: You must PC ir,put is seected, (Sett ng will be t Leveling keeps commerc i/• a constant als and the to select the loudness d fferential between programs. desired opt on, then press OK, TV Speakers Select the amplifier Autoprogram aucto output s HDbql an HDbq volume cable link function A/• speakers, sound operations option, then by such as unit's remote is set to [On]. desired or not. If your ble and connected by usng ths Control] to select the unit's compa£ to this unit, some up can be changed Make sure [fun-Link Use from the control. If you switch move the you restore the D]V to use Autoprogram The sound wil be output The sound wil not be output fi_om the unit's speakers, and C/_l V) or nitial f you setting, or f channeB you deleted, t s recommended to perform a new channel search. 1 Use &IV to select [Autoprogram],then 2 Use A/• to seJect an appropriate press OK. flsm the unt's speakers. option, then press OK. You can contro audio output fix_m your connected HDMI nk devices by usng this unt's remote control. Ext. Amp Primary MTS You can set the • When connected toVHF/UHF • When connected to C/X[V, • [Autoprogram] output mode as a default for the sound antenna, select [Antenna]. select [Cable]. will begin. mode only). This sett ng is not Use antenna area after the press OK. Off mode (e.g. between n,=. p.22 On (NJSC wires unit to a d fferent nterlocl<ed when by press ng SAR [Sound &/• to select the IOutputs Mono st.... IOutputs SAP you change Functions] desh'ed mol,o _d option, the output n,=, p.13 then press OK. Judw. aud o program. • When tup lowest the scanning memorized and memorzing channel will are completed.the be d splayed. Noe Before you begin: Make sure the unt is connected to antenna or cable. Use •/• to select the item you want to adjust, then OK. press After sett n£ [Autoprogram]. using CH+/on the remote contro skips unavailable pro%ares automat Cd }4 If yOU are' not receiv ng a sgnal flsm your cable serv ce, contact the Cabe prov de_: If you press (_ or MENU durng autoplsgram, the setup of TV chdnnels w be canceed. Even f [Autoprogram] s completed, the channe} st,ICing w be oat fthe AC power cord s unplu%ed br'_ore the unit goes nto Autoprogram star'dby mode by press n£ _). The PIN code wll be requ red once you set a PIN code n the [Child Loci<i. ,,,,_ p.20 If you want to change your PIN code, foow [Change PIN]. ,. p.21 2 Ad]us_L the following items. the nstruction of ;i 18 Channel List The channels channels [hose 1 2 Antenna Confirmation selected here can be skipped when selecting the using CH +/-. channels can s_LIIbe selected with Use A/V to select [Channel Use A/V to select the channel the List],then Number buttons. press OK, you want to remove, then [hs funct on lets you check the digital sgnal strength of each channel. 1 Use _- Use the Number channel for which press OK, A/V to select [Antenna], buttons then or CH +/- press OK. to select the you want to ched< the digital signal strength. • 7he channel d splay for the removed You will not be able to select the CH +/-. • [b reactivate OK. fhe • When a removed reg stered 7ou remove removed channel, channels a main channel channel darkens. again usng use A/V and press are highl ghted. channel, its subchannels are as well, • If the charlne is set to analog channel or ext@nal it,put, you cannot confirm the antenna condt on, No/e • The channe Othewse with the the [DTV] channe Jrld cated on the d splay JsKTSC, s NTSC, Add Channels [his function Cable channels to reception 1 lets you add the offthe that were conditions air along NISC not added by the at the intal setting. or analog autoprogram Use A/y OK. to select the item you want to adjust, then press due Closed 1 Use _- Use the Number channel you want to add, then Air to selec± [Add buttons Channels],then to enter press OK. the number press OK, of the Caption Closed Caption Note • [Digital Caption Service] that you can swtch the broddcast descr pt orL You can view closed captioning (CC) forTY programs, movies and news, Closed caption refers to text of dialog or descript ons displayed on screen, Use A/• d ff_,rs depending on to select [Closed Caption], then press OK, See the following description for setting each item, ::iiiil {iq You can change A B C _/_ ..... ..... ; ,, 1 Use A/• to select [Caption 1 Use A/V to select [Caption 2 Use A/• to select [User 3 Use A/• to select [On], 4 Use A/• to select an item, then 2 Use A/• to select the desred then closed capt press Style], color then Setting], then or sze, then press OK, press OK, press OK. to select the des red setting Picture Service], style such as font, etc. A/• _}_ the caption (•} press OK. Then use and press OK. display OK, on, then press OK, Off Seect fyou CC-1 and T-I [he pr mary capt on and tt, xt serv£es,The capt oning or t_,xt s displayed in the same language as the program's diaog (up to 4 Ines of scnpt on the [V screen, where _t does not obstruct mloval¢ parts o_the picture,), CC-3 and T-3 Serve as the pref_,rmd data channels, The caption % or text is often a secondary language, CC-2, CC-4, T-2 and T-4 • [here do not want caption service, are 3 display modes accord Disp ays input chal_cters immed ately, mode Roll-up • Revew the Font the 1 2 to the basic closed caption, called d gital capt on servce. D]V Use ths choce show the made of the below displayed differences or by iooldng setting in box (not selected). Font Size -Font Color Cosed capt on ng for't stye, sze, color and opacty can be changed, Font n memory, they are Opacity ng Background Edge caption setting right corner Opacity Font Style Background In addition your upper all selections ng to programs: Disp ays the cl,aracters cont nuous y by scro (max, 4 nes), mode !_ (Background Color and Background Transparency) on the TV screen Once ch ratters are stored d splayed al at once, and EdgeType) Backgroun_ Rasly ava lab e and broadcasters use them ony in specia condtions, such as when [CC-1] and [CC-3] or [T-l] dnd [m-3] dre not avdilab e, Paint-on mode Pop-on Edge (Edge Color Font has its own closed menu to change sett rigs for d gital capt on servce. Use A/• OK. to select [Digital Caption Service], then press Use _/• to select the desred dgtaJ caption service, then press OK, Off Select if you do not want digtaJ caption service. CS-I to CS-6 Select one of these before changing any other item n [Closed Caption] menu, Choose [CS-1] under normal circumstances. Color Background coor Background Opacity dispayed caption can be switched. dnd opacity oftl,e Edge Color Edge color and type of the dispayed Edge Type caption can be switched. 2O No_e Closed capt on will not be displayed when you are using an HDNI connect on. To show the closed caption on your 1V screen, broadcast signal must contain the closed caption data, A B c Not all TV pr%rams and commercials hdve the closed caption or all types of the closed caption, Captions nd texts may not exactly match theTV voice, Changing channels may delay the closed caption for a f_,w seconds. D Adiusting or muting the volume may delay the closed caption for a f_,w seconds, Abbreviations, symbols and other grammatical shortcuts md7 be used in order to keep pace with the on screen action,This is not a malfunction, No_e When you select a I_tng nd set it to [Block], the hgher/atngs will be blocked automatca }4The owor 1at ngs w be avaiabe for The caption or text characters will not be displayed while the main menu ol-functions d splay is shown, If a black box appears on theTV scl een, this means that the closed caption is set to the text mode,]b tear the box, seect [CC-1], [CC-2], [CC-3], [CC-4] or [Oq, If the unt rece yes poor quilt 7 telev sion signa s,the capt ons may VlOW contain en_rs, ol-there might be no captions at all. Some possible causes of poor quality signals am: Automobile ignition noise Electric motor noise The chd lock sel_ ng will be _,ta ned after a power tJilul e or after the power s mmow, d for !o%er thn I0 seconds (except the PIN code reverts to 0000), [Child Lock] ,,,,Bp.20 If the ratng is b ocb, d, @ w appea£ [Region Ratings Lock] w be avai able when the unit receives a digital broadcast using the new i sting system. For the Unted States, the unt may download the Region Ratings W_,ak signa reception blult plex signa leception (ghosts or screen flutter) Data dropout and Pix_,}ation (for DTV ony) The unt i trains the cosed capt on setL ng if the power MIs. When the unit receives special effects psyb ck signal (e,g, Seal_h, Sow nd St) fi_om aVCR's video output channe (oh3 or oh4), the unit may not display the correct Ng, When you set the highest rating to [View], all ratings turn to [View] automat cal y, 1o block any in@propr ate programs, set your mrs n [US Movie Ratings Loci<I, [US TV Ratings Lock] and [Region Ratings Loci<I, Lock l_be, f requ rod, The Canadian rati% systems on this unit am based on CEA 766 A and CR[C pocy, caption or text, Child Lock Child lock reads the to the ths programs function, for children rati%s whch for exceed you can block programs, then the rati% level you set.Wth certain and any channels denies programs or external access Use A/• to select [Child Lock], then channels funct on. modes Use the your Number buttons to enter press OK. 1 Use &/¥ to select [Channel _- Use A/• to select the desired the 4dgt numbers for $1 [HDMI to switch 1], [HDMI 2 [Component] video cables set up your • When is correct, the PIN code [Child Lock] menu in between Lock], then rati%, [View] press OK, then press OK and [Block]. pu xhased instead o 2] will be displayed to ths unit. f you connected component is US Movie descr ption can be invisible PIN code, displayed. See the foilowin£ modes These may di%r depending on what product you For example, 19NF30I B will be displayed [HDll] PIN code. • When you have not enter 0, 0, 0, 0, input can be _epeatedly 2 or external nappropriate input nv sible. 1 Particular ths for setting ratings lock is the rating system created by MPAA. each tern. 1 Use OK. &/• to select [US Movie Ratings Lock], then press 21 2 iiii!,!'_! Use i/V to select the desired repeatedly to swrtch between rating, then [View] i7 press OK and [Block], Sub Rating Rating Category FV Fantasy V olence V V olence S Se×ual Situation L Coarse Language D Su%estive Dialo£ Rating T_Y7 T_NA T_14 T_PG Category X Mature aud ence ony NC-I 7 No one under I £ admitted R Restr tied; under 17 requu es accompany % parent or adut £uardian PG-I 3 Unsu tab e for chil@ en under 13 PG Parental £u dance su££ested G Genera NR No ratir_£ • Blocked sub rati% w T_I 4,T_PG appear besde the map rating category in [US TV Ratings Locl<] menu, • You car,not block a sub ratn£ (D, L, S orV) if the main ratng s set to [View], • Chang ng the cdtegory to [Block] or [View] automdtCd y changes aud ence al its sub rdtn% to the sdme ([Block] 1 Use i/T to select [USTV 2. Use •/V / _1/1_ to select the OK repeatedly to switch Ratings Lock], desired between then press OK, rating, then [View] press or [View]), Although thede ult PIN code/0000/ supplwed th theunit you can set your own PIN code. and [Block]. 1 Use 2. Press the Number •/1!' to select [Change buttons PIN], then press OK, to enter the new 4 digit PIN code. • Enter Rating Category TV-MA Nature aud ence only TV-I Unsu tab e tot child1 en under 14 4 higher TW-PG Parental £u dance su££ested TV-G Genera TV-Y7 Appropriate older fur a chdmn TV-Y Applopriate fur a chdmn aud ence s÷ / £ and _ # lower To set the sub ratings As foriV HA,T_I 4,T%PG, oriV Y7, you can further set the sub ratings to block specific elements of programming, rb set the sub ratings, follow the step below. Use •/1!'/_1/1_ repeatedly to select the to swtch between desired [View] rat ng, then and [Block]. press OK PIN code again in [Confirm PIN,] entry field, 22 Clock, ECO You can turn on ECO Node to conserve Use poweK Phase _1/1_ to adjust and [Phase] 1 Use A/V _- Use A/• to select [ECO],then [Clock] setting sett ng to mprove Cursor press OK, to select the desred mode, then press OK, the to stab lize the clarity of the • PC screen PC screen. Cursor Clock to decrease sr,ttir_£ to increase Phase vaue vaue • sett r_£ On Off Nov • You must set [Home] in [Location]. ,,_ p.23 Othetsu so, the sel¢ n£s you adjusted wil not be sdved when the un}t goes into stsndby mode. • You can also press ECO d mctly to swtch ,,B p.14 the desmd sort n_. fun-Link [hs PC Settings This funct between on lets you adjust the phase during 1 Use 2 Use A/• PC screen postion, clock to select [PC Settings], to select the then on allows our brand CEC) you to operate devices with the inked functions a fun Link feature and ths and PC nput. A/• (HDMI funct press OK. unit connecting through an HDNI cable. 1 Use A/• OK. to select [fun-Link (HDMI CEC)],then _- Use to select the desired 3 Adjust press setting you want to adjust, then press OK. 3 Adjust the following items. Auto Adjustment Use A/• to select [Adjust], then press OK. fun-Link the following sett ng, then press OK. terns. Control Set the [he A/V fun Link [On] following or [Off]. additional settings will be grayed desired setting, then out when you set to [Off]. Use A/• to select the 01_ press OK. / Se ects if you have connected an external device that s compat hie wth the fun-Lnk function. t D sabes all fun-Lnk Auto Device Off" You can set your • The horizontal/vertical PC screen are automat position, clock call• adjusted. and phase of the Use Horizontal Use Position,Vertical Position On _1/1_ to adjust. Cursor _11 Cursor • Horizontal Position to mow' PC scroerl oft to mow' PC screen rght Vertical Position to mow' PC scroerl down to move PC screen up devce to turn offby interlock desired setting, then ng from this unit's powen Off A/• to select the press OK. Your connected fun Link devce turns off automatica y when the unt £oes nto standby mode. Your cot, netted tun Link devce StdySon even f the unit goes into standby mode. 23 Auto TVOn This untwillturnonwhen thepower onsgnal issent fi'om your connected funLink device. Use •/• toselect thedesired sett ng, then press OK. On Ths unit turns on autom_Jt ca ywhen you turn on your- connected fun Link dev ce. Off Ths un_ Stays in standby mode even f you turn on your connected fun Lnk device. Device i_i;ilfl E-Sticker When you select (Electronic [Location] Sticker) to [Retail] store, E St cker s displayed. E Sticker can be turned effusing procedure 1 Use •/• to select [E-Sticker],then 2. Use •/• to select [Off],then below. press OK, press OK. Control You can operate some functions such as dsc playback or call up the menu of the connected dev ces, by using ths unit's remote control. tom Noe Use •/• to select the desired sett ng, then • If you seect [Home], press OK, On _'/ •/V / • / I_/OK/BACK'S/the Number buttons/ RED / GREEN / BLUE / YELLOW car, be used to centre your connected fun Lnk devices by ths unt's remote centre. Off E Sticker w ill not be displayed, q PLAYI_ /STOP II/FWDI_, /REV_I_/SKIP I_I/ SKIPI_I•/PAUSE I I/_=un-LInH OPTIONS Current Ths funct Software on shows Info what version of the software currently used. D sabes the device centre. Device 1 List This function lets you see the of connected dev ces. product model number Use •/• OK. to select [Current Software Info], then press or name 2. Confirm the version of the software currently used. >_These may di,_er depending on wha¢ product you purchased For example, 19NF30I B will be displayed [HDMI] instead of [HDMI 1], [HDMI 2] Location You must [Sound] set [Home] n ths sett ngs you adjusted setting. Otherwise, will not offthe 1 Use •/• to select [Location], 2 Use •/• to select the des red location, and after you unit. then press OK, then press OK, The unt w be set up with predefined selC}ngs for rc,t il d sp dys. In ths sett ng, you can set the backlight brighte_ The unt Home [Picture] be memorized turn Retail i_i!:!! s set to maximize the energy eff'c ency for home setting and it can be adjusted through a choice of picture and sound quality accord ng to your- p__,f_,mnce, Use •/• to select [English], [Espafiol] or [Fran_ais],then press OK. 24 Item Detail Press 1 to dispay f'e d€,ta s beow, [Name], [Album], [Date], [Size] and [Next]. {1_ This unt can play picture Use the USB storage (jPEG) device and video that contains (Motion those jPEG) [Hes, More Detail Press 1 agan to remove file details. FJes. Press 4 or OK to start the sde show, While the slide show is on, the following 1 Insert the USB storage this untThe 2 main Use A/y ]he h ghlghted storage device menu nto appears to select [USB] the automat tally. Press 2, then use • / • _2) Transitions name of your USB Use A/y OK, Press 4 or OK to stop the slide show. Sto While the slide,show is off, the following 2 settings will be d splayed. (_) Rotate Every press on :2 w 90 degrees, (3) Zoom Press 3,then use •/• to select the zoom factor (Ix, 2x or 4×), Press OK to set the zoom facto_ Video (JPEG) 1 A/y to select the desired file, and then (Motion Use A/Y press OK, JPEG) to select the desired file, and then press OK, MOVIE1 .avi Picture Yo_, USB jpg Supported @ @ Press 'OK • Press CH-to • The unit goes to the slide show To pause/play the Use the Number format; motion ipeg, 320 × 240, 30FPS • [b stop playback and return BACK "_, OK or CH +. to the file list, press key to play/pause • To toggle between [List] and [Thumbnails] the Number 2 button each time. • turn the p cture clockw se by to select [Picture] or [Video] and then press Picture [:_ Image1 Press 3,then use •IV to change the disp ay tme choosing flsm; [Short], [Medium] and [Long], ....... i: i_ 1 Use to select the transtion mode choos n£ fi_om; [None], [Dissolve], [Wipe right], [Wipe left], [Wipe up], [Wipe down], [Box in] and [Box out], press OK agah], (_3_ Slide time 3 2 settings will be d splayed. on and press OK, text will move to the device, then USB terminal Item automa*Jcall)4 slide show, press OK, buttons (1 through play back flom the begnnng. press 4} to see the file de'_ail (d}) or change the following se_ings (_}-_4}). See the description on the top of the nex_ coMsln, {1_ More Detail Detail Press 1 to dispay fie dotas beow, [Title], [Director], [Date] and [Duration], Press 1 agan to remove file details. 25 CONNECTING No_e DEVICES The unit recognizes only a USB storage dev ce, Do not use a USB hub or an extension cabe to connect an external hard ds]< drve to the unit, (Not supported,) A USB stol ge devce is alwd)'S nserted to ths unit d rectly. A USB storage devce is not suppled wth ttqs unt, W_, do not guarantee that all USB storage devices can be supported by this unt Be sure to keep a bad<up copy of the or g nal ties on your devce before you pd 7 tl,em back on ths unitW_' have no responsib lities tot- darr, sge or loss of your stored data, I'o protect your USB storage device files from being erased place the wrte plotect sliding tab in the protect posit on. When you ale ready to i emove a USB storase dev ce, at first turn the unit off so t w go into standby mode to dvod any damage to your data and the unit, A USB storage devce that requ res ts own dryer or the devce with a spec al system such as fingerpr nt recognit or, arc, not supported, Ths unit is not allowed to use the USB £orage device which requiles an extema power suppy (500mA or more), Up to 2GB (FA116) or 8GB (FA132) capacity can be supported, Up to I0,000 files or 1,000 fo ders wth I9 I'ierarch es can be Before you connect: Be sure other device the AC cord, power s connected properly before plugging n External Device Connection HDMI Connection HDMI connect HDHI (Higt, De£nit on lHulti Ylediantedac ) transports d gital vdeo on offers and mult the h ghest p cture qualit)4 high definition channel digital audio through a single cable, recogn zed, Up to 255 English characters can be lecognized. Ths unit does not support NTP(Hed h_nsfor Hotoco). Ths unit supports F/\H 6 and F_q32 file systems. !g! If the file s not supported, an error message appears, When the USB storage devce s not recogn zed, try reconnecting it again. Noton jPEG fie wth an extension of".dv" can only be recognized.An extensiof of".mov" is not supported, Ths unit doesn't support "pause", "forward" or"reverse" durng vdeo i!_}!il i?i_i (Motion jPEG) playback The files recorded <Picture (]PEG)> Upper mt <Video Video Zf_ : under the following specifications are required. 24 Negapxel (Motion JPEG)> • Size : 320 x 240 (QVGA) Blu-ray / DVD recorder with the HDMI output jack • Frame rate : 30 _s Audio • LPCM Sampn 8 fi-equenc7 (32 kHz, 44,I kHz or 48 kHz) Quant zation bit rate (I6 bit) $ For 32MF301B, you can also use the HDMI jack on the Rear Panel, HDMI-DVI Connection Ths unt can be connected to your device that has a ©VI term hal. Use an HDMI DVI conversion cable for this connection and it requ res audo cable for Analog Audio signal as well. cable receiver or satellite box with the DVI output _co HDMbDVI _ nversi?n i_i cable HDMI-DVI conversion cable audio cables jack i 26 Composite NoEe Use an HDHI cable wth the HDbl] !ego (a cert tied HDNI cable), Hgf, Speed HDNI cable s recommended for the better compatibility, For HDMI connection (use HDMI Input jack) Ths unit accepts ony signals n cornp ante wth connechon for wdeo connected devices unit's Composite Audio The unt accepts 480,480p, 720p, I080 and 1080p 24/30/60Hz of video s £r,als,and 32kHz, 44.1 kHz and 481<Hz of audio signs s, Ths unit accepts 5.1 chsrlne audo sgnal (Dolby Digta) and 2 chanr, e audo signa (LPCN), For HDMI-DVI Video Connection Compos_teVideo V_deo offers to the input L/R Input jacks below lack.When Au@o the Au@o devices connect connected to the Analog jacks right quality the ComposlteVideo then to the au@o cables to the connector only connect to the L Input lack. EIA861, camcoraer Video Connection dee connection If you connect picture connection Component vdeo jack, connect is monaura, The unt accepts 480,480p, 720p, I080 and I080p video sgna s, HDP11 DV] connection requires separate audo connect ons as we and the audo sgr, a s are converted from digita to aria og, DVI does not d splay 480 image whch is not n compliance wth EFA/CEA_861/861 B, ComponentV standard unit. If you connect below Audio tbe to the offers 1_ _x_ be12er picture quaity VCR for unit. unit's ComponentVideo Input }acks, cables to tbe Analog ComponentVJdeo Audo connector L/R Input jacks, ____j_gu_ component video OUT ] cables audio cables Whenever Ju must If you ou _'dVe Tr, osc Digital Audio (tO connr,ct d sconnect to thr, the Qompos£eVdeo (omDonen_ aCl<S connec_na, Output v aeo • may Input jack, InDU_ JACKS (Pb and cause of unstab}e Connection (]1_ taI D_OaclcaS_l_/_ only) /OU co[/[/ec]. at] en o This U[]I]. IO _nultl channel at] ex_ern_ digital audio device, au@o hke 5.1ch d g_tal broadcasting _ou[/c !i ii-- Blu-ray,DVD ..... With the component • The No/e this urlt accepts 480/480p/720p and I080 use a Cll_lIa aUGIO Loaxla 2x_eH]a c _lta aualo caDle ].C connect the unit aev_ces video output jacks of video sgnals PI), p cture, for connection, Dolby Digital decoder L c gltal audio coaxlal CaDle to you PC Connection This unt USB Storage Device is equpped unit to your wth a PC PC, you can use this unt Use aVGA cable stereo plug conversion min nputjack, for th sVideo lfyou connect ths as a PC montor: connection unt offers (Motion and t requires cable forAnalogAud 7hs a o signal as well. Insert jPEG) easy playback of p cture the USB stora;_e devce below, [USB] (}PEG) and video files. nto the USB term hal shown ulll. p.24 _]IF_jj personal computer (•} iiii iii iiii!_i i !ii......... !i!ii iii miniaudi°cable_ VGA cable should be |__t_l_with ferrite core. voA c.ble The following VGA 640 x 480 800 x 600 1,024 x /68 1,280 x 768 1,360 x /68 WXGA formats ,!!_}!!i iiiJii s gnals can be displayed: SVGA XGA Other video or nonstandard s gnals will 60Hz ii !!iiii i i i! not be displayed correctly. • Pease pul-chase the VGA cable that has afc, n_te coreL The follow ng operst ons may reduce nose, N oceAttach a f_,rr te col-e to the AC power cord of your PC, Unpu£ the AC power cord and use the buit in battery of your- PC. ii,iiii! 4 i 28 USEFULTIPS FAQ I_,i,l@l'_|,JI iri_lFi,i,i_l Check the antenna or cable connect on to the man unt, Check the batteries of the remote centre. Check #there s an obstacle between the infrared sensor window and the remote control, %st the signal output use [IR Signal Check], m_ p.30 If okay, then poss ble nfi-ared sensor troube, My remote control does not work. What should I do? • Aim the remote cor,trol d rectly at the n{rared sensor wndow Reduce the distar, ce to the unt Re insert the batteres with their polartes When thel-e s an inflated equipped cor,trol signa of this unit, (+/ or, the fi-ont of the ur_t. sgns) as indicated, device sucl, as PC near ths unit, t may ir,terrupt the remote Hove the r,frared equipped device away flora ths unit, change the ar,gle of the inf_-ared sensor or turn offthe infi-al-ed cornmun cat on funct on, How Come the Initia! Setup appears eyery tim e I turn o n th!s unit? N,Jke sul-e [Autoprogram] has been complete'd, m_ p.17 Autoprogram must be, completed when you set up the unt where previous y unava abe char, ne s are broadcast, Why can I not watch some RF signalTV programs. The selected channel may not be broadcasting, When [Autoprogram] s interrupted apd not competed, sure to complete the Autoprogram. m_-p.17 The selected channel cannot be vewed by the [Child for the, first time or move t to a Iocat on some ct,ar, r,els w pot be received. Hake Lock] sett ng. m_-p.20 The unit requ res some knd of antenna input.An indoor antenna (VHF/UHF), n external antenna (VHF/UHF) or an RF coaxal cable from your wa cabe/sate te box needs to be plugged nto the unit. HOW com e there is no image from the connected external devices? • Checkifthecorrectinpu_modeissee_edbypressirlgSOuRCEOrUsngCH÷/-.[SWitchingEach • When usng the ComponentY dee Connection check that the Green (Y), Bue (Pb/Cb) Cr) Connectors are connected to their corresponding colored jacks on the unit. • and Red (Pr/ Nany digta ch nneB have atemate channel numbers.The unit changes the numbers automatic I y to the ones s £nifying the bro dcast ng station channel numbe_These base numbers used re1-previous anaog broadcasts. (e.£. input oh#30 auto changes to ch#6.I) When I enter a channel number, it changes automatically. Why_re€+_!O .... t aspleyod entirely? Or, captions are delayed behind _he dialog. How can I set the clock ? There is no clocl< {unct on on ths unit. Troubleshooting If the unit does check the not following Guide perform chart properly when operated and all connections once If a power Mlum button's do not work. Power s ON n this calling for manual, service. Make sure the AC power cord is pugged n. Make sure that the AC outlet supplies the proper votage, pug another AC outlet to ensure that AC outer operates norton ly. No power Control as nstructed before but no screen mage, occurs, unplug the AC power cord for I mnute electrica app ante into the to now the unt to reset tsefi Hess only one button at a time. Do NO[ press more thn one button at the same time. Ensure that no buttons on the remote control am depressed and move ti eely. Check whether the connect on of the antenna, cabe lecewr Check whether a the cabes to the unit am connected to the correct output jack of your devce b' Bu ray/DVD recolde_: Hake sure that the se ected nput or satellte box s connected mode is connected to the working correct y. nput jack Check if your computer s NO] n sleep mode when the nput mode ofths any b'y on the keyboald to wake up your compute_ unit s n PC mode. [_p 29 Ii_'l ulii mm;_RiT_ai, _1| I I Check if the power is on, Check if the correct nput mode is selected. Check whether a the cabes to the unit arc, connected to the con ect output jack of your devce kr, Biu rdy/DVD I c'co_den L!! :q Vew other 1V channels. I he problem might be imted to the broadcast ng station ol- weal< sgnal stren_h, Unplu S the AC power cold and wait for about 1 minute, then plug the AC power cold and turn on the unt again, Check whether the connect on of the antenna, cabe rece w,r or satel tc, box s connected correct y, No p cture or sound Make sure that the se ected input mode is connected to the working nput jack Check if your computer s NO] n sleep mode when the nput mode ofths unit s in PC mode, i_p any key or, the keybo ld to wl<o up your computen b11<e sure that the sound is not muted. Press MUTE so that the volume bar and current volume leve w appear on the IV screen. N kc, sure that the volume volume, No coot Adjusted [Picture] or [Sound] sett ngs are not effc,ct ve every time the unit s turned on, s NO] set to [0] or [rdute]. If so, use VOL +/- Vew otherTV strength, channels.The problem might be imbed to the bloadcast n£ station or weal< sgnal Adjust [Color] n the man menu. You must set [Home] n [Location]. ,,,. p.23 Otherwise, the settings you adjusted wll not be memorized Electr cal ir'tet%rence after the unt goes nto standby mode. station or weal< sgnal For the best p cture qua }by,watch "High Definition" wide soeen programs, If the HD content s not ava abe, watch "Standard Definition" plograms nstead, You see a d storted an unUSUd sound. ,!!_}!!i i771 Vew otherTV channels.The problem might be imbed to the bl-oadcast ng station or weal< sgnal stren_h, Check if the audo cable s connected n correctly, P cture OK, sound poor p cture or hear You may be £ett n£ ntertrence I ghts, from lry moving the unit to another Iocat on to see fthis is the cause of the problem, Eectrca electr cal appliances, automob intetfft, rence fiom nearby app antes may es, motorcycles or fluorescent fleet picture quality, Ghosts, nes or streaks n picture Vew otherTV strep£th, You see "noise" or "trash" on the scroen, When the capab lities of the unit exceed the capab lities of the dgita broadcast n£, the signal will be ncreased to match the capab ties of the disp ay of the un t,This may cause nose or trash, D firw, nt color marks on theTV scroen Vew otherTV pixr, ation, You swtch to a diff.'rent the volume changes, This unt w nput and You swtch to a different nput and the screen sze changes, The d splay image does not covetthe entire screen. channels.The problem might be imted the voume level fl-om the last time you adjusted it, If the voume of the sound fl-om another This unt If y.... n [PC w to the bl-oadcast ng station or weal< sgnal channels.The problem might be imbed to the bloadcast ng station, missing data or memorize memorize C} flx_m nearby spp) antes may affect picture quality. Adjust [Contrast] and [Brightness] n the man menu. Vew otherTV channels.The problem might be imbed to the bloadcast}ng strength, Sound OK, picture poor to adjust the desil ed the view n£ mode -e usirl S the unt as a PC rnon Settings] are set correct}4 If you are watching [V or press FORMAT repeatedly devce is hgher toc fi-om mdke the sure or lower, then the oudness will change. ast tme thdt you [Horizontal usng the Compos}teV deo, Component to swtch var ous screen modes. Capt ons re displayed s a whte box, No caption s d splayed in the Cosed Caption supported program, Interfc,_-ence fi-om bui dings or weather Black box is disp ayed on theTV screen, The text mode is se ected for caption, Seect used the part Position] Video or cular input dnd [Vertical HDNI wth 480i condit ons may cause capt on ng to be ncomplete, Broadcasting stat on may shorten the program to insert advertisement. The cosed caption decoder cannot read the informat on of the shortened [CC-1], [CC-2], program, [CC-B], [CC-4] or [Off], modes. Position] Input, i _7"i 3O INFORMATION Glossary Maintenance ATSC Acronym that stapds fer Adv riced 1. evision Systoms Committee the r,dme of the di£td bl_adcdst ng standards. Aspect dnd Wpe The wdth of a TV screen m ative to its he gl,t. Convent onal TVs are 4:3 (n other wolds, theTV sol een is amo£ square): w deso een models ale, 16:9 (theTV scmer, s almo£ twce as wde as ts height), CEC the fiont unit with Ratio (Consumer Electronics Never liquid panel use a solvent near the d scolorat and other exter or surfaces of the a soft cloth. or alcohol. Do not spray nsect cide unt, Such chem cais may cause damage on to the exposed and sulfaces. Control) This dOWS yOU to operate the nked fur, ct or, s between our brand dev ces with CEC f_,ature and this un tWt, do not guarantee 100% interoperabilit/with other brands of CEC compliant dev ces. Wpe ComponentVideo This is a vdeo signa format that cor,veys each of 3 print pa colol-s of ight (red, bue and green) through dfferent sgnal nes.Th s Ilows the vewers to exper ence p ctule colors as origina as it s,There am several signa formats, ncludingY/Pb/Pr andY/Cb/Ct: Dolby Digital The system deve oped by Dolby Laboratories to compress d £}tal sound. It off_'rs stereo sound (2ch) or mult channel audo. the the Should the your problem nside. E-Sticker panel of the unit with panel, disconnect unt the AC become a soft cloth. power inoperat yourseEThere cleaning ve, do not try to correct are no user serviceable Call our toll flee customer cover of this manual Before cord. to locate support an author parts line found on the zed servce centen E St cker s showing set f_,atures, techn ca informat on, etc on thisTV set that is d splayed on the IV screen. Prey ously the nformat on was on a pdnted st cker that was put on the disp ay. H DMI (High-Definition Multimedia Interface) Interlace that supports II uncompressed, dgita audio/vdeo formats ir,cud ng sc,t top box, Bu rdy/DVD rocolder or dig}tal telev sion, over a sn£ie cable, H DTV (HighDefinition digtal remote camera control is not working ( nduding to see if it s sending a cellular high reso ution and hgh p cture out an nfrared With a digital (including NTSC Acronym that st4nds fol- Nationa l_,evis on Systems Committee the name of nalog broadcssti% standa/ds, Offthe si_-NTSC signa sarc, no longer beng sent by mdjor blsadcast n£ stations in the USA, and code A stored 4digt number that aows Audio access to parental contro f_,atures. Program) Second dud o channel de vorod sepdr3tely fl_m main-aud o channel. This audo chdnnel s used as an alternate n bilingua bl_adcdst ng, SDTV (Standard with 7, you can use a bultn camera) sgnal. Pont the Definition TV) Stdndald dig}td format that is smar to the NTSC p cture qualit}4 camera built-in cell phone D gital Camera cameras): towards remote controk Press any button on the remote control and look through the through the camera, sending out front remote infi ared diode infrared at the the control d spia}4 if the SAP (Secondary proped phone TV) Ultimatr, dig}td format that produces qua ty. PIN If the of the camera pulsat ng light appears the remote an IR signal. control s General Specifications TV format Closed Other /v,TSC/NTgObq Caption IV standard Terminals system Antenna Input Audio Input §15i 22/FCC (d gital CC) §q5,1 q 9 / FCC (analog CC) Channel coverage Terrestrial DTV Analog UHF 14-51 (NTSC) VHF 2-13 UHF 14-69 CATV (each channel has e.g, 2-fl Tuning system Input HDMI Input USB Input PC Input 3,A-W, (analogW+l _,W+84), x 2 HDM119pn x I USB x I DSub I5 pn x I (ROB) Digital Audio Output (coaxial) RCA jack x I frequency synthesized tuning system <19MF301B Headphone <32MF301 B> Output % inches x I(3,5mm) control DgM encodr,d rift-tired light system Operating Electrical Specification p.p (75 0) (•} Audio I/8 Remote 500mV only> Direct access keyboard, Programmable scan, and up/down Output HDM119pn !g! temperature 41 °F (5 °C) to 104% (40°C) gXA/,8 D x 2 Power requirements I20V- AC+/ I .SW, g_ [32MF301 B] 10%60Hz+/ 0,5% ,!!_}!!i <19MF301 B> Audio Output x 2 Power consumption II0W (maximum) LCD 32inches Dimensions <without base> (31,5 riches measured da£onally) <with base> Width 30.0nches Height Depth 19,6nches (497,0mm) 3,8 nches (95,0mm) Weight 16,10 bs, (760,0ram) (7,30k8) i!i"i_ 30.0nches (760,0mm) 21.4nches 9,5 nches (543,0mm) (240,4mm) 17,42 bs, (7,90 k£) [19MF301 B] Power notice and without If there language ons are sub/ect to change without our legal obligation. is a discrepancy will be English, between languages, the default consumption 40W (maximum) LCD 19ir, ches Dimensions <without base> Weight Designs and spedficat ii 0o ,vpp(-J50 ii!)!! <19MF301B> Channel Channel access 700 mV pp (750) <32MF301B> HDMI (F type) IV pp (750) Pr/Cr W+q _,W+94 A 5-A 1,5A Audio Y/VIDEO Pb/Cb (ATSC) 2_13 750 urlbdanced 500mV rms Input jacks for VIDEO RCA jacl< x 3 Z1 _,2,9, 3,1 _,3,9, etc,) Terrestrial VHF/UHF/C2qV RCA jack (L/R) x 2 Component/CornpositeVideo (ATSC/NTSC) VHF 2'! Specifications (18,5 nches measured dagor, ally) <with base> Width I8.9 nches (478.0mm) I8,9 nches (478,0mm) Height Depth IZgnches (324.5mm) 3.3 nches (82,0mm) 14Snches 8.3 nches (367.8mm) (208,3mm) 726 7,81 bs, (3S41<£) bs, (3,29 k£) 32 33 117' ( ) WARRANTY COVERAGE: This warranty below. obligation WHO IS COVERED: This product warranty or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold "AS IS" without warranty of any kind by including refurbished product sold "AS IS" by some retailers. is limited to the terms as set forth is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase ("Warranty Period") from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof. !iiii! This Limited Warranty does not cover: • Shipping charges to return defective product. • Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product. • WHAT This IS COVERED: warranty covers workmanship occurs Warranty repair Period. the to the date against remaining given, Note: defects item Any renewed new will or or within the either (1) refurbished original for replacement becomes product product sold carries requirements are inventory, or (3) this (90) When becomes a product your property. When day Failure be to or Damage from mishandled returning product. A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. A product used for commercial or institutional purposes (including but not limited to rental purposes). the whichever or part property a refund is • and the • is as refurbished limited sent or warranty. if all follow all • shipments or transit accidents when !i!l! Product lost in shipment and no signature verification can be provided. Failure to operate per Owner's Manual. TO OBTAIN ASSISTANCE... Contact the Customer Care Center warranty Z cause not within the control of the company. Damage or claims for products not being available for use, or for lost data or lost software. • the for Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other • property. identified only are from days warranty, you. (90) warranty workmanship ninety item and can met. for company a ninety most under product's company becomes or product. and repair • equivalent in current of the provided in materials of the product result is received functionally price or Replacement can in material company using parts coverage any your claim the product or replacement longer replaced original purchase portion exchanged, if a defect is at least products of the provides and original Replacement covered a valid its option, at no charge, parts comparable the products parts, or (2) exchange the product with a product or which has been manufactured from new, or ser- used refund and At product replacement that is new viceable new ii_iii! _ii!_!_!i _ : ,!!_i_!!i receipt i _7_i "" at: i!i"i 1-866-341-3738 requirements in delay. WHAT IS NOT TATIONS: COVERED This Limited Warranty - EXCLUSIONS AND LIHI- applies only to new company manufac- tured products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The company is not liable for any damage to or grams, data, or other information stored on any within the product, or other additional product ered by this warranty. Recovery or reinstallation data or other information is not covered under loss of any promedia contained or part not covof programs, this Limited REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states tal consequential or implied not apply do warranty not allow the damages, lasts, so exclusions or the allow above or limitation limitations limitations of incidenon or exclusions to you. Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product This warranty gives you specific legal nghts. You may have other nghts which vary [tom state/province to state/province. Printed n lhailand how long an may !i!iiill