Download Agilent Technologies B2902 Technical data

Subsystem Command Summary
Setting Source/Measure Unit
Command
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN?
Summary
Selects the trigger output for the status
change between the trigger layer and the
acquire device action.
Reset setting
EXT1
output=INT1|INT2|LAN|EXT1|EXT2|
EXT3|EXT4|EXT5|EXT6|EXT7|EXT8|
EXT9|EXT10|EXT11|EXT12|EXT13|
EXT14
:SENS[c]:TOUT:SIGN?
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT]?
Enables or disables the trigger output for
the status change between the trigger
layer and the acquire device action.
OFF
mode=1|ON|0|OFF
:SENS[c]:TOUT[:STAT]?
:SENS[c]:WAIT:AUTO mode
:SENS[c]:WAIT:AUTO?
Enables or disables the initial wait time
used for calculating the measurement
wait time for the specified channel. See
:SENS[c]:WAIT[:STAT].
ON
mode=1|ON|0|OFF
2- 20
Agilent B2900 SCPI Command Reference, Edition 2