Download 1 - Miller Electric

Transcript
FIRE OR EXPLOSION
can
result from
unit
on,
over,
combustible surfaces.
placing
1.
Do not locate unit on, over,
surfaces.
2.
Do not install unit
near
services,
or near
can cause
Have
electronic
injury.
Keep away from moving parts
2.
all doors, panels, covers, and
and securely in place.
such
Keep
and
equipment.
only qualified persons familiar with
equipment perform this installation.
The user is responsible for having a qualified
electrician promptly correct any interference
problem resulting from the installation.
If notified by the FCC about interference, stop
using the equipment at once.
Have the installation regularly checked and
1.
flammables.
1.
can
navigation, safety
computers,
communications
combustible
2.
MOVING PARTS
RADIATION
HIGH-FREQUENCY
interfere with radio
near
or
as
fans.
3.
guards closed
4.
maintained.
STATIC ELECTRICITY
on circuit boards.
1.
Put
on
boards
2.
grounded
or
can
wrist strap BEFORE
static-proof bags
ship PC boards.
OVERUSE
2.
Allow
can
cause
and boxes to store,
OVERHEATED
4
MAGNETIC
FIELDS
CURRENTS
can
1.
cooling period.
Follow rated
HIGH
pacemaker
Pacemaker wearers keep away.
Wearers should consult their doctor before
2.
near
Reduce amperage (thickness) or reduce
before starting to cut again.
FROM
affect
operation.
duty -c
plasma
going
cutting operations.
arc
SIGNIFICANT DC VOLTAGE exists after
removal of input power on inverters.
cycle
3.
Keep high-frequency source doors and panels
tightly shut, keep spark gaps at correct setting,
and use grounding and shielding to minimize the
possibility of interference.
handling
EQUIPMENT.
1.
5.
parts.
Use proper
move, or
damage parts
duty cycle.
Turn Off inverter, disconnect
1.
input
discharge
in
instructions
capacitors
input power,
according
Maintenance
Section
arid
to
before
touching any parts.
1-4.
Principal Safety Standards
Safety in Welding and Cutting, ANSI Standard Z49.1, from Ameri
Welding Society, 550 N.W. LeJeune Rd, Miami FL 33126
can
Safely and
Health Standards, OSHA 29 CFR 1910, from
tendent of Documents, U.S. Government
Safe
Handling
of
Compressed Gases
in
CGA
Cylinders,
Pamphlet
P-i, from Compressed Gas Association, 1235 Jefferson Davis
Highway, Suite 501, Arlington, VA 22202.
Superin
Printing Office, Washing
Code for
ton, D.C. 20402.
Recommended Practices for Plasma Arc Cutting, American Weld
AWS C5.2, from American Welding Society,
Safety
in
Welding
and
Cutting,
CSA Standard W117.2,
from Canadian Standards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale, Ontario, Canada M9W 1 R3.
ing Society Standard
550 N.W. LeJeune
Ad, Miami, FL
33126
Safe Practices For Occupation And Educational
Recommended Safe Practices for the
Cutting
Preparation for Welding and
of Containers That Have Held Hazardous
Substances,
Eye And Face Pro
tection, ANSI Standard Z87. 1, from American National Standards
Institute, 1430 Broadway, New York, NY 10018.
Welding Society Standard AWS F4.1, from American
Welding Society, 550 N.W. LeJeune Ad, Miami, FL 33126
American
Cutting And Welding Processes,
National Electrical Code, NFPA Standard 70, from National Fire
Protection Association, Batterymarch Park, Quincy, MA 02269.
1-5.
al Fire Protection Association,
02269.
NFPA Standard SiB, from Nation
Batterymarch Park, Quincy, MA
EMF Information
Considerations About
To reduce
Electric And
Welding And The Effects Of Low Frequency
Magnetic Fields
The following is a quotation from the General Conclusions Section
of the U.S. Congress, Office of Technology Assessment, Biological
Effects of Power Frequency Electric & Magnetic Fields
Background Paper, OTA-BP-E-53 (Washington, DC: U.S.
there is now a very
Government Printing Office, May 1989): .
large volume of scientific findings based on experiments at the
cellular level and from studies with animals and people which clearly
establish that low frequency magnetic fields can interact with, and
produce changes in, biological systems. While most of this work is of
very high quality, the results are complex. Current scientific
understanding does not yet allow us to interpret the evidence in a
single coherent framework. Even more frustrating, it does not yet
allow us to draw definite conclusions about questions of possible
risk or to offer clear science-based advice on strategies to minimize
or avoid potential risks.
procedures:
.
.
magnetic fields
in the
1.
Keep
2.
Arrange cables
3.
Do not coil
4.
Keep welding power
practical.
source
5.
Connect work
to
cables close
or
to
workplace,
together by twisting
one
clamp
as
following
operator.
body.
and cables
workpiece
the
taping them.
side and away from the
cables around the
drape
or
use
as
far away
as
close to the weld
as
possible.
About Pacemakers:
The above
wearers.
procedures are also recommended for pacemaker
Consult your doctor for complete information.
OM-182 701
Page
3