Download Muratec F-360 Specifications

Unique Switch 72 - Operation
Switch
Initial
Setting
7
0
6
0
5
0
4
0
3
0
2
0
1
1
0
0
Adjust
Usage/Comments
Factory use only
Factory use only
Factory use only
Factory use only
Transmit the consumables
order sheet automatically
0: No
1: Yes
When set to “1”, the machine automatically
transmits the consumable order sheets to the
distributor’s office.
Note: For this feature to work correctly, you must
register several items in this machine. (See “3.14.1
Set consumable order sheet,” page 3-118.)
Factory use only
Factory use only
Factory use only
Unique Switch 73 - Operation
Switch
Initial
Setting
Adjust
Priority of consumable order
sheet printing
7
0
6
0
0: Print after the current
printing job completed
1: Print immediately
Factory use only
5
0
Factory use only
4
0
Factory use only
3
0
Factory use only
2
0
Factory use only
Print consumable order sheet
0: No
1: Yes
1
0
0
0
Usage/Comments
When this switch is set at “0”, the machine does not
print consumable order sheet until the current
printing job is finished.
If this switch is set to “1”, the machine will print the
consumable order sheet automatically when the
drum cartridge is near end of its design life or the
toner cartridge is near empty.
When set to “1”, the machine automatically
transmits the consumable order sheets to the
distributor’s office.
Note: For this feature work correctly, you must
register several items in this machine. (See “3.14.1
Set consumable order sheet,” page 3-118.)
Factory use only
3-90