1
Download Muratec F-360 Specifications
Transcript
Installing the Internet Fax board Attaching the IF-300 to the machine which has installed an OP150(PCL Option) and an AL-200(Second Line Option). Note: Make sure to turn off the fax machine before proceeding the following steps. 1. Remove the module cover of the AL-200. 2. Disconnect the connection cable of the AL-200 from the IN connector on the AL-200 PCB. Then connect the connection cable of the IF-300 into IN connector. 3. Attach the bottom chassis of the IF-300 to the AL-200’s bottom chassis, as shown below. 6-42
