Download CommPact Control system User manual

Quick Reference Guide
Function
Press…
ARM
DISARM
OR
OR
FULL
INSTANT ARM
Additional Information
PART
PERIMETER
Hold down this key
until “Instant
Arming OK?” is
displayed. Then
Press .
[USER CODE]
One-Key Arming is disabled on the
Control System, enter your user
code when arming.
The default master code is 1234.
Instant arming cancels the entry
delay after Part or Perimeter
arming. This feature can be enabled
by your installer.
Entering your user code also
silences the siren in the event of an
alarm.
PANIC
ALARM
+
Press these buttons together and
hold them down to generate an
alarm.
FIRE
ALARM
+
MEDICAL ALARM
+
MENU MODE
then [USER CODE]
Use the menu navigation buttons
(/) until the required menu item
is displayed then press .
Alternatively, enter the shortcut
(e.g. 21 for Bypass Zones).
CHECK TROUBLE
CONDITIONS
Use this key scroll
the system
trouble list
Pressing  also silences any trouble
tones that may be sounded by the
system.
then 30
Enter 30 for PGM.
SWITCH PGM ON
SWITCH PGM
OFF
SERVICE CALL
GLOBAL
CHIME
+
“Dialing” is displayed. The number
dialed for the service call is
programmed by your installer.
then
Use the menu navigation buttons
(/) to choose enable or disable,
then press
RECORD
MESSAGE
.
then
After recording a message,
“Message Waiting” is displayed until
the message is played back.
then
The Message Center is an optional
feature that is included with certain
versions of CommPact Control
System.
PLAY
MESSAGE
ii