Download Cabletron Systems ATX Specifications

Token Ring Group
dot5StatsSingles
Counter Read-Only
{dot5StatsEntry 18}
The number of times the interface has sensed that it is the only station on the ring.
This will happen if the interface is the first one up on a ring, or if there is a
hardware problem.
dot5StatsFreqErrors
Counter Read-Only
{dot5StatsEntry 19}
The number of times the interface has detected that the frequency of the
incoming signal differs from the expected frequency by more than that specified
by the IEEE 802.5 standard.
4.1.3 Token Ring Timer Table
dot5TimerTable
{dot5 3}
This entire group is just minimally supported (i.e., the unit returns a GetResponse
with a noSuchName ErrorStatus).
4.1.4 Token Ring Tests
dot5Tests
{dot5 4}
There are no MIB variables in this group.
4.1.5 Token Ring Chipsets
dot5ChipSets
{dot5 5}
There are no MIB variables in this group.
ATX MIB Reference Guide
4-7