Download Adtech ADT-TP3340DJ Programming instructions

ADT-CNC4620 Programming Manual
Function description:
1) The position of thee cutting start (A1) should be specified before grooving cycle, or else the system takes
current point as the cutting start.
2) In the first grooving cycle, the tool isn’t retreated in axial direction when cut to the groove
bottom (B1)
3) If Z/W isn’t specified or movement is 0, the system considers Q(Δk) as 0 no matter whether
Q(Δk) is specified. In this case, only X axis acts and cuts to groove end, and the tool isn’t
retreated in axial direction.
4) Pecking style tool feeding cycle
B1 end point
A1 start point
Related parameters and notice:
1) If e is 0, the system doesn’t have radial tool retreating action.
2) The system reports error if X/U isn’t specified or the movement is 0.
3) If Δi is 0 or larger than entire groove depth (U/2), the system reports error.
4) The system reports error if Z/W is specified but Δk is larger than z axis movement
(W). If Δk is 0, it can be used for radial cycle drilling
5) If Δd is 0, the tool isn’t retreated in axial direction; if Δd is larger than Δk, the
system reports error.
G75 processing example: Fig. 3-11-12
Fig. 3-11-12 G75 Instruction Cutting Diagrma
O7501
G00X100Z0
M03S800T0101
G01X80Z-10
G75R3
G75X30Z-30P5Q2R1F500
G00X100Z20
M30
- 56 -