Download Europlex 3GS User guide

Panelman EXE Files
Panelman 3GS is designed to provide easy access to all
programming parameters of Europlex alarm panels. The
Panelman 3GS disk contains the following three .EXE files :
PMAN.EXE
This file is the Panelman 3GS program file and should be
installed on the PC hard disk. Panelman 3GS can be used
on-line while in communication with the panel or off-line
with no communications with a panel. Individual files can be
set up for specific panels or for general installation sites.
MAKE_LIT.EXE
As new hardware applications are developed, the 3GS system
software will be upgraded to facilitate this. For this reason it
will be necessary to configure the Panelman 3GS program to
recognise new versions of 3GS Software. You can achieve this
by running the MAKE_LIT program from the PC hard disk.
SETUSERS.EXE
This file allows the Master User to set-up ID codes and to
assign options to the system users. SETUSERS should be run
from the PC FLOPPY DRIVE after Panelman 3GS is installed
and prior to the handover of the system to the end user.
3