Download Simrad NX45 Specifications
Transcript
24 Navigation data • • BRG Bearing to Destination: Bearing to the destination from the boat. BRG Bearing to cursor: Bearing to cursor from boat • CDI • Set the CDI scale to the maximum distance that the boat should deviate from the plotted course. The chart and highway windows show the CDI lines, which are like a highway over the water where the boat will move. The windows show how far the boat has deviated from the plotted course and if the boat is approaching a CDI line. If the XTE alarm is enabled an alarm will sound if the boat reaches a CDI line. • COG Course Over Ground: Direction in which the boat is moving over the ground. • CTS Course To Steer: Optimum course to steer to return to the plotted course. • DTG Distance To Go: Distance from the boat to the destination. • ETA Expected Time of Arrival: At the destination, assuming that SOG and COG remain constant. • Course Deviation Indicator: When the boat is navigating to a point, the chart and highway windows show a parallel line on either side of the plotted course. These two lines are called the Course Deviation Indicator (CDI) lines. The distance from the plotted course to a CDI line is the CDI scale. DST Distance from boat to cursor • SOG Speed Over Ground: Current boat speed over the ground. This is not necessarily the same as the boat speed through the water nor the speed at which it is approaching the destination. • STR Steering: The difference between COG and CTS. • TTG Time To Go: The estimated time to reach the destination. • XTE Cross Track Error: The distance from the boat to the nearest point of the plotted course. XTE may have a letter: R means steer to the right to return to the plotted course, L means steer to the left. • VMG Velocity Made Good: The speed at which the boat is approaching the destination. Destination DTG (distance) VMG (speed) COG STR BRG CTS Plotted course Start 118 Boat position CDI line SOG (speed) Plotted course XTE (distance) CDI scale (distance) Boat position CDI line Destination Start Simrad NX40/45 Installation and Operation Manual CDI scale (distance)