Download Clarke CMS10S2 Operating instructions
Transcript
TABLE OF CONTENTS INTRODUCTION ..........................................................................2 IMPORTANT ................................................................................2 GUARANTEE ...............................................................................2 TABLE OF CONTENTS ..................................................................3 GENERAL SAFETY RULES .............................................................4 ADDITIONAL SAFETY RULES FOR MITRE SAWS ..........................5 SAFETY SYMBOLS .......................................................................7 ELECTRICAL CONNECTIONS .....................................................8 OVERVIEW ..................................................................................9 BEFORE USE ................................................................................10 Bench mounting .............................................................................. 10 Locking / Releasing the saw head ................................................ 11 Fitting the work clamp .................................................................... 11 Fitting work supports ........................................................................ 12 Dust extraction ................................................................................. 12 INSTRUCTIONS FOR USE .............................................................13 Body and hand position ................................................................. 13 Switching on and off ....................................................................... 13 BASIC SAW CUTS .......................................................................14 Vertical straight cross cut ............................................................... 14 Performing a sliding cut .................................................................. 15 Mitre cross-cut .................................................................................. 15 Bevel cuts ......................................................................................... 16 Mitre / Bevel Cuts ............................................................................ 16 Compound mitre cuts .................................................................... 16 Groove cutting ................................................................................ 17 Transporting ...................................................................................... 18 THE LASER GUIDE .......................................................................18 ADJUSTMENTS ............................................................................19 Checking and adjusting the mitre settings .................................. 19 Checking and adjusting the bevel settings ................................. 20 MAINTENANCE ..........................................................................22 Changing the saw blade ............................................................... 22 Changing the carbon brushes ...................................................... 23 Cleaning ........................................................................................... 23 ENVIRONMENTAL PROTECTION ................................................23 SPECIFICATIONS ........................................................................24 EXPLODED DIAGRAM ................................................................25 PARTS LIST ...................................................................................26 DECLARATION OF CONFORMITY ..............................................27 3 Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]