Download Mac OS X Server Installation and Setup Worksheet

Transcript
Configure Manually
Use this form if your network doesn’t have a DHCP server, or if you need to specify all
network connection settings manually for some other reason.
Network connection setting
Your information
Interface:
N Ethernet __ N AirPort N Other:
IP address:
Subnet mask:
Router:
DNS server:
Search domains (optional):
IPv6 options:
Use “Adjust IPv6 Options” on page 12
Ethernet options:
Use “Adjust Ethernet Options” on page 12
Configure Using BootP
Use this form if you want a Bootstrap Protocol server to assign an IP address and other
network connection settings to your server. BootP always assigns the same IP address
to a particular network port. It’s used primarily for computers that start up from a
NetBoot image.
Network connection setting
Your information
Interface:
N Ethernet __ N AirPort N Other:
IP address:
Provided by BootP server
DNS server (optional):
Search domains (optional):
IPv6 options:
Use “Adjust IPv6 Options” on page 12
Ethernet options:
Use “Adjust Ethernet Options” on page 12
Configure Lights-out Management (LOM)
Use this form if your server is an Xserve with a lights-out management (LOM) interface.
Network connection setting
Your information for channel 1 Your information for channel 2
IP address:
Subnet mask:
Router:
Lights-out management administrator
Name:
Password:
11